From e7879264afb1f8aac7376ae74077fa2596bcffa3 Mon Sep 17 00:00:00 2001 From: formtapez Date: Fri, 12 Jun 2026 12:11:12 +0200 Subject: [PATCH] added some missing CLI commands --- docs/cli_commands.md | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/docs/cli_commands.md b/docs/cli_commands.md index 819b6133..b4a7b91a 100644 --- a/docs/cli_commands.md +++ b/docs/cli_commands.md @@ -29,12 +29,25 @@ This document provides an overview of CLI commands that can be sent to MeshCore **Usage:** - `reboot` +**Note:** No reply is sent. + +--- + +### Power-off the node +**Usage:** +- `poweroff`, or +- `shutdown +` +**Note:** No reply is sent. + --- ### Reset the clock and reboot **Usage:** - `clkreboot` +**Note:** No reply is sent. + --- ### Sync the clock with the remote device @@ -661,10 +674,21 @@ This document provides an overview of CLI commands that can be sent to MeshCore **Parameters:** - `value`: Maximum flood hop count (0-64) for a packet without a scope (no region set) -**Default:** `0xFF` - indicates it hasn't been set, will track flood.max until it is. +**Default:** `64` - indicates it hasn't been set, will track flood.max until it is. **Note:** An alternative to `region denyf *`, setting `flood.max.unscoped` to a lower value such as `3` would allow for local unscoped messages to propagate, while preventing noisy neighbors from flooding a local region. +--- + +#### Limit the number of hops for an advert flood message +**Usage:** +- `get flood.max.advert` +- `set flood.max.advert ` + +**Parameters:** +- `value`: Maximum flood hop count (0-64) for an advert packet + +**Default:** `8` ---