display is working now

src/helpers/ui/SH1107Display.cpp

@@ -2,6 +2,10 @@
 #include <Adafruit_GrayOLED.h>
 #include "Adafruit_SH110X.h"
 
+#ifndef DISPLAY_ROTATION
+#define DISPLAY_ROTATION 0
+#endif
+
 bool SH1107Display::i2c_probe(TwoWire &wire, uint8_t addr)
 {
   wire.beginTransmission(addr);
@@ -11,7 +15,11 @@ bool SH1107Display::i2c_probe(TwoWire &wire, uint8_t addr)
 
 bool SH1107Display::begin()
 {
-  return display.begin(DISPLAY_ADDRESS, true) && i2c_probe(Wire, DISPLAY_ADDRESS);
+  bool result = display.begin(DISPLAY_ADDRESS, true) && i2c_probe(Wire, DISPLAY_ADDRESS);
+  if (result) {
+    display.setRotation(DISPLAY_ROTATION);
+  }
+  return result;
 }
 
 void SH1107Display::turnOn()
@@ -35,6 +43,8 @@ void SH1107Display::clear()
 void SH1107Display::startFrame(Color bkg)
 {
   display.clearDisplay(); // TODO: apply 'bkg'
+  display.setContrast(300); // 0-255. default setting was causing some flickering. 
+  // display.SH110X_SETPRECHARGE(255);
   _color = SH110X_WHITE;
   display.setTextColor(_color);
   display.setTextSize(1);

src/helpers/ui/SH1107Display.h

@@ -11,14 +11,15 @@
 #ifndef PIN_OLED_12V_EN 
 #define PIN_OLED_12V_EN -1
 #endif
+#endif
 
 #ifndef DISPLAY_ADDRESS
-#define DISPLAY_ADDRESS 0x3D
+#define DISPLAY_ADDRESS 0x3c
 #endif
 
 class SH1107Display : public DisplayDriver
 {
-  Adafruit_SH1107G display;
+  Adafruit_SH1107 display;
   bool _isOn;
   uint8_t _color;
 

variants/muzi_base_duo/muzi_base_duoBoard.cpp

@@ -23,18 +23,28 @@ void muzi_base_duoBoard::initiateShutdown(uint8_t reason) {
 
 void muzi_base_duoBoard::begin() {
   NRF52BoardDCDC::begin();
-
   pinMode(PIN_VBAT_READ, INPUT);
+  pinMode(SCREEN_12V_ENABLE, OUTPUT);
+  digitalWrite(SCREEN_12V_ENABLE, HIGH); // Enable 12V power for SH1107 display
+  delay(250);
+  Wire.begin(); 
+  // delay(1000); // wait for display to initialize. otherwise it doesn't come up on boot.
 
 #ifdef PIN_USER_BTN
   pinMode(PIN_USER_BTN, INPUT_PULLUP);
 #endif
-
-#if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL)
-  Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL);
-#endif
+  pinMode(PIN_BUTTON1, INPUT_PULLUP);
+  pinMode(PIN_BUTTON2, INPUT_PULLUP);
+  pinMode(PIN_BUTTON3, INPUT_PULLUP);
+  pinMode(PIN_BUTTON4, INPUT_PULLUP);
+  pinMode(PIN_BUTTON5, INPUT_PULLUP);
+  pinMode(PIN_BUTTON6, INPUT_PULLUP);
+
+// #if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL)
+//   Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL);
+// #endif
 #ifdef NRF52_POWER_MANAGEMENT
   checkBootVoltage(&power_config);
 #endif
-  delay(10);   // give sx1262 some time to power up
+  // delay(10);   // give LR1121 some time to power up
 }

variants/muzi_base_duo/platformio.ini

@@ -117,3 +117,41 @@ lib_deps = ${muzi_base_duo.lib_deps}
   densaugeo/base64 @ ~1.4.0
   ; stevemarple/MicroNMEA @ ^2.0.6
   end2endzone/NonBlockingRTTTL@^1.3.0
+[env:muzi_base_duo_companion_radio_ble_superIO]
+extends = muzi_base_duo
+board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
+board_upload.maximum_size = 708608
+build_flags = ${muzi_base_duo.build_flags}
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D BLE_PIN_CODE=123456
+  -D BLE_TX_POWER=0
+  -D QSPIFLASH=1
+  -D UI_HAS_JOYSTICK=1
+;  -D BLE_DEBUG_LOGGING=1
+;  -D MESH_PACKET_LOGGING=1
+  ; -D MESH_DEBUG=1
+  -D OFFLINE_QUEUE_SIZE=256
+  -D DISPLAY_CLASS=SH1107Display
+  -D DISPLAY_ROTATION=2
+  ; -D ADVERT_NAME='"@@MAC"'
+  -D ENV_INCLUDE_GPS=1
+  ; -D PIN_BUZZER=22
+build_src_filter = ${muzi_base_duo.build_src_filter}
+  +<helpers/nrf52/SerialBLEInterface.cpp>
+  +<helpers/sensors>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+  +<helpers/ui/SH1107Display.cpp>
+  +<helpers/ui/buzzer.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+  
+lib_deps = ${muzi_base_duo.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+  stevemarple/MicroNMEA @ ^2.0.6
+  end2endzone/NonBlockingRTTTL@^1.3.0
+  adafruit/Adafruit SH110X@^2.1.14
+  artronshop/[email protected]
+  adafruit/Adafruit GFX Library @ ^1.12.1
+

variants/muzi_base_duo/target.cpp

@@ -1,7 +1,6 @@
 #include <Arduino.h>
 #include "target.h"
 #include "variant.h"
-// #include <helpers/sensors/MicroNMEALocationProvider.h>
 
 muzi_base_duoBoard board;
 
@@ -9,12 +8,22 @@ RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BU
 
 WRAPPER_CLASS radio_driver(radio, board);
 
-VolatileRTCClock rtc_clock;
-// MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
+VolatileRTCClock fallback_clock;
+AutoDiscoverRTCClock rtc_clock(fallback_clock);
+#if ENV_INCLUDE_GPS
+  #include <helpers/sensors/MicroNMEALocationProvider.h>
+  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
+  EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
+#else
+  EnvironmentSensorManager sensors;
+#endif
 
-EnvironmentSensorManager sensors;  // only enable environment sensors. GPS is disabled. 
 #ifdef DISPLAY_CLASS
-  NullDisplayDriver display;
+  DISPLAY_CLASS display;
+  MomentaryButton user_btn(PIN_USER_BTN, 1000, true, false, false);
+  MomentaryButton joystick_left(JOYSTICK_LEFT, 1000, true, false, false);
+  MomentaryButton joystick_right(JOYSTICK_RIGHT, 1000, true, false, false);
+  MomentaryButton back_btn(PIN_BACK_BTN, 1000, true, false, true);
 #endif
 
 #ifndef LORA_CR

variants/muzi_base_duo/target.h

@@ -8,19 +8,24 @@
 #include <helpers/ArduinoHelpers.h>
 #include <helpers/SensorManager.h>
 #include <helpers/sensors/LocationProvider.h>
+#include <helpers/AutoDiscoverRTCClock.h>
 #include <helpers/sensors/EnvironmentSensorManager.h>  // Added: Include for EnvironmentSensorManager
-#ifdef DISPLAY_CLASS
-  #include "NullDisplayDriver.h"
-#endif
-
 
 #ifdef DISPLAY_CLASS
-  extern NullDisplayDriver display;
+  #include <helpers/ui/SH1107Display.h>
+  extern DISPLAY_CLASS display;
+  #include <helpers/ui/MomentaryButton.h>
+  extern MomentaryButton user_btn;
+  extern MomentaryButton joystick_left;
+  extern MomentaryButton joystick_right;
+  extern MomentaryButton joystick_up;
+  extern MomentaryButton joystick_down;
+  extern MomentaryButton back_btn;
 #endif
 
 extern muzi_base_duoBoard board;
 extern WRAPPER_CLASS radio_driver;
-extern VolatileRTCClock rtc_clock;
+extern AutoDiscoverRTCClock rtc_clock;
 extern EnvironmentSensorManager sensors;
 
 bool radio_init();

variants/muzi_base_duo/variant.cpp

@@ -81,9 +81,9 @@ void initVariant()
   digitalWrite(LED_BLUE, LOW);
   pinMode(BUZZER_PIN, OUTPUT);
   digitalWrite(BUZZER_PIN, LOW); // turn off buzzer at start. don't leave it high.
-  pinMode(GPS_EN, OUTPUT);
-  digitalWrite(GPS_EN, LOW); // lets turn off the GPS at start. we can turn it on when we need it.
+  pinMode(GPS_EN_GPIO, OUTPUT);
+  digitalWrite(GPS_EN_GPIO, HIGH); // needs to turn on for GPS detection
 
   pinMode(SCREEN_12V_ENABLE, OUTPUT);
-  digitalWrite(SCREEN_12V_ENABLE, LOW); //
-}
+  digitalWrite(SCREEN_12V_ENABLE, LOW); // disable 12V power for SH1107 display for now. 
+}

variants/muzi_base_duo/variant.h

@@ -67,6 +67,7 @@ static const uint8_t AREF = (PIN_AREF); // not used
 #define PIN_WIRE1_SCL            (6)             // P0.6
 #define PIN_WIRE_SDA           (24)             // P0.24 OLED I2C
 #define PIN_WIRE_SCL           (25)             // P0.25 OLED I2C
+#define I2C_NO_RESCAN
 // #define I2C_NO_RESCAN
 // #define HAS_QMA6100P
 // #define QMA_6100P_INT_PIN       (34)             // P1.2
@@ -134,10 +135,10 @@ static const uint8_t AREF = (PIN_AREF); // not used
 
 ////////////////////////////////////////////////////////////////////////////////
 // GPS
-// #define HAS_GPS                 1
-#define GPS_RX_PIN              PIN_SERIAL1_RX
-#define GPS_TX_PIN              PIN_SERIAL1_TX
-#define GPS_EN                  (32+1)            // P1.01 PWR_IO2 on schematic. just cuts power to gps. 
+#define HAS_GPS                 1
+#define PIN_GPS_RX              PIN_SERIAL1_RX
+#define PIN_GPS_TX              PIN_SERIAL1_TX
+#define GPS_EN_GPIO                  (32+1)            // P1.01 PWR_IO2 on schematic. just cuts power to gps. 
 
 ////////////////////////////////////////////////////////////////////////////////
 // Buzzer