mirror of https://github.com/meshcore-dev/MeshCore
Browse Source
- Add custom partition table for fitting larger firmware - Create LilyGoT3S3Board.h for board-specific functionality - Update all example files to support the T3 board with SX1276 - Configure build environment for optimizing firmware size - Set up the right pin configuration for SX1276 on LilyGo T3pull/62/head
Alex Wolden
1 year ago
7 changed files with 412 additions and 48 deletions
|
@ -0,0 +1,88 @@ |
|||
#pragma once |
|||
|
|||
#include <Arduino.h> |
|||
#include "ESP32Board.h" |
|||
#include <driver/rtc_io.h> |
|||
|
|||
// LoRa radio module pins for LilyGo T3S3
|
|||
// These need to be defined here for the SX1276 version
|
|||
#if defined(RADIO_CLASS) && defined(CustomSX1276) |
|||
// SX1276 pin definitions specific to LilyGo T3S3
|
|||
#define P_LORA_DIO_0 34 // DIO0 interrupt pin (SX1276 uses DIO0)
|
|||
#define P_LORA_DIO_1 33 // DIO1 interrupt pin
|
|||
#define P_LORA_NSS 7 // Chip select
|
|||
#define P_LORA_RESET 8 // Reset pin
|
|||
#define P_LORA_SCLK 5 // SPI clock
|
|||
#define P_LORA_MISO 3 // SPI MISO
|
|||
#define P_LORA_MOSI 6 // SPI MOSI
|
|||
#endif |
|||
|
|||
// Base class for LilyGo T-series boards
|
|||
class LilyGoTBoard : public ESP32Board { |
|||
public: |
|||
void begin() { |
|||
ESP32Board::begin(); |
|||
|
|||
esp_reset_reason_t reason = esp_reset_reason(); |
|||
if (reason == ESP_RST_DEEPSLEEP) { |
|||
long wakeup_source = esp_sleep_get_ext1_wakeup_status(); |
|||
if (wakeup_source & (1 << P_LORA_DIO_1)) { // received a LoRa packet (while in deep sleep)
|
|||
startup_reason = BD_STARTUP_RX_PACKET; |
|||
} |
|||
|
|||
rtc_gpio_hold_dis((gpio_num_t)P_LORA_NSS); |
|||
rtc_gpio_deinit((gpio_num_t)P_LORA_DIO_1); |
|||
} |
|||
} |
|||
|
|||
void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1) { |
|||
esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON); |
|||
|
|||
// Make sure the DIO1 and NSS GPIOs are hold on required levels during deep sleep
|
|||
rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY); |
|||
rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1); |
|||
|
|||
rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS); |
|||
|
|||
if (pin_wake_btn < 0) { |
|||
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet
|
|||
} else { |
|||
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet OR wake btn
|
|||
} |
|||
|
|||
if (secs > 0) { |
|||
esp_sleep_enable_timer_wakeup(secs * 1000000); |
|||
} |
|||
|
|||
// Finally set ESP32 into sleep
|
|||
esp_deep_sleep_start(); // CPU halts here and never returns!
|
|||
} |
|||
|
|||
uint16_t getBattMilliVolts() override { |
|||
analogReadResolution(12); |
|||
|
|||
uint32_t raw = 0; |
|||
for (int i = 0; i < 8; i++) { |
|||
raw += analogReadMilliVolts(PIN_VBAT_READ); |
|||
} |
|||
raw = raw / 8; |
|||
|
|||
return (2 * raw); |
|||
} |
|||
}; |
|||
|
|||
// Standard ESP32 version (for T3 board)
|
|||
class LilyGoT3Board : public LilyGoTBoard { |
|||
public: |
|||
const char* getManufacturerName() const override { |
|||
return "LilyGo T3"; |
|||
} |
|||
}; |
|||
|
|||
// For S3 variant
|
|||
class LilyGoT3S3Board : public LilyGoTBoard { |
|||
public: |
|||
const char* getManufacturerName() const override { |
|||
return "LilyGo T3S3"; |
|||
} |
|||
}; |
|||
Loading…
Reference in new issue