mirror/MeshCore - MeshCore - Всем привет, ну это уж ваше дело

Author	SHA1	Message	Date
Bill Plein	b588e3f1e3	Ikoka Nano Variant Created as a fork of the ikoka stick variant. - Updated for Ikoka Nano legacy pinout - Removed display support - Removed user button support - Retains I2C sensor support Tested with the ebytes E22 30W module, companion-ble and repeater firmware versions, with an I2C INA3221 power sensor.	8 months ago
kelsey hudson	bed311313a	Adding support for Ikoka Stick with Seeed Xiao nRF54 baseboard. Adds a new variant 'ikoka_stick_nrf' and associated support files. This is based on the Xiao nRF54 code with pin numbers and functions changed to suit the differences in hardware between the WIO SX1262 board and the Ikoka Stick. Sets the default LoRa transmit power to 9dBm to avoid burning up the frontend in Ikoka Sticks equipped with the Ebyte 33dBm S22 module on first boot. Adds support for an SSD1306 display connected to the display header. Note the display pinout is the same as the RAK4631 display header so make sure to use a display wired accordingly (aliexpress etc. SSD1306s typically have Vcc & GND reversed from what this board expects). Adds support for display rotation to SSD1306Display via a platformIO define. This support was added following the same paradigms found elsewhere in the code for rotating a display.	10 months ago
Florent	6735960a4e	xiao-nrf keep vbat_en to low to prevent issues ...	1 year ago
Florent de Lamotte	82bcd74932	xiao-nrf52 : initial support for meshcore initial config for xiao_nrf52 repeater role for xiao-nrf52 xiao-nrf52 correction on bat voltage xiao-nrf52 this file should not be here ...	1 year ago