MeshCore

Commit Graph

Author	SHA1	Message	Date
taco	84c2cfdcf2	fix: revert swapped GPS pins reverted GPS pin behaviour and swapped GPS pins for tbeam variants.	12 months ago
cod3doomy	218b96e4aa	T-Beam refactor There is a lot to this PR, so if there are any questions let me know. The idea here is to merge T-Beam fw so that there is less redundant code. Most versions (except the 0.7) share PMU code, init sequence, and most IO pin definitions. - Merged all T-Beam board.h files into one TBeamBoard. - Added PMU code to identify different AXP chips. - Modified "lilygo tbeam SX1276" variant to cover all T-Beam SX1276 versions - Modified "lilygo tbeam SX1262" variant to cover all T-Beam SX1262 versions - Enabled GPS on all T-Beam versions/models - Enabled BME280 on the Supreme I am also updating EnvironmentSensorManager to allow for boards that do or don't have GPS enable pins, as well as a PERSISTANT_GPS define check for boards that want GPS to stay active after boot.	12 months ago
Scott Powell	b1ca3d1eb1	* new PAYLOAD_TYPE_MULTIPART * experimental double ACK's (at each hop), sent 300ms apart (direct mode only)	12 months ago
Scott Powell	478a57a6bd	* AdvertDataParser: lat/lon can now be zeroes	12 months ago
Scott Powell	9df3c8c663	* companion: new 'advert_loc_policy' pref. Defaults to ADVERT_LOC_NONE (ie. do Not share location in adverts)	12 months ago
JQ	3719c0983c	increase delay slightly	1 year ago
JQ	d680852c99	fix t114 display flicker	1 year ago
Scott Powell	205624824a	* added std_init() to CustomSX1268	1 year ago
taco	14ff7bfbcd	added std_init to CustomLLCC68.h	1 year ago
taco	83842e4b25	fix: EnvironmentSensorManager.cpp: don't update location if GPS is turned off. previously the location would always snap to the last heard GPS location after GPS had been on.	1 year ago
Rob Loranger	52a579a366	fix Heltec v2 getBattMilliVolts	1 year ago
Rob Loranger	e5ecf29d0c	return range with advert interval set error updates both local and flood advert preference setting errors to include the allowable range and time units	1 year ago
Rob Loranger	f30698eacb	add time output to both clock sync and time <epoch> cli	1 year ago
Rob Loranger	dbee0d8b8e	update ADC multipler to fix voltage reading	1 year ago
Scott Powell	85b164bcf1	* PicoW refactor, now using radio.std_init()	1 year ago
Scott Powell	b865ac6c23	* refactored SensorManager::toggleGps()	1 year ago
taco	e7b0e9e526	refactor: promicro with CustomSX1262::std_init() added check in CustomSX1262.h to support both txco and non-txco radios switched promicro to use CustomSX1262::std_init()	1 year ago
Florent de Lamotte	588a986976	t1000e: gps toggle not using board class	1 year ago
Florent de Lamotte	b65b4d51eb	Apply refactoring to xiao_nrf52 and xiao_s3	1 year ago
Scott Powell	587d9d8818	* added CustomSX1262::std_init() * refactored variants to use std_init(): heltec_v3, t114, xiao_c3	1 year ago
Florent de Lamotte	8765b3d040	Gps toggle on 4 clicks	1 year ago
Scott Powell	e6ce3c896d	* companion: new CMD_GET_ADVERT_PATH -> RESP_CODE_ADVERT_PATH	1 year ago
Scott Powell	9363478d6f	* noise floor can now be queried even when int.thresh = 0	1 year ago
João Brázio	24464d0c4e	Update VBAT schematic	1 year ago
João Brázio	110bd49407	VBAT schematic	1 year ago
João Brázio	3448db6e36	Rename LED pin	1 year ago
João Brázio	8f6b2b75d7	Waveshare RP2040-LoRa board support	1 year ago
Scott Powell	466bd6d596	* fix for when AGC reset is disabled (interval = 0)	1 year ago
Scott Powell	32ca3dc9d0	* repeater and room server: new CLI setting "agc.reset.interval" (seconds)	1 year ago
JQ	e1ceaab7ed	add TX led to thinknode M1	1 year ago
liamcottle	4b9eac81c6	fix 150mA power draw on ThinkNode M1	1 year ago
Scott Powell	6e0b505a2a	* companion: refactor of all filesystem access to new DataStore module	1 year ago
Scott Powell	9bcab0949e	* noise floor lower bound now clamped to -120	1 year ago
Scott Powell	5d15a68d0d	* SERVER_RESPONSE_DELAY now applied to: login responses, companion telemetry responses	1 year ago
Scott Powell	0535919d63	* Mesh: reciprocal path send now with slightly less priority and 500ms delay	1 year ago
Scott Powell	75503ed52a	* Companion now can be configured with TXT_ACK_DELAY (default is 200ms)	1 year ago
Scott Powell	3749264e07	* MicroNMEALocationProvider: clock param now NULL by default	1 year ago
Florent	14cd4ea010	t1000: remove sync custom var	1 year ago
Florent	49da6957b5	micronmea: was using global rtc_clock to sync instead of _clock	1 year ago
Florent	31cbf9ed0e	gps : sync time on fix	1 year ago
Florent	92c296308a	wioe5: integrate sensor in sensor mgr	1 year ago
Scott Powell	6481ab1e31	* MicroNMEALocationProvider: clock param now NULL by default	1 year ago
Florent	1ac03f5592	t1000: remove sync custom var	1 year ago
Florent	c42e414a09	micronmea: was using global rtc_clock to sync instead of _clock	1 year ago
Florent	4c6f146b8b	wioe5: integrate sensor in sensor mgr	1 year ago
JQ	9cfeb6285f	better fonts for GxEPDDisplay	1 year ago
Florent	08aad7338b	gps : sync time on fix	1 year ago
recrof	585558a9bb	added basic support for LilyGo Tlora C6	1 year ago
JQ	d47c0cfccf	add scaling to bitmaps for EPD display, and enable buzzer for Thinknode M1	1 year ago
Scott Powell	b3d78ac8a7	* interference threshold now stored in prefs, CLI: set/get "int.thresh"	1 year ago

... 5 6 7 8 9 ...

832 Commits (10b120486f67eb8606dc1926e4f409ef96bdaa5d)