MeshCore

Commit Graph

Author	SHA1	Message	Date
AtlavoxDev	e5dab6b999	Rename bootComplete() to onBootComplete() for naming consistency Matches the existing event-style lifecycle hooks on MainBoard (onBeforeTransmit, onAfterTransmit) per @liamcottle's review feedback.	2 months ago
AtlavoxDev	39a69b86c3	Add MainBoard::bootComplete() hook for boot-indicator LED feedback Framework for upcoming variant-specific PRs that add LED feedback during boot. The hook gives users visual cues that the device is busy and shouldn't be interacted with until startup completes.	2 months ago
Kevin Le	6b1099161c	Added Power Saving for NRF52 companions	3 months ago
Rococo88	a0cc3bab4b	Refactor WiFi auto-reconnect to use non-blocking polling	3 months ago
Scott Powell	0a8a0a4904	* Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power()	3 months ago
Ryan Gregg	a3354db521	Address PR review feedback from oltaco - Remove extra blank line in companion_radio main.cpp before NRF52/STM32 block - Revert unintended STM32_PLATFORM ETHERNET_ENABLED branch (no STM32 ethernet target exists, and it incorrectly included nrf52 headers) - Drop renovate annotations from rak4631 platformio.ini (no renovate config in this repo)	3 months ago
Alejandro Ramirez	f8dbdce6bb	fix: apply persisted GPS enabled setting on boot for companion radio The companion_radio example was not restoring the GPS enabled/disabled preference from flash after reboot. The preference was being saved correctly when toggled via the mobile app, but on boot, sensors.begin() -> initBasicGPS() unconditionally sets gps_active=false and nothing subsequently restored the persisted state. Added applyGpsPrefs() (matching the pattern in simple_repeater, simple_sensor, and simple_room_server) and call it from main.cpp after sensors.begin() to ensure the GPS hardware is initialized before the saved preference is applied.	4 months ago
Ryan Gregg	88892de864	Fix Ethernet init checking hardwareStatus before begin() and deduplicate CLI code The Ethernet retry loop in repeater and room server checked hardwareStatus() and linkStatus() before calling Ethernet.begin(), which always returned EthernetNoHardware since hardware detection only happens during begin(). Extract shared Ethernet CLI code into EthernetCLI.h to prevent future divergence. Also fix time_t type mismatch in companion radio Ethernet init. Co-Authored-By: Claude Opus 4.6 <[email protected]>	4 months ago
Ryan Gregg	61ba79966b	Address PR review feedback from liamcottle (second round) - Rename eth command to eth.status for consistency with other commands - Rename generateDeviceMac to generateEthernetMac for clarity - Refactor ethernet_handle_command to return false by default - Allow new TCP clients to replace existing connections (repeater, room server, SerialEthernetInterface) - Boot companion radio without Ethernet on init failure (LoRa-only recovery mode) - Remove > prompt from ethernet CLI for consistency with serial interface - Fix variable redeclaration compile error in SerialEthernetInterface when ETHERNET_STATIC_IP is defined - Fix TCP socket leak when duplicate client detection fires - Remove dead recv_queue and adv_restart_time members from SerialEthernetInterface - Fix port numbers in docs (port 23 for repeater/room server CLI, port 5000 for companion radio) - Clarify eth.status command is only available in repeater and room server firmware Co-Authored-By: Claude Sonnet 4.6 <[email protected]>	4 months ago
Ryan Gregg	3e9ceba24a	Updates based on PR review feedback from liamcottle	4 months ago
Ryan Gregg	aea64e1f19	Address PR review feedback for Ethernet support - Add #pragma once to SerialEthernetInterface.h - Rename TCP_PORT to ETH_TCP_PORT with #ifndef guard - Fix typos: "initalizing" → "initializing" - Fix #elif without condition → #else for STM32 block - Replace infinite loop on ETH init failure with halt() - Remove heartbeat Serial.print(".") output - Remove dead beginETH() call (ETH_ENABLED, not RAK_ETH_ENABLE) - Comment out MESH_DEBUG and ETH_DEBUG_LOGGING build flags Co-Authored-By: Claude Opus 4.6 <[email protected]>	4 months ago
Ryan Gregg	70b51bd096	Add native Ethernet support for RAK4631 repeater, room server, and companion Add W5100S Ethernet adapter support for RAK4631-based firmware, enabling TCP CLI access on port 23 as an alternative to BLE/Serial connections. - New SerialEthernetInterface for nRF52 with DHCP, reconnection handling, and shared WB_IO2 power pin management with GPS module - Ethernet build targets for repeater, room server, and companion firmware - Prevent GPS from toggling WB_IO2 when Ethernet module is active - CI build check for all three ETH firmware targets Co-Authored-By: Claude Opus 4.6 <[email protected]>	4 months ago
Wessel Nieboer	1ab8a6f6da	Address review comments	5 months ago
taco	c7eea3915d	fix: remove esp_wifi.h from esp32board.h saves ~500 bytes of dram and allows Tbeam to compile again	6 months ago
Scott Powell	3c27132914	* T1000e BLE - default node name is now the MAC address	6 months ago
Quency-D	c89a0e9929	Add an external watchdog module	6 months ago
csrutil	39503ad0b4	move GPS preference initialization to UITask	8 months ago
csrutil	4aebc57add	fixed gps init value	8 months ago
Scott Powell	3d9378d91e	* Fix for VolatileRTCClock wrapping around to initial synced time every 49 days	9 months ago
taco	accd1e0a97	nrf52 targets: increase limits for contacts and channels	11 months ago
taco	2b24c575c7	support dual filsystems on nrf52 store identity and prefs in UserData and contacts, channels and adv_blobs in ExtraData	11 months ago
taco	bdfe9ad27b	switch to using QSPI bus for external flash	12 months ago
taco	c5180d4588	initial commit: CustomLFS	12 months ago
Scott Powell	acde9921b5	* Refactor of UITask, moved to /ui-new	11 months ago
Scott Powell	4b95c981bb	* UI revamp for companion radios	12 months ago
Scott Powell	1295c4633b	* companion: minor refactor of who should invoke UITask::loop()	1 year ago
Florent de Lamotte	588a986976	t1000e: gps toggle not using board class	1 year ago
Scott Powell	9c833486bf	* DataStore, advert blob record format change	1 year ago
Scott Powell	6e0b505a2a	* companion: refactor of all filesystem access to new DataStore module	1 year ago
Scott Powell	5729d66a9e	* companion: some further refactors after the MyMesh refactor	1 year ago
Florent	31cbf9ed0e	gps : sync time on fix	1 year ago
Scott Powell	a987efeca1	* companion: disabling interference threshold for now	1 year ago
JQ	ecd2b0be89	fixing channel name display	1 year ago
hank	f58a34f5f4	Refactored MyMesh, advert on doublepress Pulled the class out of main.cpp, made a header to go along with it, externed globals in headers to make them accessible to button code. Added button code to send an advert on double press. Refactored ini files to prevent linker errors.	1 year ago
Florent	08aad7338b	gps : sync time on fix	1 year ago
Scott Powell	fec064c1a2	* companion: interference threshold default (14)	1 year ago
Scott Powell	b3fc6bedf9	* companion: saveContacts() now deferred for 5 secs (lazy writes)	1 year ago
Scott Powell	0e90b73110	* companion: PUSH_CODE_LOGIN_SUCCESS frame, now includes server clock timestamp	1 year ago
Scott Powell	0bad7ee106	* ver bump to 1.6.2	1 year ago
Scott Powell	02b6f4a285	* Companion: telemetry_mode_env added to prefs	1 year ago
liamcottle	d9c1cffac2	allow setting default node name for companion via build flag	1 year ago
seagull9000	7507f889a5	fix location and naming of enum	1 year ago
seagull9000	f82844f43f	RTTTL on message types	1 year ago
Scott Powell	56b84408e4	* workaround for nRF + LittleFS glitch with seek/truncate	1 year ago
Scott Powell	7e90d386e2	* refactored buzzer concept to UITask * moved buzzer.h/cpp to helpers/ui	1 year ago
seagull9000	be88bea42d	initial support for generic RTTTL notifier	1 year ago
Scott Powell	a73eb9823d	* big refactor of the 'display' object. Now defined in variants/*/target modules.	1 year ago
Scott Powell	65d398fcbc	* ver bump to v1.6.1	1 year ago
Rob Loranger	25b534a29d	add support for SH1106 OLED display	1 year ago
Florent	35e1901d0e	wio-e5 : initial port	1 year ago

1 2 3 4 5

214 Commits (config-serializer)