MeshCore

Commit Graph

Author	SHA1	Message	Date
Scott Powell	0a8a0a4904	* Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power()	2 months ago
Rastislav Vysoky	5beef490a0	add kiss radio env to most of the variants	2 months ago
Rastislav Vysoky	66009069cd	standardize the minewsemi variant	2 months ago
Wessel Nieboer	0a13ac7fc7	Default button polarity to active-LOW across all firmware types Nearly all LoRa boards use a boot button that pulls to ground when pressed.	4 months ago
overkillfpv	f0ec5d2ae7	changed to set the preamble on radio settings change	3 months ago
Wessel Nieboer	d0720c63c2	Allow negative tx power Like SX1262 allows -9 dBm lowest, some allow lower but that probably isn't useful	5 months ago
Frieder Schrempf	4f46ec75dd	Remove NRF52BoardOTA class and integrate it into NRF52Board As all NRF52 boards now have OTA support, let's remove the subclass and integrate it into the base class. Signed-off-by: Frieder Schrempf <[email protected]>	6 months ago
Frieder Schrempf	137eed3ede	variants: Minewsemi ME25LS01: Use DC/DC regulator The schematic shows the LC circuit for the internal DC/DC regulator to be available. Enable it to save power. Signed-off-by: Frieder Schrempf <[email protected]>	6 months ago
Frieder Schrempf	b024b9e1a1	Deduplicate NRF52 startOTAUpdate() The startOTAUpdate() is the same for all NRF52 boards. Use a common implementation for all boards that currently have a specific implementation. The following boards currently have an empty startOTAUpdate() for whatever reasons and therefore are not inheriting NRF52BoardOTA to keep the same state: Nano G2 Ultra, Seeed SenseCAP T1000-E, Wio WM1110. Signed-off-by: Frieder Schrempf <[email protected]>	6 months ago
Frieder Schrempf	93d1560d14	Use common NRF52 begin() and deduplicate() startup reason init Use a common begin() method that can be called from derived classes to contain the shared initialization code. Signed-off-by: Frieder Schrempf <[email protected]>	6 months ago
Frieder Schrempf	87b0e432bb	Deduplicate reboot() for NRF52 boards The reboot() method is the same for all NRF52 boards. Use a shared implementation. Signed-off-by: Frieder Schrempf <[email protected]>	6 months ago
Kevin Le	4504ad4daf	Added default temperature from ESP32 MCU and NRF52 MCU Added NRF52Board.h and NRF52Board.cpp Modified NRF52 variants to extend from NRF52Board to share common feature	6 months ago
taco	dde9b7cc76	remove calls to sd_power_mode_set(NRF_POWER_MODE_LOWPWR); this is the default mode, there is no need to call it unless previously changing it.	6 months ago
liamcottle	0307b6119e	increase MAX_NEIGHBOURS from 8 to 50	9 months ago
taco	e8314c9c8c	new ldscript for extrafs nrf companion envs	9 months ago
taco	accd1e0a97	nrf52 targets: increase limits for contacts and channels	10 months ago
Scott Powell	f5ad1df103	* Minewsemi: ui-orig	10 months ago
recrof	6be8e19a9f	move radiolib wrappers to dedicated directory	11 months ago
Normunds Gavars	ed7ca6fb60	393 clean up Minewsemi ME25LS01 variant	11 months ago
Normunds Gavars	aa3c702ffd	Read battery voltage on Minewsemi ME25LS01	12 months ago
Normunds Gavars	6440bcaf48	Clean up pins in variant.h	12 months ago
Normunds Gavars	af2628bb00	Use EnvironmentSensorManager in Minewsemi variant	12 months ago
Normunds Gavars	6f94c8148a	Add Minewsemi ME25LS01 variant	12 months ago

26 Commits (dev)