MeshCore

Commit Graph

Author	SHA1	Message	Date
jankowski-t	4541380632	Support MeshAdventurer Added support for MeshAdventurer, including radio, display, button, GPS, voltage reading	11 months ago
Scott Powell	187eea1b18	* Preamble now 16 (for most variants)	11 months ago
recrof	9530744ff4	add support for BMP280 temperature+pressure sensor	11 months ago
recrof	07f25ccac8	sx1276 boards: migrate to std_init()	11 months ago
Florent de Lamotte	0f259d3b51	CustomSX1262: fix typo that would prevent compile when TXEN or RXEN is not set	11 months ago
Scott Powell	55ff69bd25	* RAK: 'start ota' returned MAC address was reversed	11 months ago
Florent	8ccd4f3660	stm32: implement halt and reset	11 months ago
Scott Powell	556051955d	* ESP32Board: added support for Neopixel TX led	12 months ago
Scott Powell	b37c8017d9	* Fix: /helpers/esp32/TBeamBoard was breaking non-TBeam builds	12 months ago
Florent	d94f469d53	wio_e5_mini: led and rescue cli	12 months ago
taco	84c2cfdcf2	fix: revert swapped GPS pins reverted GPS pin behaviour and swapped GPS pins for tbeam variants.	12 months ago
cod3doomy	218b96e4aa	T-Beam refactor There is a lot to this PR, so if there are any questions let me know. The idea here is to merge T-Beam fw so that there is less redundant code. Most versions (except the 0.7) share PMU code, init sequence, and most IO pin definitions. - Merged all T-Beam board.h files into one TBeamBoard. - Added PMU code to identify different AXP chips. - Modified "lilygo tbeam SX1276" variant to cover all T-Beam SX1276 versions - Modified "lilygo tbeam SX1262" variant to cover all T-Beam SX1262 versions - Enabled GPS on all T-Beam versions/models - Enabled BME280 on the Supreme I am also updating EnvironmentSensorManager to allow for boards that do or don't have GPS enable pins, as well as a PERSISTANT_GPS define check for boards that want GPS to stay active after boot.	12 months ago
Scott Powell	478a57a6bd	* AdvertDataParser: lat/lon can now be zeroes	12 months ago
Scott Powell	9df3c8c663	* companion: new 'advert_loc_policy' pref. Defaults to ADVERT_LOC_NONE (ie. do Not share location in adverts)	12 months ago
JQ	3719c0983c	increase delay slightly	12 months ago
JQ	d680852c99	fix t114 display flicker	12 months ago
Scott Powell	205624824a	* added std_init() to CustomSX1268	12 months ago
taco	14ff7bfbcd	added std_init to CustomLLCC68.h	12 months ago
taco	83842e4b25	fix: EnvironmentSensorManager.cpp: don't update location if GPS is turned off. previously the location would always snap to the last heard GPS location after GPS had been on.	12 months ago
Rob Loranger	52a579a366	fix Heltec v2 getBattMilliVolts	12 months ago
Rob Loranger	e5ecf29d0c	return range with advert interval set error updates both local and flood advert preference setting errors to include the allowable range and time units	12 months ago
Rob Loranger	f30698eacb	add time output to both clock sync and time <epoch> cli	12 months ago
Rob Loranger	dbee0d8b8e	update ADC multipler to fix voltage reading	12 months ago
Scott Powell	85b164bcf1	* PicoW refactor, now using radio.std_init()	12 months ago
Scott Powell	b865ac6c23	* refactored SensorManager::toggleGps()	12 months ago
taco	e7b0e9e526	refactor: promicro with CustomSX1262::std_init() added check in CustomSX1262.h to support both txco and non-txco radios switched promicro to use CustomSX1262::std_init()	12 months ago
Florent de Lamotte	588a986976	t1000e: gps toggle not using board class	12 months ago
Florent de Lamotte	b65b4d51eb	Apply refactoring to xiao_nrf52 and xiao_s3	12 months ago
Scott Powell	587d9d8818	* added CustomSX1262::std_init() * refactored variants to use std_init(): heltec_v3, t114, xiao_c3	12 months ago
Florent de Lamotte	8765b3d040	Gps toggle on 4 clicks	12 months ago
Scott Powell	e6ce3c896d	* companion: new CMD_GET_ADVERT_PATH -> RESP_CODE_ADVERT_PATH	12 months ago
Scott Powell	9363478d6f	* noise floor can now be queried even when int.thresh = 0	12 months ago
João Brázio	24464d0c4e	Update VBAT schematic	12 months ago
João Brázio	110bd49407	VBAT schematic	12 months ago
João Brázio	3448db6e36	Rename LED pin	12 months ago
João Brázio	8f6b2b75d7	Waveshare RP2040-LoRa board support	12 months ago
Scott Powell	466bd6d596	* fix for when AGC reset is disabled (interval = 0)	12 months ago
Scott Powell	32ca3dc9d0	* repeater and room server: new CLI setting "agc.reset.interval" (seconds)	12 months ago
JQ	e1ceaab7ed	add TX led to thinknode M1	1 year ago
liamcottle	4b9eac81c6	fix 150mA power draw on ThinkNode M1	1 year ago
Scott Powell	6e0b505a2a	* companion: refactor of all filesystem access to new DataStore module	1 year ago
Scott Powell	9bcab0949e	* noise floor lower bound now clamped to -120	1 year ago
Scott Powell	5d15a68d0d	* SERVER_RESPONSE_DELAY now applied to: login responses, companion telemetry responses	1 year ago
Scott Powell	0535919d63	* Mesh: reciprocal path send now with slightly less priority and 500ms delay	1 year ago
Scott Powell	75503ed52a	* Companion now can be configured with TXT_ACK_DELAY (default is 200ms)	1 year ago
Scott Powell	3749264e07	* MicroNMEALocationProvider: clock param now NULL by default	1 year ago
Florent	14cd4ea010	t1000: remove sync custom var	1 year ago
Florent	49da6957b5	micronmea: was using global rtc_clock to sync instead of _clock	1 year ago
Florent	31cbf9ed0e	gps : sync time on fix	1 year ago
Florent	92c296308a	wioe5: integrate sensor in sensor mgr	1 year ago

1 2 3 4 5 ...

432 Commits (00ebb090e76f1836b38ed48b4e29041e23849b46)