mirror/MeshCore - MeshCore - Всем привет, ну это уж ваше дело

Author	SHA1	Message	Date
Josiah VanderZee	e56c1b3d58	Do not perform redundant reset on ST7789 displays The `::init` method in the Adafruit ST7789 library is responsible to initialize the device. This includes performing a reset, which can be found in the Adafruit source for `Adafruit_SPITFT`. Before this change, MeshCore performed its own ST7789 display reset sequence, which consisted of three steps. * Pull reset low * Wait 10ms * Pull reset high Importantly, there was no fixed delay after pulling reset high. The ST7789 driver requires a delay (T<sub>RT</sub>) of 5ms in Sleep In Mode and 120ms in Sleep Out Mode before it will properly receive commands. When `Adafruit_SPITFT` resets the device after MeshCore has already reset it, the mandatory time may not have elapsed, leading to strange behavior. In the author's case, this issue caused the initial `fillScreen` to fail, such that the display showed an uninitialized framebuffer. This removes the MeshCore delay, leaving the responsibility of reset to `Adafruit_SPITFT`, where they have the correct delays in place with extra safety margin. The change was briefly tested by Josiah VanderZee and Ben Zignego on a custom hardware build using an nRF52840 Dongle and an Adafruit 4311 TFT display. The user button seemed to behave strangely, but the display looked correct.	1 month ago
Quency-D	c7ac16f0e3	Add v4-tft code.	5 months ago
Christophe Vanlancker	01eb8716af	fix(core): optimize GPS loop and add display GPIO safeguards	6 months ago
Scott Powell	3ddfdd477b	Revert "add heltec_v4 tft expansion box" This reverts commit `310618e689`.	7 months ago
Quency-D	310618e689	add heltec_v4 tft expansion box	7 months ago
WattleFoxxo	69e6d69798	Fix font and icon scaling issues for TDeck	8 months ago
WattleFoxxo	f100894882	LillyGo TDeck support	9 months ago