mirror of https://github.com/meshcore-dev/MeshCore
Rasul Ismailov
19 hours ago
committed by
GitHub
GitHub
7 changed files with 507 additions and 0 deletions
@ -0,0 +1,35 @@ |
|||
#include <Arduino.h> |
|||
#include <Wire.h> |
|||
|
|||
#include "PromicroBoard.h" |
|||
#include "target.h" |
|||
|
|||
void PromicroBoard::begin() { |
|||
NRF52Board::begin(); |
|||
btn_prev_state = HIGH; |
|||
|
|||
pinMode(PIN_VBAT_READ, INPUT); |
|||
|
|||
#ifdef UI_HAS_JOYSTICK |
|||
pinMode(PIN_BACK_BTN, INPUT_PULLUP); |
|||
pinMode(JOYSTICK_LEFT, INPUT_PULLUP); |
|||
pinMode(JOYSTICK_RIGHT, INPUT_PULLUP); |
|||
pinMode(PIN_USER_BTN, INPUT_PULLUP); |
|||
joystick_left.begin(); |
|||
joystick_right.begin(); |
|||
user_btn.begin(); |
|||
back_btn.begin(); |
|||
#else if defined (BUTTON_PIN) |
|||
pinMode(BUTTON_PIN, INPUT_PULLUP); |
|||
#endif |
|||
|
|||
#if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL) |
|||
Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL); |
|||
#endif |
|||
|
|||
Wire.begin(); |
|||
|
|||
pinMode(SX126X_POWER_EN, OUTPUT); |
|||
digitalWrite(SX126X_POWER_EN, HIGH); |
|||
delay(10); // give sx1262 some time to power up
|
|||
} |
|||
@ -0,0 +1,79 @@ |
|||
#pragma once |
|||
|
|||
#include <MeshCore.h> |
|||
#include <Arduino.h> |
|||
#include <helpers/NRF52Board.h> |
|||
|
|||
#define P_LORA_NSS 13 //P1.13 45
|
|||
#define P_LORA_DIO_1 11 //P0.10 10
|
|||
#define P_LORA_RESET 10 //P0.09 9
|
|||
#define P_LORA_BUSY 16 //P0.29 29
|
|||
#define P_LORA_MISO 15 //P0.02 2
|
|||
#define P_LORA_SCLK 12 //P1.11 43
|
|||
#define P_LORA_MOSI 14 //P1.15 47
|
|||
#define SX126X_POWER_EN 22 //P0.13 13
|
|||
#define SX126X_RXEN 2 //P0.17
|
|||
#define SX126X_TXEN RADIOLIB_NC |
|||
#define SX126X_DIO2_AS_RF_SWITCH true |
|||
#define SX126X_DIO3_TCXO_VOLTAGE (1.8f) |
|||
|
|||
#define PIN_VBAT_READ 17 |
|||
#define ADC_MULTIPLIER (1.815f) // dependent on voltage divider resistors. TODO: more accurate battery tracking
|
|||
|
|||
class PromicroBoard : public NRF52BoardDCDC { |
|||
protected: |
|||
uint8_t btn_prev_state; |
|||
float adc_mult = ADC_MULTIPLIER; |
|||
|
|||
public: |
|||
PromicroBoard() : NRF52Board("ProMicro_OTA") {} |
|||
void begin(); |
|||
|
|||
#define BATTERY_SAMPLES 8 |
|||
|
|||
uint16_t getBattMilliVolts() override { |
|||
analogReadResolution(12); |
|||
|
|||
uint32_t raw = 0; |
|||
for (int i = 0; i < BATTERY_SAMPLES; i++) { |
|||
raw += analogRead(PIN_VBAT_READ); |
|||
} |
|||
raw = raw / BATTERY_SAMPLES; |
|||
return (adc_mult * raw); |
|||
} |
|||
|
|||
bool setAdcMultiplier(float multiplier) override { |
|||
if (multiplier == 0.0f) { |
|||
adc_mult = ADC_MULTIPLIER;} |
|||
else { |
|||
adc_mult = multiplier; |
|||
} |
|||
return true; |
|||
} |
|||
float getAdcMultiplier() const override { |
|||
if (adc_mult == 0.0f) { |
|||
return ADC_MULTIPLIER; |
|||
} else { |
|||
return adc_mult; |
|||
} |
|||
} |
|||
|
|||
const char* getManufacturerName() const override { |
|||
return "ProMicro DIY"; |
|||
} |
|||
|
|||
int buttonStateChanged() { |
|||
#ifdef BUTTON_PIN |
|||
uint8_t v = digitalRead(BUTTON_PIN); |
|||
if (v != btn_prev_state) { |
|||
btn_prev_state = v; |
|||
return (v == LOW) ? 1 : -1; |
|||
} |
|||
#endif |
|||
return 0; |
|||
} |
|||
|
|||
void powerOff() override { |
|||
sd_power_system_off(); |
|||
} |
|||
}; |
|||
@ -0,0 +1,166 @@ |
|||
[FaketecMiniX] |
|||
extends = nrf52_base |
|||
board = promicro_nrf52840 |
|||
build_flags = ${nrf52_base.build_flags} |
|||
-I variants/faketec_minix |
|||
-D PROMICRO |
|||
-D USE_SX1262 |
|||
-D RADIO_CLASS=CustomSX1262 |
|||
-D WRAPPER_CLASS=CustomSX1262Wrapper |
|||
-D LORA_TX_POWER=22 |
|||
-D SX126X_CURRENT_LIMIT=140 |
|||
-D SX126X_RX_BOOSTED_GAIN=1 |
|||
-D PIN_OLED_RESET=-1 |
|||
-D ENV_INCLUDE_GPS=1 |
|||
build_src_filter = ${nrf52_base.build_src_filter} |
|||
+<helpers/sensors> |
|||
+<../variants/faketec_minix> |
|||
lib_deps= ${nrf52_base.lib_deps} |
|||
adafruit/Adafruit SSD1306 @ ^2.5.13 |
|||
stevemarple/MicroNMEA @ ^2.0.6 |
|||
end2endzone/NonBlockingRTTTL@^1.3.0 |
|||
|
|||
[env:FaketecMiniX_repeater] |
|||
extends = FaketecMiniX |
|||
build_src_filter = ${FaketecMiniX.build_src_filter} |
|||
+<../examples/simple_repeater> |
|||
+<helpers/ui/SSD1306Display.cpp> |
|||
+<helpers/ui/MomentaryButton.cpp> |
|||
build_flags = |
|||
${FaketecMiniX.build_flags} |
|||
-D ADVERT_NAME='"Faketec-MiniX Repeater"' |
|||
-D ADVERT_LAT=0.0 |
|||
-D ADVERT_LON=0.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
-D MAX_NEIGHBOURS=50 |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
lib_deps = ${FaketecMiniX.lib_deps} |
|||
adafruit/RTClib @ ^2.1.3 |
|||
|
|||
[env:FaketecMiniX_repeater_bridge_rs232_serial1] |
|||
extends = FaketecMiniX |
|||
build_src_filter = ${FaketecMiniX.build_src_filter} |
|||
+<../examples/simple_repeater> |
|||
+<helpers/ui/SSD1306Display.cpp> |
|||
+<helpers/ui/MomentaryButton.cpp> |
|||
+<helpers/bridges/RS232Bridge.cpp> |
|||
build_flags = |
|||
${FaketecMiniX.build_flags} |
|||
-D ADVERT_NAME='"Faketec-MiniX RS232 Bridge"' |
|||
-D ADVERT_LAT=0.0 |
|||
-D ADVERT_LON=0.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
-D MAX_NEIGHBOURS=50 |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D WITH_RS232_BRIDGE=Serial1 |
|||
-D WITH_RS232_BRIDGE_RX=PIN_SERIAL1_RX |
|||
-D WITH_RS232_BRIDGE_TX=PIN_SERIAL1_TX |
|||
-UENV_INCLUDE_GPS |
|||
; -D BRIDGE_DEBUG=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
lib_deps = ${FaketecMiniX.lib_deps} |
|||
adafruit/RTClib @ ^2.1.3 |
|||
|
|||
[env:FaketecMiniX_room_server] |
|||
extends = FaketecMiniX |
|||
build_src_filter = ${FaketecMiniX.build_src_filter} |
|||
+<../examples/simple_room_server> |
|||
+<helpers/ui/SSD1306Display.cpp> |
|||
+<helpers/ui/MomentaryButton.cpp> |
|||
build_flags = ${FaketecMiniX.build_flags} |
|||
-D ADVERT_NAME='"Faketec-MiniX Room"' |
|||
-D ADVERT_LAT=0.0 |
|||
-D ADVERT_LON=0.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
-D ROOM_PASSWORD='"hello"' |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
lib_deps = ${FaketecMiniX.lib_deps} |
|||
adafruit/RTClib @ ^2.1.3 |
|||
|
|||
[env:FaketecMiniX_terminal_chat] |
|||
extends = FaketecMiniX |
|||
build_flags = ${FaketecMiniX.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${FaketecMiniX.build_src_filter} |
|||
+<../examples/simple_secure_chat/main.cpp> |
|||
lib_deps = ${FaketecMiniX.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
adafruit/RTClib @ ^2.1.3 |
|||
|
|||
[env:FaketecMiniX_companion_radio_usb] |
|||
extends = FaketecMiniX |
|||
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld |
|||
board_upload.maximum_size = 712704 |
|||
build_flags = ${FaketecMiniX.build_flags} |
|||
-I examples/companion_radio/ui-new |
|||
-D MAX_CONTACTS=350 |
|||
-D MAX_GROUP_CHANNELS=40 |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D PIN_BUZZER=0 |
|||
-D PIN_VIBRATION=1 |
|||
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1 |
|||
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1 |
|||
build_src_filter = ${FaketecMiniX.build_src_filter} |
|||
+<helpers/ui/SSD1306Display.cpp> |
|||
+<helpers/ui/MomentaryButton.cpp> |
|||
+<helpers/ui/buzzer.cpp> |
|||
+<helpers/ui/GenericVibration.cpp> |
|||
+<../examples/companion_radio/*.cpp> |
|||
+<../examples/companion_radio/ui-new/*.cpp> |
|||
lib_deps = ${FaketecMiniX.lib_deps} |
|||
adafruit/RTClib @ ^2.1.3 |
|||
densaugeo/base64 @ ~1.4.0 |
|||
|
|||
[env:FaketecMiniX_companion_radio_ble] |
|||
extends = FaketecMiniX |
|||
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld |
|||
board_upload.maximum_size = 712704 |
|||
build_flags = ${FaketecMiniX.build_flags} |
|||
-I examples/companion_radio/ui-new |
|||
-D MAX_CONTACTS=350 |
|||
-D MAX_GROUP_CHANNELS=40 |
|||
-D BLE_PIN_CODE=123456 |
|||
-D BLE_DEBUG_LOGGING=1 |
|||
-D OFFLINE_QUEUE_SIZE=256 |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D PIN_BUZZER=0 |
|||
-D PIN_VIBRATION=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
-D MESH_DEBUG=1 |
|||
build_src_filter = ${FaketecMiniX.build_src_filter} |
|||
+<helpers/nrf52/SerialBLEInterface.cpp> |
|||
+<helpers/ui/SSD1306Display.cpp> |
|||
+<helpers/ui/MomentaryButton.cpp> |
|||
+<helpers/ui/buzzer.cpp> |
|||
+<helpers/ui/GenericVibration.cpp> |
|||
+<../examples/companion_radio/*.cpp> |
|||
+<../examples/companion_radio/ui-new/*.cpp> |
|||
lib_deps = ${FaketecMiniX.lib_deps} |
|||
adafruit/RTClib @ ^2.1.3 |
|||
densaugeo/base64 @ ~1.4.0 |
|||
|
|||
[env:FaketecMiniX_sensor] |
|||
extends = FaketecMiniX |
|||
build_flags = |
|||
${FaketecMiniX.build_flags} |
|||
-D ADVERT_NAME='"Faketec-MiniX Sensor"' |
|||
-D ADVERT_LAT=0.0 |
|||
-D ADVERT_LON=0.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${FaketecMiniX.build_src_filter} |
|||
+<helpers/ui/SSD1306Display.cpp> |
|||
+<helpers/ui/MomentaryButton.cpp> |
|||
+<../examples/simple_sensor> |
|||
lib_deps = |
|||
${FaketecMiniX.lib_deps} |
|||
@ -0,0 +1,59 @@ |
|||
#include <Arduino.h> |
|||
#include "target.h" |
|||
#include <helpers/ArduinoHelpers.h> |
|||
|
|||
PromicroBoard board; |
|||
|
|||
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI); |
|||
|
|||
WRAPPER_CLASS radio_driver(radio, board); |
|||
|
|||
VolatileRTCClock fallback_clock; |
|||
AutoDiscoverRTCClock rtc_clock(fallback_clock); |
|||
#if ENV_INCLUDE_GPS |
|||
#include <helpers/sensors/MicroNMEALocationProvider.h> |
|||
MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock); |
|||
EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea); |
|||
#else |
|||
EnvironmentSensorManager sensors; |
|||
#endif |
|||
|
|||
#ifdef DISPLAY_CLASS |
|||
DISPLAY_CLASS display; |
|||
#ifdef UI_HAS_JOYSTICK |
|||
MomentaryButton user_btn(PIN_USER_BTN, 1000, true, true); |
|||
MomentaryButton joystick_left(JOYSTICK_LEFT, 1000, true, true); |
|||
MomentaryButton joystick_right(JOYSTICK_RIGHT, 1000, true, true); |
|||
MomentaryButton back_btn(PIN_BACK_BTN, 1000, true, true, true); |
|||
#else |
|||
MomentaryButton user_btn(PIN_USER_BTN, 1000, true, true); |
|||
#endif |
|||
#endif |
|||
|
|||
bool radio_init() { |
|||
rtc_clock.begin(Wire); |
|||
|
|||
return radio.std_init(&SPI); |
|||
} |
|||
|
|||
uint32_t radio_get_rng_seed() { |
|||
return radio.random(0x7FFFFFFF); |
|||
} |
|||
|
|||
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { |
|||
radio.setFrequency(freq); |
|||
radio.setSpreadingFactor(sf); |
|||
radio.setBandwidth(bw); |
|||
radio.setCodingRate(cr); |
|||
} |
|||
|
|||
void radio_set_tx_power(int8_t dbm) { |
|||
radio.setOutputPower(dbm); |
|||
} |
|||
|
|||
mesh::LocalIdentity radio_new_identity() { |
|||
RadioNoiseListener rng(radio); |
|||
return mesh::LocalIdentity(&rng); // create new random identity
|
|||
} |
|||
|
|||
|
|||
@ -0,0 +1,38 @@ |
|||
#pragma once |
|||
|
|||
#define RADIOLIB_STATIC_ONLY 1 |
|||
#include <RadioLib.h> |
|||
#include <helpers/radiolib/RadioLibWrappers.h> |
|||
#include <PromicroBoard.h> |
|||
#include <helpers/radiolib/CustomSX1262Wrapper.h> |
|||
#include <helpers/AutoDiscoverRTCClock.h> |
|||
#ifdef DISPLAY_CLASS |
|||
#include <helpers/ui/SSD1306Display.h> |
|||
#include <helpers/ui/MomentaryButton.h> |
|||
#endif |
|||
|
|||
#include <helpers/sensors/EnvironmentSensorManager.h> |
|||
|
|||
extern PromicroBoard board; |
|||
extern WRAPPER_CLASS radio_driver; |
|||
extern AutoDiscoverRTCClock rtc_clock; |
|||
extern EnvironmentSensorManager sensors; |
|||
|
|||
#ifdef DISPLAY_CLASS |
|||
extern DISPLAY_CLASS display; |
|||
#ifdef UI_HAS_JOYSTICK |
|||
extern MomentaryButton user_btn; |
|||
extern MomentaryButton joystick_left; |
|||
extern MomentaryButton joystick_right; |
|||
extern MomentaryButton back_btn; |
|||
#else |
|||
extern MomentaryButton user_btn; |
|||
#endif |
|||
#endif |
|||
|
|||
bool radio_init(); |
|||
uint32_t radio_get_rng_seed(); |
|||
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); |
|||
void radio_set_tx_power(int8_t dbm); |
|||
mesh::LocalIdentity radio_new_identity(); |
|||
|
|||
@ -0,0 +1,35 @@ |
|||
#include "variant.h" |
|||
#include "wiring_constants.h" |
|||
#include "wiring_digital.h" |
|||
|
|||
const uint32_t g_ADigitalPinMap[] = { |
|||
8, //P0.08 - D0
|
|||
6, //P0.06 - D1
|
|||
17,//P0.17 - D2
|
|||
20,//P0.20 - D3
|
|||
22,//P0.22 - D4
|
|||
24,//P0.24 - D5
|
|||
32,//P1.00 - D6
|
|||
11,//P0.11 - D7
|
|||
36,//P1.04 - D8
|
|||
38,//P1.06 - D9
|
|||
9, //P0.09 - D10
|
|||
10,//P0.10 - D11
|
|||
43,//P1.11 - D12
|
|||
45,//P1.13 - D13
|
|||
47,//P1.15 - D14
|
|||
2, //P0.02 - D15
|
|||
29,//P0.29 - D16
|
|||
31,//P0.31 - D17
|
|||
33,//P1.01 - 101 - D18 - joystic right
|
|||
34,//P1.02 - 102 - D19 - joystic center
|
|||
37,//P1.05 - 105 - D20
|
|||
39,//P1.07 - 107 - D21 - joystic left
|
|||
13,//P0.13 - D22 - POWER_PIN
|
|||
15 //P0.15 - D23 - BLED
|
|||
}; |
|||
|
|||
void initVariant() |
|||
{ |
|||
} |
|||
|
|||
@ -0,0 +1,95 @@ |
|||
/*
|
|||
* variant.h |
|||
* Copyright (C) 2023 Seeed K.K. |
|||
* MIT License |
|||
*/ |
|||
|
|||
#pragma once |
|||
|
|||
#include "WVariant.h" |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Low frequency clock source
|
|||
|
|||
#define VARIANT_MCK (64000000ul) |
|||
|
|||
#define USE_LFXO // 32.768 kHz crystal oscillator
|
|||
// #define USE_LFRC // 32.768 kHz RC oscillator
|
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Power
|
|||
|
|||
#define BATTERY_PIN (17) |
|||
#define ADC_RESOLUTION 12 |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Number of pins
|
|||
|
|||
#define PINS_COUNT (23) |
|||
#define NUM_DIGITAL_PINS (23) |
|||
#define NUM_ANALOG_INPUTS (3) |
|||
#define NUM_ANALOG_OUTPUTS (0) |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// UART pin definition
|
|||
|
|||
#define PIN_SERIAL1_TX (4) |
|||
#define PIN_SERIAL1_RX (3) |
|||
#define PIN_GPS_RX PIN_SERIAL1_RX |
|||
#define PIN_GPS_TX PIN_SERIAL1_TX |
|||
#define PIN_GPS_EN (5) |
|||
|
|||
#define PIN_BUZZER (0) // (T2)
|
|||
#define PIN_VIBRATION (1) // (T3)
|
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// I2C pin definition
|
|||
|
|||
#define WIRE_INTERFACES_COUNT 1 |
|||
|
|||
#define PIN_WIRE_SDA (8) |
|||
#define PIN_WIRE_SCL (7) |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// SPI pin definition
|
|||
|
|||
#define SPI_INTERFACES_COUNT 2 |
|||
|
|||
#define PIN_SPI_SCK (12) |
|||
#define PIN_SPI_MISO (15) |
|||
#define PIN_SPI_MOSI (14) |
|||
|
|||
#define PIN_SPI_NSS (13) |
|||
|
|||
#define PIN_SPI1_SCK -1//(18)
|
|||
#define PIN_SPI1_MISO -1//(19)
|
|||
#define PIN_SPI1_MOSI -1//(20)
|
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Builtin LEDs
|
|||
|
|||
#define PIN_LED (1) |
|||
#define LED_PIN PIN_LED |
|||
#define LED_BLUE (23) |
|||
#define LED_RED LED_BLUE |
|||
#define LED_GREEN LED_BLUE |
|||
#define LED_BUILTIN PIN_LED |
|||
#define LED_STATE_ON 1 |
|||
#define PIN_STATUS_LED PIN_LED |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Builtin buttons
|
|||
|
|||
#define UI_HAS_JOYSTICK 1 |
|||
#define PIN_BUTTON1 (6) |
|||
#define PIN_BACK_BTN PIN_BUTTON1 |
|||
// #define PIN_USER_BTN PIN_BUTTON1
|
|||
#define JOYSTICK_LEFT (21) // encoder left
|
|||
#define JOYSTICK_RIGHT (18) // encoder right
|
|||
#define PIN_USER_BTN (19)// encoder press
|
|||
// #define PIN_USER_BTN PIN_BUTTON1
|
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Buzzer & Vibro
|
|||
#define PIN_BUZZER (0) |
|||
#define PIN_VIBRATION (1) |
|||
Loading…
Reference in new issue