* new NodePrefs for companion

examples/companion_radio/DataStore.cpp

@@ -189,17 +189,22 @@ bool DataStore::saveMainIdentity(const mesh::LocalIdentity &identity) {
   return identity_store.save("_main", identity);
 }
 
-void DataStore::loadPrefs(NodePrefs& prefs, double& node_lat, double& node_lon) {
-  if (_fs->exists("/new_prefs")) {
-    loadPrefsInt("/new_prefs", prefs, node_lat, node_lon); // new filename
-  } else if (_fs->exists("/node_prefs")) {
-    loadPrefsInt("/node_prefs", prefs, node_lat, node_lon);
-    savePrefs(prefs, node_lat, node_lon);                // save to new filename
-    _fs->remove("/node_prefs"); // remove old
+void DataStore::loadPrefs(NodePrefs& prefs) {
+  if (_fs->exists("/prefs.json")) {
+    File file = openRead(_fs, "/prefs.json");
+    if (file) {
+      prefs.loadSerial(file);   // new Serial prefs
+      file.close();
+    }
+  } else if (_fs->exists("/new_prefs")) {
+    loadPrefsInt("/new_prefs", prefs);
+    if (savePrefs(prefs) ) {                // save to new format
+      //_fs->remove("/new_prefs"); // remove old
+    }
   }
 }
 
-void DataStore::loadPrefsInt(const char *filename, NodePrefs& _prefs, double& node_lat, double& node_lon) {
+void DataStore::loadPrefsInt(const char *filename, NodePrefs& _prefs) {
   File file = openRead(_fs, filename);
   if (file) {
     uint8_t pad[8];
@@ -207,12 +212,12 @@ void DataStore::loadPrefsInt(const char *filename, NodePrefs& _prefs, double& no
     file.read((uint8_t *)&_prefs.airtime_factor, sizeof(float));                           // 0
     file.read((uint8_t *)_prefs.node_name, sizeof(_prefs.node_name));                      // 4
     file.read(pad, 4);                                                                     // 36
-    file.read((uint8_t *)&node_lat, sizeof(node_lat));                                     // 40
-    file.read((uint8_t *)&node_lon, sizeof(node_lon));                                     // 48
+    file.read((uint8_t *)&_prefs.node_lat, sizeof(_prefs.node_lat));                       // 40
+    file.read((uint8_t *)&_prefs.node_lon, sizeof(_prefs.node_lon));                       // 48
     file.read((uint8_t *)&_prefs.freq, sizeof(_prefs.freq));                               // 56
     file.read((uint8_t *)&_prefs.sf, sizeof(_prefs.sf));                                   // 60
     file.read((uint8_t *)&_prefs.cr, sizeof(_prefs.cr));                                   // 61
-    file.read((uint8_t *)&_prefs.client_repeat, sizeof(_prefs.client_repeat));             // 62
+    file.read((uint8_t *)&_prefs._client_repeat, sizeof(_prefs._client_repeat));             // 62
     file.read((uint8_t *)&_prefs.manual_add_contacts, sizeof(_prefs.manual_add_contacts)); // 63
     file.read((uint8_t *)&_prefs.bw, sizeof(_prefs.bw));                                   // 64
     file.read((uint8_t *)&_prefs.tx_power_dbm, sizeof(_prefs.tx_power_dbm));               // 68
@@ -234,48 +239,21 @@ void DataStore::loadPrefsInt(const char *filename, NodePrefs& _prefs, double& no
     file.read((uint8_t *)_prefs.default_scope_name, sizeof(_prefs.default_scope_name));    // 90
     file.read((uint8_t *)_prefs.default_scope_key, sizeof(_prefs.default_scope_key));     // 121
 
+    // migrate old fields
+    _prefs.setRepeatEn(_prefs._client_repeat != 0);
+
     file.close();
   }
 }
 
-void DataStore::savePrefs(const NodePrefs& _prefs, double node_lat, double node_lon) {
-  File file = openWrite(_fs, "/new_prefs");
+bool DataStore::savePrefs(NodePrefs& _prefs) {
+  File file = openWrite(_fs, "/prefs.json");
   if (file) {
-    uint8_t pad[8];
-    memset(pad, 0, sizeof(pad));
-
-    file.write((uint8_t *)&_prefs.airtime_factor, sizeof(float));                           // 0
-    file.write((uint8_t *)_prefs.node_name, sizeof(_prefs.node_name));                      // 4
-    file.write(pad, 4);                                                                     // 36
-    file.write((uint8_t *)&node_lat, sizeof(node_lat));                                     // 40
-    file.write((uint8_t *)&node_lon, sizeof(node_lon));                                     // 48
-    file.write((uint8_t *)&_prefs.freq, sizeof(_prefs.freq));                               // 56
-    file.write((uint8_t *)&_prefs.sf, sizeof(_prefs.sf));                                   // 60
-    file.write((uint8_t *)&_prefs.cr, sizeof(_prefs.cr));                                   // 61
-    file.write((uint8_t *)&_prefs.client_repeat, sizeof(_prefs.client_repeat));             // 62
-    file.write((uint8_t *)&_prefs.manual_add_contacts, sizeof(_prefs.manual_add_contacts)); // 63
-    file.write((uint8_t *)&_prefs.bw, sizeof(_prefs.bw));                                   // 64
-    file.write((uint8_t *)&_prefs.tx_power_dbm, sizeof(_prefs.tx_power_dbm));               // 68
-    file.write((uint8_t *)&_prefs.telemetry_mode_base, sizeof(_prefs.telemetry_mode_base)); // 69
-    file.write((uint8_t *)&_prefs.telemetry_mode_loc, sizeof(_prefs.telemetry_mode_loc));   // 70
-    file.write((uint8_t *)&_prefs.telemetry_mode_env, sizeof(_prefs.telemetry_mode_env));   // 71
-    file.write((uint8_t *)&_prefs.rx_delay_base, sizeof(_prefs.rx_delay_base));             // 72
-    file.write((uint8_t *)&_prefs.advert_loc_policy, sizeof(_prefs.advert_loc_policy));     // 76
-    file.write((uint8_t *)&_prefs.multi_acks, sizeof(_prefs.multi_acks));                   // 77
-    file.write((uint8_t *)&_prefs.path_hash_mode, sizeof(_prefs.path_hash_mode));           // 78
-    file.write(pad, 1);                                                                     // 79
-    file.write((uint8_t *)&_prefs.ble_pin, sizeof(_prefs.ble_pin));                         // 80
-    file.write((uint8_t *)&_prefs.buzzer_quiet, sizeof(_prefs.buzzer_quiet));               // 84
-    file.write((uint8_t *)&_prefs.gps_enabled, sizeof(_prefs.gps_enabled));                 // 85
-    file.write((uint8_t *)&_prefs.gps_interval, sizeof(_prefs.gps_interval));               // 86
-    file.write((uint8_t *)&_prefs.autoadd_config, sizeof(_prefs.autoadd_config));           // 87
-    file.write((uint8_t *)&_prefs.autoadd_max_hops, sizeof(_prefs.autoadd_max_hops));       // 88
-    file.write((uint8_t *)&_prefs.rx_boosted_gain, sizeof(_prefs.rx_boosted_gain));         // 89
-    file.write((uint8_t *)_prefs.default_scope_name, sizeof(_prefs.default_scope_name));    // 90
-    file.write((uint8_t *)_prefs.default_scope_key, sizeof(_prefs.default_scope_key));     // 121
-
+    bool success = _prefs.saveSerial(file);
     file.close();
+    return success;
   }
+  return false;
 }
 
 void DataStore::loadContacts(DataStoreHost* host) {

examples/companion_radio/DataStore.h

@@ -19,7 +19,7 @@ class DataStore {
   mesh::RTCClock* _clock;
   IdentityStore identity_store;
 
-  void loadPrefsInt(const char *filename, NodePrefs& prefs, double& node_lat, double& node_lon);
+  void loadPrefsInt(const char *filename, NodePrefs& prefs);
 #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
   void checkAdvBlobFile();
 #endif
@@ -33,8 +33,8 @@ public:
   FILESYSTEM* getSecondaryFS() const { return _fsExtra; }
   bool loadMainIdentity(mesh::LocalIdentity &identity);
   bool saveMainIdentity(const mesh::LocalIdentity &identity);
-  void loadPrefs(NodePrefs& prefs, double& node_lat, double& node_lon);
-  void savePrefs(const NodePrefs& prefs, double node_lat, double node_lon);
+  void loadPrefs(NodePrefs& prefs);
+  bool savePrefs(NodePrefs& prefs);
   void loadContacts(DataStoreHost* host);
   void saveContacts(DataStoreHost* host, bool (*filter)(const ContactInfo& c) = NULL);
   void loadChannels(DataStoreHost* host);

examples/companion_radio/MyMesh.cpp

@@ -483,7 +483,7 @@ bool MyMesh::filterRecvFloodPacket(mesh::Packet* packet) {
 }
 
 bool MyMesh::allowPacketForward(const mesh::Packet* packet) {
-  return _prefs.client_repeat != 0;
+  return _prefs.isRepeatEn();
 }
 
 void MyMesh::sendFloodScoped(const TransportKey& scope, mesh::Packet* pkt, uint32_t delay_millis) {
@@ -876,7 +876,7 @@ MyMesh::MyMesh(mesh::Radio &radio, mesh::RNG &rng, mesh::RTCClock &rtc, SimpleMe
   send_unscoped = false;
 
   // defaults
-  memset(&_prefs, 0, sizeof(_prefs));
+  //memset(&_prefs, 0, sizeof(_prefs));
   _prefs.airtime_factor = 1.0;
   strcpy(_prefs.node_name, "NONAME");
   _prefs.freq = LORA_FREQ;
@@ -887,6 +887,7 @@ MyMesh::MyMesh(mesh::Radio &radio, mesh::RNG &rng, mesh::RTCClock &rtc, SimpleMe
   _prefs.gps_enabled = 0;       // GPS disabled by default
   _prefs.gps_interval = 0;      // No automatic GPS updates by default
   //_prefs.rx_delay_base = 10.0f;  enable once new algo fixed
+  _prefs.setRepeatEn(false);
 #if defined(USE_SX1262) || defined(USE_SX1268)
 #ifdef SX126X_RX_BOOSTED_GAIN
   _prefs.rx_boosted_gain = SX126X_RX_BOOSTED_GAIN;
@@ -931,7 +932,9 @@ void MyMesh::begin(bool has_display) {
 #endif
 
   // load persisted prefs
-  _store->loadPrefs(_prefs, sensors.node_lat, sensors.node_lon);
+  _store->loadPrefs(_prefs);
+  sensors.node_lat = _prefs.node_lat;
+  sensors.node_lon = _prefs.node_lon;
 
   // sanitise bad pref values
   _prefs.rx_delay_base = constrain(_prefs.rx_delay_base, 0, 20.0f);
@@ -1031,7 +1034,7 @@ void MyMesh::handleCmdFrame(size_t len) {
     i += 40;
     StrHelper::strzcpy((char *)&out_frame[i], FIRMWARE_VERSION, 20);
     i += 20;
-    out_frame[i++] = _prefs.client_repeat;   // v9+
+    out_frame[i++] = _prefs.isRepeatEn() ? 1 : 0;   // v9+
     out_frame[i++] = _prefs.path_hash_mode;  // v10+
     _serial->writeFrame(out_frame, i);
   } else if (cmd_frame[0] == CMD_APP_START &&
@@ -1393,7 +1396,7 @@ void MyMesh::handleCmdFrame(size_t len) {
       _prefs.cr = cr;
       _prefs.freq = (float)freq / 1000.0;
       _prefs.bw = (float)bw / 1000.0;
-      _prefs.client_repeat = repeat;
+      _prefs.setRepeatEn(repeat != 0);
       savePrefs();
 
       radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);

examples/companion_radio/MyMesh.h

@@ -165,7 +165,11 @@ protected:
   }
 
 public:
-  void savePrefs() { _store->savePrefs(_prefs, sensors.node_lat, sensors.node_lon); }
+  void savePrefs() {
+    _prefs.node_lat = sensors.node_lat;
+    _prefs.node_lon = sensors.node_lon;
+    _store->savePrefs(_prefs);
+  }
 
 #if ENV_INCLUDE_GPS == 1
   void applyGpsPrefs() {

examples/companion_radio/NodePrefs.h

@@ -1,5 +1,6 @@
 #pragma once
 #include <cstdint> // For uint8_t, uint32_t
+#include <helpers/ConfigSerializer.h>
 
 #define TELEM_MODE_DENY            0
 #define TELEM_MODE_ALLOW_FLAGS     1     // use contact.flags
@@ -8,9 +9,11 @@
 #define ADVERT_LOC_NONE       0
 #define ADVERT_LOC_SHARE      1
 
-struct NodePrefs {  // persisted to file
+class NodePrefs : public ConfigSerializer {  // persisted to file
+public:
   float airtime_factor;
   char node_name[32];
+  double node_lat, node_lon;
   float freq;
   uint8_t sf;
   uint8_t cr;
@@ -29,9 +32,101 @@ struct NodePrefs {  // persisted to file
   uint32_t gps_interval;     // GPS read interval in seconds
   uint8_t autoadd_config;    // bitmask for auto-add contacts config
   uint8_t rx_boosted_gain; // SX126x RX boosted gain mode (0=power saving, 1=boosted)
-  uint8_t client_repeat;
+  uint8_t _client_repeat;  // DEPRECATED -> use repeat.disable_fwd
   uint8_t path_hash_mode;    // which path mode to use when sending
   uint8_t autoadd_max_hops;  // 0 = no limit, 1 = direct (0 hops), N = up to N-1 hops (max 64)
   char default_scope_name[31];
   uint8_t default_scope_key[16];
+
+private:
+  class RadioPrefs : public ConfigSerializer {  // COPIED from CommonCLI (for now)
+    NodePrefs* _parent;
+  protected:
+    void structure() override {
+      def("freq", _parent->freq);
+      def("bw", _parent->bw);
+      def("sf", _parent->sf);
+      def("cr", _parent->cr);
+      //def("cad", _parent->cad_enabled);
+      //def("int_thr", _parent->interference_threshold);
+      def("rxgain", _parent->rx_boosted_gain);
+      def("fem_rxgain", _parent->rx_boosted_gain);
+      def("tx", _parent->tx_power_dbm);
+      def("af", _parent->airtime_factor);
+      def("rxdelay", _parent->rx_delay_base);
+      //def("f_txdelay", _parent->tx_delay_factor);   currently hard-coded
+      //def("d_txdelay", _parent->direct_tx_delay_factor);  currently hard-coded
+      //def("agc_int", _parent->agc_reset_interval);
+      def("hash_mode", _parent->path_hash_mode);
+      def("multi_ack", _parent->multi_acks);
+    }
+  public:
+    RadioPrefs(NodePrefs* parent) : _parent(parent) { }
+  };
+  RadioPrefs radio;
+
+  class GPSPrefs : public ConfigSerializer {  // COPIED from CommionCLI (for now)
+    NodePrefs* _parent;
+  protected:
+    void structure() override {
+      def("en", _parent->gps_enabled); // boolean
+      def("int", _parent->gps_interval);   // interval in seconds
+      def("adv_loc", _parent->advert_loc_policy);
+    }
+  public:
+    GPSPrefs(NodePrefs* parent) : _parent(parent) { }
+  };
+  GPSPrefs gps;
+
+  class RepeatPrefs : public ConfigSerializer {  // COPIED from CommionCLI (for now)
+  public:
+    uint8_t disable_fwd = 1;
+  protected:
+    void structure() override {
+      def("disable", disable_fwd);
+      //def("f_max", flood_max);
+      //def("f_max_uns", flood_max_unscoped);
+      //def("f_max_adv", flood_max_advert);
+      //def("loop", loop_detect);
+    }
+  };
+  RepeatPrefs repeat;
+
+  class CompanionPrefs : public ConfigSerializer {
+    NodePrefs* _parent;
+  protected:
+    void structure() override {
+      def("auto_max", _parent->autoadd_max_hops);  // 0 = no limit, 1 = direct (0 hops), N = up to N-1 hops (max 64)
+      def("defs_nm", _parent->default_scope_name, sizeof(_parent->default_scope_name));
+      def("defs_key", (void *) _parent->default_scope_key, sizeof(_parent->default_scope_key));
+      def("pin", _parent->ble_pin);
+      def("buzz_q", _parent->buzzer_quiet);
+      def("auto_add", _parent->autoadd_config);    // bitmask for auto-add contacts config
+      def("man_add", _parent->manual_add_contacts);
+      def("tel_base", _parent->telemetry_mode_base);
+      def("tel_loc", _parent->telemetry_mode_loc);
+      def("tel_env", _parent->telemetry_mode_env);
+    }
+  public:
+    CompanionPrefs(NodePrefs* parent) : _parent(parent) { }
+  };
+  CompanionPrefs companion;
+
+protected:
+  void structure() override {
+    def("name", node_name, sizeof(node_name));
+    //def("adv_int", advert_interval);
+    //def("f_adv_int", flood_advert_interval);
+    def("lat", node_lat);
+    def("lon", node_lon);
+    def("radio", radio);
+    def("gps", gps);
+    def("repeat", repeat);
+    def("comp", companion);
+  }
+public:
+  NodePrefs() : radio(this), gps(this), companion(this) { }
+  // new accessor methods
+  bool isRepeatEn() const { return repeat.disable_fwd == 0; }
+  void setRepeatEn(bool en) { repeat.disable_fwd = en ? 0 : 1; }
 };

src/helpers/ConfigSerializer.cpp

@@ -140,6 +140,23 @@ void ConfigSerializer::writeComma() {
   }
 }
 
+#include <Utils.h>
+
+void ConfigSerializer::def(const char* key, void* value, size_t len) {
+  if (_context->op() == OP::WRITE) {
+    writeComma();
+    _context->file()->print(key);
+    _context->file()->print(":\"");
+    mesh::Utils::printHex(*_context->file(), (uint8_t*) value, len);
+    _context->file()->print("\"");
+  } else {
+    if (_context->keyMatch(_depth, key)) {
+      memset(value, 0, len);
+      mesh::Utils::fromHex((uint8_t *)value, len, _context->getToken());
+    }
+  }
+}
+
 void ConfigSerializer::def(const char* key, char* value, size_t max_len) {
   if (_context->op() == OP::WRITE) {
     writeComma();

src/helpers/ConfigSerializer.h

@@ -48,6 +48,7 @@ protected:
   ConfigSerializer() { }
 
   void def(const char* key, char* value, size_t max_len);  // max_len inclusive of null
+  void def(const char* key, void* value, size_t len);  // binary blob (encoded in hex)
   void def(const char* key, int32_t& value);
   void def(const char* key, int16_t& value);
   void def(const char* key, int8_t& value);