MeshCore

Commit Graph

Author	SHA1	Message	Date
Scott Powell	e233346bf0	* repeater: new "get/set loop.detect {off \| minimal \| moderate \| strict }"	3 months ago
Wessel Nieboer	10f2fecd45	Sync time with GPS every 30 minutes Unless your GPS is being spoofed there isn't really a downside to syncing more often with GPS. I understand the RTC is very stable, but especially with powersaving now clock drift is worse, we should sync more often.	5 months ago
Wouter Bijen	2cb08775c0	Clarify comment wording: 1 = direct (0 hops) Co-Authored-By: Claude Opus 4.6 <[email protected]>	3 months ago
Wouter Bijen	c016db86d5	Address PR review: subtract-1 encoding and clamp max_hops - Change > to >= so stored value 1 means direct/0-hop only (liamcottle) - Clamp max_hops to 63 on write since getPathHashCount() caps at 63 (robekl) - Update comments to reflect encoding: 0=no limit, 1=direct only, N=up to N-1 hops Co-Authored-By: Claude Opus 4.6 <[email protected]>	3 months ago
Wouter Bijen	00566741f6	Add configurable max hops filter for auto-add contacts Filter auto-add of new contacts by hop count (issues #1533, #1546). Setting is configurable from the companion app via extended CMD_SET/GET_AUTOADD_CONFIG protocol (0 = no limit, 1-63 = max hops). Co-Authored-By: Claude Opus 4.6 <[email protected]>	3 months ago
Wessel Nieboer	8a9a0dca5f	Fix GPS +8mA power leak when disabled (nRF52) On the T114, GPS_RESET (pin 38) is the same pin as PIN_3V3_EN. MicroNMEALocationProvider::begin() sets pin 38 HIGH (powering the 3V3 rail) but stop() never set it back LOW, leaving the GPS module powered even when disabled. Assert reset pin in stop() to mirror begin(), and guard _location->loop() behind gps_active check. Fixes meshcore-dev/MeshCore#1628	4 months ago
Wessel Nieboer	9bae9d0ed2	fix comment, we know the band now after checking LR1110 user manual	3 months ago
Wessel Nieboer	85f764a114	Calibrate configured frequency for AGC reset	3 months ago
Wessel Nieboer	f54948e06d	Also implement LR11x10 AGC reset Similar to SX126x but simpler.	3 months ago
Wessel Nieboer	b2032e11b6	make it more dry	4 months ago
Wessel Nieboer	9106ab46e1	reset noise_floor sampling after agc reset	4 months ago
Wessel Nieboer	a2dc2eb50c	when doing AGC reset, call Calibrate(0x7F) 1. warm sleep 2. wake to stdby 3. Calibrate(0x7F) to reset all internal blocks 4. re-apply DIO2 RF / boosted gain & register patch to make sure everything is as it was	4 months ago
Wessel Nieboer	f81ec4b14c	fix agc reset	4 months ago
Wessel Nieboer	d9e67222f5	prefs is 5 char length :nerd:	3 months ago
enricolorenzoni59	8ad17d1022	`gps sync` reply: fill buffer with text	3 months ago
Scott Powell	b67decfba0	* bug fix: Packet::writeTo(), Packet::readFrom()	3 months ago
Scott Powell	8737c64fdb	* Packet::copyPath() fix	3 months ago
Scott Powell	45564bad9b	* Dispatcher bug fixes	3 months ago
Scott Powell	a66773bac0	* CommonCLI: added "get/set path.hash.mode "	3 months ago
Daniel Novak	011edd3c99	Fix millis() wraparound in PacketQueue time comparisons PacketQueue::countBefore() and PacketQueue::get() use unsigned comparison (_schedule_table[j] > now) to check if a packet is scheduled for the future. This breaks when millis() wraps around after ~49.7 days: packets scheduled just before the wrap appear to be in the far future and get stuck in the queue. Use signed subtraction instead, matching the approach already used by Dispatcher::millisHasNowPassed(). This correctly handles the wraparound for time differences up to ~24.8 days in either direction, well beyond the maximum queue delay of 32 seconds.	3 months ago
Scott Powell	3e76161e9c	* refactor of Contact/Client out_path_len (stored in files), from signed to unsigned byte (+2 squashed commits) Squashed commits: [f326e25] * misc [fa5152e] * new 'path mode' parsing in Dispatcher	4 months ago
Kevin Le	39fb2902ec	Avoid negative _claims	4 months ago
Kevin Le	063f5056f2	Fixed RefCountedDigitalPin.h to release claim correctly. Ensure no negative claims number.	4 months ago
taco	1500a5a9cb	add get bootloader.ver command for nrf52	4 months ago
Wessel Nieboer	ffc9815e9a	Fix packet pool leak when rx queue is full PacketQueue::add() silently dropped packets when the queue was at capacity. The packet pointer was lost — never enqueued, never returned to the unused pool. Each occurrence permanently shrank the 32-packet pool until allocNew() returned NULL and the node went deaf. Return bool from add() and free the packet back to the pool on failure.	4 months ago
mesher-de	8e404e9aea	add advert.zerohop command to CLI	4 months ago
recrof	cafc212bb2	fix M5Stack Unit M6L build errors	4 months ago
Wessel Nieboer	0b1fd580f1	Fix double claim, eliminate dead code at compile time	4 months ago
Wessel Nieboer	d0720c63c2	Allow negative tx power Like SX1262 allows -9 dBm lowest, some allow lower but that probably isn't useful	5 months ago
Quency-D	e15503d50d	Fix low power consumption issues	4 months ago
taco	a342ab8437	nrf52: allow repeater to sleep when idle	4 months ago
taco	31ba971c60	only store advblob when adding/updating contacts	4 months ago
taco	c7eea3915d	fix: remove esp_wifi.h from esp32board.h saves ~500 bytes of dram and allows Tbeam to compile again	4 months ago
Max Litruv Boonzaayer	dd2a9044f3	Refactor display scaling definitions for HELTEC_VISION_MASTER_T190	4 months ago
João Brázio	edeafde51c	Fix: Correct validation logic in isValidName function	4 months ago
Piotr Małek	3845a1c021	Fix incorrect INA260 address in debug message	4 months ago
Scott Powell	5ff6e813bd	* Fix: RegionMap build fail on _max	4 months ago
Scott Powell	5627500988	* new "clkreboot" CLI command	4 months ago
Matthias Wientapper	0805a47f35	Add output of region cmd via lora cli Add cli commands "region list {allowed\|denied}"	4 months ago
liamcottle	7e24bd00b9	increase maximum flood advert interval to 168 hours (7 days)	4 months ago
liamcottle	ed589f9620	boot adverts are now zero hop instead of flood	4 months ago
Quency-D	c7ac16f0e3	Add v4-tft code.	4 months ago
Scott Powell	7ae164217c	* region names now don't need '#' prefix. (SHA still adds a '#' for back compat)	4 months ago
Chris	c16bcd2fe3	Expose a counter to track RadioLib receive errors This change counts when readData returns an err code other than RADIOLIB_ERR_NONE. In most cases this is going to be a CRC error. This counter is exposed in the `stats-packets` command, and in the repeater stats payload (4 additional bytes to the payload, which is now 56 bytes with this change. My incompetent robot claims the total payload size is 96 bytes (unverified but probably close).	4 months ago
taco	96ef5e5efe	allow set prv.key from remote, validate new prv.key	4 months ago
taco	988287bfd7	recalc ClientACL shared_secrets at startup	4 months ago
taco	6336bd5b72	refactor ClientACL and CommonCLI, add ClientACL::clear()	4 months ago
entr0p1	1f59e52880	nRF52840 Power Management - Phase 1 - Boot Low VBAT Voltage Lockout Added NRF52840 power management core functionality: - Boot‑voltage lockout - Initial support for shutdown/reset reason storage and capture (via RESETREAS/GPREGRET2) - LPCOMP wake (for voltage-driven shutdowns) - VBUS wake (for voltage-driven shutdowns) - Per-board shutdown handler for board-specific tasks - Exposed CLI queries for power‑management status in CommonCLI.cpp - Added documentation in docs/nrf52_power_management.md. - Enabled power management support in Xiao nRF52840, RAK4631, Heltec T114 boards	4 months ago
Scott Powell	3c27132914	* T1000e BLE - default node name is now the MAC address	4 months ago
Quency-D	fc61018d4d	Fix the issue of inconsistent I2C usage in the environmental sensor.	4 months ago

1 2 3 4 5 ...

852 Commits (5dddb8a3a13c277444eb9702b1b0041560c5dddf)