MeshCore

Commit Graph

Author	SHA1	Message	Date
liamcottle	54234b5837	implement matrix builds for faster firmware releases	3 weeks ago
Florent	fec88e1300	fix tenstar c3 repeater build	3 weeks ago
Florent	3ee2f77877	restore display and radio poweroff in ui	3 weeks ago
Florent	2efb3af69b	repeater: poweroff on long press	4 weeks ago
fdlamotte	9e66a2e246	Merge pull request #2895 from IoTThinks/MCdev-Fixed-poweroff-to-uA-202607 Fixed hibernate / poweroff for BLE companions and repeaters to stay at uA	3 weeks ago
entr0p1	4fafcd0e23	Lilygo T-Echo Lite - Enable nRF52840 DC-DC - board idle usage reduced from ~12mA to ~7mA	3 weeks ago
Scott Powell	cea246d0eb	* super fast ST7735 display driver	3 weeks ago
entr0p1	584f9e909b	Lilygo T-Echo Lite - Change SX1262 to use LDO instead of DC-DC (DCC pin on SX1262 not wired in, according to schematic)	3 weeks ago
Kevin Le	35f654ced3	Fixed hibernate/powerOff for ESP32 boards to stay at uA	3 weeks ago
Kevin Le	6b205da4e9	Added missing driver/rtc_io.h	4 weeks ago
Kevin Le	eec75eab31	Cleanup Poweroff for NRF52 boards	4 weeks ago
Kevin Le	7d7de88707	board->powerOff() is sufficient to power off radio, display, GPS and components	4 weeks ago
Kevin Le	73b7367e45	Put powerOff to NRF52Board	4 weeks ago
Kevin Le	a92046b0eb	Put powerOff and enterDeepSleep to ESP32Board	4 weeks ago
liamcottle	57563ab8f9	update qr code docs	4 weeks ago
liamcottle	b40968a0f0	stop tracking vscode extensions.json	4 weeks ago
Quency-D	2867542cfa	Merge branch 'dev' into solar-watchdog	4 weeks ago
ripplebiz	61e21462aa	Merge pull request #2867 from entr0p1/feature/sx1262-ldo-support SX1262 LDO Support	4 weeks ago
Naomi Smith	3af5ffe119	Fix GPS and LEDs on ThinkNode M3 GPS support was implemented incorrectly for the ThinkNode M3. The reset pin was being driven when it should be left floating for this unit. The enable pin also wasn't being picked up by `MicroNMEALocationProvider` because of a mismatch in constant naming conventions. I did a general cleanup of the GPS and ThinkNode M3 bring-up code so that constant names line up and "*_ACTIVE" constants are used consistently vs hardcoding `HIGH`/`LOW`. After making these changes, serial data immediately starts streaming in from the NMEA on boot and GPS detection just works. LED handling was also not quite right for the ThinkNode M3. The LoRa TX LED was being driven high to turn it on when it should actually be driven low. I changed the code to use the `LED_STATE_ON` constant and also added a little code to the shutdown path to properly make sure that all LEDs are turned off. Tested and confirmed working on real hardware. Resolves both #1864 and #2879.	4 weeks ago
Liam Cottle	acdf4e5bdc	Merge pull request #2372 from jirogit/fix/region-save-return-value fix(RegionMap): save() returns actual write success instead of hardcoded true	4 weeks ago
ripplebiz	33fdf67e4d	Merge pull request #2874 from neilalexander/neil/replyregion Fix `recv_pkt_region` incorrect usage	4 weeks ago
Neil Alexander	0d7379520f	Fix `recv_pkt_region` incorrect usage The `recv_pkt_region` is set when processing a flood packet in `filterRecvFloodPacket` but direct/non-flood packets would never pass through that function, so the pointer was not cleared for them. `sendFloodReply` would then later use it blindly, which meant that the response would either inherit the region from the last flood packet, or refer to a non-initialised pointer if no region floods had been received yet.	4 weeks ago
ripplebiz	affe61dc3b	Merge pull request #2880 from ckoehler/push-sonzsorqmwqz refactor: split MeshTables::hasSeen into pure query + markSeen	4 weeks ago
Christoph Koehler	4f701b7aec	refactor: split MeshTables::hasSeen into pure query + markSeen hasSeen() was simultaneously a predicate and a mutator — it inserted the packet hash on every miss, making five call sites that only wanted to mark a packet as sent call it with the return value discarded. Split into: - wasSeen() — pure predicate, no side effects - markSeen() — explicit insert All query sites now call markSeen() immediately after wasSeen() returns false, preserving identical runtime behaviour. The five mark-only send sites (sendFlood, sendDirect, sendZeroHop x2) now call markSeen directly. Also fixes three bridge sites (BridgeBase, ESPNowBridge, RS232Bridge) that had the same query+implicit-insert pattern. Tests: add test/test_mesh_tables/ covering wasSeen purity, markSeen, dup stats, and clear. Update SHA256 mock to produce deterministic output (previously finalize() was a no-op). Add Packet.cpp to native build filter.	4 weeks ago
Liam Cottle	dd87371574	Merge pull request #2873 from ckoehler/fix/nix-devshell build: add gcc, gtest to nix shell, fix native test framework	4 weeks ago
Christoph Koehler	4f7c1cb88f	build: add gcc, gtest to nix shell, fix native test framework	1 month ago
entr0p1	2cb3a29fa8	SX1262 LDO Support - Added build flag "SX126X_USE_REGULATOR_LDO" (set to 1 to enable) to use LDO for the SX1262 radio instead of DC-DC when the DCDC pin isn't wired up (e.g. t-echo lite) - Added additional debug mode diagnostic messages during SX1262 init to better highlight faults	4 weeks ago
Liam Cottle	1869b57d62	Merge pull request #2853 from HDDen/dev Add Data-Type to number_allocations.md	1 month ago
HDDen	58b0f7df9c	Update number_allocations.md	1 month ago
HDDen	bc35208682	Update number_allocations.md Added Data-Type range for MeshCore Images codec (range is for small reserve to future versions)	1 month ago
Scott Powell	4f8cb8db78	* ACK packets being 'clipped' (in Dispatcher send). Needed to extend max_airtime timeout calc for short packets	1 month ago
Liam Cottle	5ff39c6243	Merge pull request #2570 from IoTThinks/MCdev-Fixed-flashmode-XiaoC6-202605 Added flash_mode=dio to avoid boot loop when flashing using merge.bin	1 month ago
Liam Cottle	dc200cf22d	Merge pull request #2639 from sefinek/fix/typos-in-comments fix: fix typos in source code comments	1 month ago
Liam Cottle	62b95b4e48	Merge pull request #2844 from oltaco/fix-rx-boosted-gain Fix for Rx boosted gain on LR1110	1 month ago
taco	f3d4d8cd5e	always save boosted gain setting	1 month ago
Quency-D	341aa5e0f4	Merge pull request #14 from meshcore-dev/dev merge Dev	1 month ago
Liam Cottle	3d4eec4a6a	Merge pull request #1194 from ViezeVingertjes/nibble_zero_connect Added support for the nibble zero connect	1 month ago
taco	b07aba7937	fix: report error when rxgain setting is unsupported or rejected	1 month ago
taco	1f9bb67400	return bool when setting rx boost	1 month ago
ViezeVingertjes	b8f1fad654	Add trailing underscore to nibble_screen_connect env names to exclude from automatic builds	1 month ago
ViezeVingertjes	eb938a9b78	Address review comments and sync with dev	3 months ago
ViezeVingertjes	69df5c7a95	Remove NeoPixel configuration as its unused.	6 months ago
ViezeVingertjes	9c7d71b9be	Added support for the nibble zero connect	8 months ago
taco	5d0ff7fe6e	remove guard on MyMesh::setRxBoostedGain()	1 month ago
liamcottle	b975180fc8	initial support for elecrow thinknode m7	1 month ago
UltimateCodeWarrior	b8b6598dd3	Fix blank OLED on T-Beam Supreme V3 (I2C bus + 0x3D address) The SH1106 OLED on the LilyGo T-Beam Supreme V3 never lights up because: 1. The primary I2C bus (Wire) that the OLED, BME280 and magnetometer share is never initialized. The PMU/RTC use Wire1 (via XPowersLib); nothing brings up Wire on PIN_BOARD_SDA/PIN_BOARD_SCL, so the display driver talks on the wrong default pins. 2. The OLED is at I2C address 0x3D on this board (0x3C is taken by the QMC6310 magnetometer), but SH1106Display::begin() only tried 0x3C. Initialize Wire for TBEAM_SUPREME_SX1262, and have SH1106Display::begin() prefer 0x3D (only ever used by the OLED) before falling back to 0x3C. Backwards-compatible for boards with the OLED at 0x3C. Closes #2609	1 month ago
ripplebiz	3192684582	Merge pull request #2752 from Quency-D/heltec-tower-v2 Add Heltec tower v2	1 month ago
ripplebiz	aa1cb1f663	Merge pull request #2765 from fizzyfuzzle/ESP32-Reset-Reason Add ESP32 Reset Reason to existing pwrmgt.bootreason cli command	1 month ago
ripplebiz	6a63dfce1c	Merge pull request #2771 from oltaco/nrf52-framework-buildfix Point Heltec Mesh Solar and Mesh Pocket at our NRF52 framework fork	1 month ago
Liam Cottle	c2cfba4af3	Merge pull request #2810 from IoTThinks/MCDev-Fixed-GPS-Time-for-T114-202606 Fixed GPS time sync for Heltec T114	1 month ago

... 2 3 4 5 6 ...

3250 Commits (dev) All Branches Search

3250 Commits (dev)

All Branches