helper files for t1000e and LR1110

src/helpers/CustomLR1110.h

@@ -0,0 +1,17 @@
+#pragma once
+
+#include <RadioLib.h>
+
+#define LR1110_IRQ_HAS_PREAMBLE                     0b0000000100  //  4     4     valid LoRa header received
+#define LR1110_IRQ_HEADER_VALID                     0b0000010000  //  4     4     valid LoRa header received
+
+class CustomLR1110 : public LR1110 {
+  public:
+    CustomLR1110(Module *mod) : LR1110(mod) { }
+
+    bool isReceiving() {
+      uint16_t irq = getIrqStatus();
+      bool hasPreamble = ((irq & LR1110_IRQ_HEADER_VALID) && (irq & LR1110_IRQ_HAS_PREAMBLE));
+      return hasPreamble;
+    }
+};

src/helpers/CustomLR1110Wrapper.h

@@ -0,0 +1,27 @@
+#pragma once
+
+#include "CustomLR1110.h"
+#include "RadioLibWrappers.h"
+
+class CustomLR1110Wrapper : public RadioLibWrapper {
+public:
+  CustomLR1110Wrapper(CustomLR1110& radio, mesh::MainBoard& board) : RadioLibWrapper(radio, board) { }
+  bool isReceiving() override { 
+    if (((CustomLR1110 *)_radio)->isReceiving()) return true;
+
+    idle();  // put sx126x into standby
+    // do some basic CAD (blocks for ~12780 micros (on SF 10)!)
+    bool activity = (((CustomLR1110 *)_radio)->scanChannel() == RADIOLIB_LORA_DETECTED);
+    idle();
+
+    return activity;
+  }
+
+  void onSendFinished() override {
+    RadioLibWrapper::onSendFinished();
+    _radio->setPreambleLength(8); // overcomes weird issues with small and big pkts
+  }
+
+  float getLastRSSI() const override { return ((CustomLR1110 *)_radio)->getRSSI(); }
+  float getLastSNR() const override { return ((CustomLR1110 *)_radio)->getSNR(); }
+};

src/helpers/nrf52/T1000eBoard.cpp

@@ -0,0 +1,68 @@
+#include <Arduino.h>
+#include "T1000eBoard.h"
+
+#include <bluefruit.h>
+#include <Wire.h>
+
+
+
+#if 0
+static BLEDfu bledfu;
+
+static void connect_callback(uint16_t conn_handle)
+{
+    (void)conn_handle;
+    MESH_DEBUG_PRINTLN("BLE client connected");
+}
+
+static void disconnect_callback(uint16_t conn_handle, uint8_t reason)
+{
+    (void)conn_handle;
+    (void)reason;
+
+    MESH_DEBUG_PRINTLN("BLE client disconnected");
+}
+
+
+bool TrackerT1000eBoard::startOTAUpdate() {
+    // Config the peripheral connection with maximum bandwidth
+    // more SRAM required by SoftDevice
+    // Note: All config***() function must be called before begin()
+    Bluefruit.configPrphBandwidth(BANDWIDTH_MAX);
+    Bluefruit.configPrphConn(92, BLE_GAP_EVENT_LENGTH_MIN, 16, 16);
+
+    Bluefruit.begin(1, 0);
+    // Set max power. Accepted values are: -40, -30, -20, -16, -12, -8, -4, 0, 4
+    Bluefruit.setTxPower(4);
+    // Set the BLE device name
+    Bluefruit.setName("T1000E_OTA");
+
+    Bluefruit.Periph.setConnectCallback(connect_callback);
+    Bluefruit.Periph.setDisconnectCallback(disconnect_callback);
+
+    // To be consistent OTA DFU should be added first if it exists
+    bledfu.begin();
+
+    // Set up and start advertising
+    // Advertising packet
+    Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);
+    Bluefruit.Advertising.addTxPower();
+    Bluefruit.Advertising.addName();
+
+    /* Start Advertising
+     - Enable auto advertising if disconnected
+     - Interval:  fast mode = 20 ms, slow mode = 152.5 ms
+     - Timeout for fast mode is 30 seconds
+     - Start(timeout) with timeout = 0 will advertise forever (until connected)
+
+     For recommended advertising interval
+     https://developer.apple.com/library/content/qa/qa1931/_index.html
+    */
+    Bluefruit.Advertising.restartOnDisconnect(true);
+    Bluefruit.Advertising.setInterval(32, 244); // in unit of 0.625 ms
+    Bluefruit.Advertising.setFastTimeout(30);   // number of seconds in fast mode
+    Bluefruit.Advertising.start(0);             // 0 = Don't stop advertising after n seconds
+
+  return true;
+}
+#endif

src/helpers/nrf52/T1000eBoard.h

@@ -0,0 +1,55 @@
+#pragma once
+
+#include <MeshCore.h>
+#include <Arduino.h>
+
+// LoRa and SPI pins
+#define  P_LORA_DIO_1   (32 + 1)  // P1.1
+#define  P_LORA_NSS     (0 + 12)  // P0.12
+#define  P_LORA_RESET   (32 + 10) // P1.10
+#define  P_LORA_BUSY    (0 + 7)   // P0.7
+#define  P_LORA_SCLK    (0 + 11)  // P0.11
+#define  P_LORA_MISO    (32 + 8)  // P1.8
+#define  P_LORA_MOSI    (32 + 9)  // P0.9
+#define  LR1110_POWER_EN  37
+ 
+#define LR11X0_DIO_AS_RF_SWITCH  true
+#define LR11X0_DIO3_TCXO_VOLTAGE   1.6
+
+// built-ins
+//#define  PIN_VBAT_READ    5
+//#define  ADC_MULTIPLIER   (3 * 1.73 * 1000)
+
+class T1000eBoard : public mesh::MainBoard {
+protected:
+  uint8_t startup_reason;
+
+public:
+  void begin() {
+    // for future use, sub-classes SHOULD call this from their begin()
+    startup_reason = BD_STARTUP_NORMAL;
+
+//    pinMode(PIN_VBAT_READ, INPUT);
+
+// Doesn't seem to be a pwr en pin ...
+//    pinMode(LR1110_POWER_EN, OUTPUT);
+//    digitalWrite(LR1110_POWER_EN, HIGH);
+    delay(10);   // give sx1262 some time to power up
+  }
+
+  uint16_t getBattMilliVolts() override {
+    return 0;
+  }
+
+  uint8_t getStartupReason() const override { return startup_reason; }
+
+  const char* getManufacturerName() const override {
+    return "Seeed Tracker T1000-e";
+  }
+
+  void reboot() override {
+    NVIC_SystemReset();
+  }
+
+//  bool startOTAUpdate() override;
+};