MeshCore

Commit Graph

Author	SHA1	Message	Date
João Brázio	75895895f0	Add USE_SX1262 flag to multiple platformio.ini configurations	3 months ago
João Brázio	9a95e25ef2	Remove unused RX boosted gain mode functions and related preprocessor directives across multiple variants	3 months ago
dylan	f720338c03	Fix WioTrackerL1 BLE companion: route sensors to Grove I2C bus (Wire1) Sensors connected via the Grove I2C connector (D18/D17) were not detected because the firmware scanned the OLED I2C bus (Wire, D14/D15) by default. Adding ENV_PIN_SDA/SCL flags directs EnvironmentSensorManager to use Wire1, matching the physical Grove connector pinout. Co-Authored-By: Claude Opus 4.6 <[email protected]>	4 months ago
João Brázio	71136671bd	Implement remote lna toggle cli cmd	4 months ago
Wessel Nieboer	d0720c63c2	Allow negative tx power Like SX1262 allows -9 dBm lowest, some allow lower but that probably isn't useful	5 months ago
Scott Powell	f46f0d0ed1	* WIO tracker l1: BLE companion. default node name now MAC address	4 months ago
Frieder Schrempf	4f46ec75dd	Remove NRF52BoardOTA class and integrate it into NRF52Board As all NRF52 boards now have OTA support, let's remove the subclass and integrate it into the base class. Signed-off-by: Frieder Schrempf <[email protected]>	6 months ago
Frieder Schrempf	b024b9e1a1	Deduplicate NRF52 startOTAUpdate() The startOTAUpdate() is the same for all NRF52 boards. Use a common implementation for all boards that currently have a specific implementation. The following boards currently have an empty startOTAUpdate() for whatever reasons and therefore are not inheriting NRF52BoardOTA to keep the same state: Nano G2 Ultra, Seeed SenseCAP T1000-E, Wio WM1110. Signed-off-by: Frieder Schrempf <[email protected]>	6 months ago
Frieder Schrempf	e3bb225efb	Deduplicate DC/DC regulator enable for NRF52 boards Some NRF52 boards are able to use the internal power-efficient DC/DC regulator. Add a new class that can be inherited by board classes to enable this feature and reduce the power consumption. Signed-off-by: Frieder Schrempf <[email protected]>	6 months ago
Frieder Schrempf	93d1560d14	Use common NRF52 begin() and deduplicate() startup reason init Use a common begin() method that can be called from derived classes to contain the shared initialization code. Signed-off-by: Frieder Schrempf <[email protected]>	6 months ago
Frieder Schrempf	87b0e432bb	Deduplicate reboot() for NRF52 boards The reboot() method is the same for all NRF52 boards. Use a shared implementation. Signed-off-by: Frieder Schrempf <[email protected]>	6 months ago
Kevin Le	4504ad4daf	Added default temperature from ESP32 MCU and NRF52 MCU Added NRF52Board.h and NRF52Board.cpp Modified NRF52 variants to extend from NRF52Board to share common feature	6 months ago
Florent de Lamotte	6db57677f9	tracker_l1: enable dc/dc converter	6 months ago
Florent	7d62a27836	uitask: bring back buzzer toggle on tracker l1	8 months ago
Scott Powell	cd920693ec	* UITask: new UI_HAS_JOYSTICK * MomentaryButton: new constructor 'multiclick' param * WIoTrackerL1: now just use joystick, joystick press for KEY_ENTER, no multi-click for snappier UI	8 months ago
liamcottle	0307b6119e	increase MAX_NEIGHBOURS from 8 to 50	8 months ago
taco	a3e6b79c2f	Revert addition of ENV_PIN_SDA	8 months ago
Florent	611d61b6c6	tracker_l1: fix bme226 init in ESM to include all sensors	9 months ago
Florent	0cb34740d2	tracker-l1: correct bad definition for PIN_GPS_EN	9 months ago
Florent	f9543bb7bb	tracker_l1: support for EnvironmentSensorManager	9 months ago
Florent	59ea6cdb89	wio-l1-eink initial support	9 months ago
João Brázio	510472bfa0	Normalize repeater target names	9 months ago
taco	f92bd0db9e	fix inconsistencies across nrf companion roles	9 months ago
taco	e8314c9c8c	new ldscript for extrafs nrf companion envs	9 months ago
taco	accd1e0a97	nrf52 targets: increase limits for contacts and channels	9 months ago
taco	bdfe9ad27b	switch to using QSPI bus for external flash	10 months ago
taco	1f20722f51	fix: wio tracker L1: tidy platformio.ini	9 months ago
taco	cb8ca91d27	WioTrackerL1: add joystick left and right for new UI	10 months ago
taco	8f1ccb65ae	WioTrackerL1: add poweroff support	10 months ago
Scott Powell	76a53bf84d	* Wio-e5-mini: ui-orig * WioTrackerL1: ui-new	10 months ago
Scott Powell	e14b022a7c	* original UITask now in /ui-orig folder	10 months ago
taco	86671c0ff8	Support NewUI on WioTrackerL1	10 months ago
taco	a49b5aaba7	fix: wrong QSPI pins for wio tracker l1	10 months ago
taco	296a1e45fb	fix: Wio Tracker L1: correct joystick press button pin	11 months ago
taco	3f996ef4fc	fix: Wio Tracker L1: add DIO2 as rfSwitch and correct TCXO voltage.	11 months ago
recrof	6be8e19a9f	move radiolib wrappers to dedicated directory	11 months ago
taco	78cd655789	Seeed Wio Tracker L1: initial support	11 months ago

41 Commits (main)