mirror of https://github.com/meshcore-dev/MeshCore
ripplebiz
9 months ago
committed by
GitHub
GitHub
8 changed files with 518 additions and 16 deletions
@ -0,0 +1,81 @@ |
|||
#include <Arduino.h> |
|||
#include "RAKWismeshTagBoard.h" |
|||
|
|||
#include <bluefruit.h> |
|||
#include <Wire.h> |
|||
|
|||
static BLEDfu bledfu; |
|||
|
|||
static void connect_callback(uint16_t conn_handle) { |
|||
(void)conn_handle; |
|||
MESH_DEBUG_PRINTLN("BLE client connected"); |
|||
} |
|||
|
|||
static void disconnect_callback(uint16_t conn_handle, uint8_t reason) { |
|||
(void)conn_handle; |
|||
(void)reason; |
|||
|
|||
MESH_DEBUG_PRINTLN("BLE client disconnected"); |
|||
} |
|||
|
|||
void RAKWismeshTagBoard::begin() { |
|||
// for future use, sub-classes SHOULD call this from their begin()
|
|||
startup_reason = BD_STARTUP_NORMAL; |
|||
pinMode(PIN_VBAT_READ, INPUT); |
|||
pinMode(PIN_USER_BTN, INPUT_PULLUP); |
|||
|
|||
Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL); |
|||
Wire.begin(); |
|||
|
|||
pinMode(SX126X_POWER_EN, OUTPUT); |
|||
digitalWrite(SX126X_POWER_EN, HIGH); |
|||
delay(10); // give sx1262 some time to power up
|
|||
} |
|||
|
|||
bool RAKWismeshTagBoard::startOTAUpdate(const char* id, char reply[]) { |
|||
// Config the peripheral connection with maximum bandwidth
|
|||
// more SRAM required by SoftDevice
|
|||
// Note: All config***() function must be called before begin()
|
|||
Bluefruit.configPrphBandwidth(BANDWIDTH_MAX); |
|||
Bluefruit.configPrphConn(92, BLE_GAP_EVENT_LENGTH_MIN, 16, 16); |
|||
|
|||
Bluefruit.begin(1, 0); |
|||
// Set max power. Accepted values are: -40, -30, -20, -16, -12, -8, -4, 0, 4
|
|||
Bluefruit.setTxPower(4); |
|||
// Set the BLE device name
|
|||
Bluefruit.setName("WISMESHTAG_OTA"); |
|||
|
|||
Bluefruit.Periph.setConnectCallback(connect_callback); |
|||
Bluefruit.Periph.setDisconnectCallback(disconnect_callback); |
|||
|
|||
// To be consistent OTA DFU should be added first if it exists
|
|||
bledfu.begin(); |
|||
|
|||
// Set up and start advertising
|
|||
// Advertising packet
|
|||
Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE); |
|||
Bluefruit.Advertising.addTxPower(); |
|||
Bluefruit.Advertising.addName(); |
|||
|
|||
/* Start Advertising
|
|||
- Enable auto advertising if disconnected |
|||
- Interval: fast mode = 20 ms, slow mode = 152.5 ms |
|||
- Timeout for fast mode is 30 seconds |
|||
- Start(timeout) with timeout = 0 will advertise forever (until connected) |
|||
|
|||
For recommended advertising interval |
|||
https://developer.apple.com/library/content/qa/qa1931/_index.html
|
|||
*/ |
|||
Bluefruit.Advertising.restartOnDisconnect(true); |
|||
Bluefruit.Advertising.setInterval(32, 244); // in unit of 0.625 ms
|
|||
Bluefruit.Advertising.setFastTimeout(30); // number of seconds in fast mode
|
|||
Bluefruit.Advertising.start(0); // 0 = Don't stop advertising after n seconds
|
|||
|
|||
uint8_t mac_addr[6]; |
|||
memset(mac_addr, 0, sizeof(mac_addr)); |
|||
Bluefruit.getAddr(mac_addr); |
|||
sprintf(reply, "OK - mac: %02X:%02X:%02X:%02X:%02X:%02X", |
|||
mac_addr[5], mac_addr[4], mac_addr[3], mac_addr[2], mac_addr[1], mac_addr[0]); |
|||
|
|||
return true; |
|||
} |
|||
@ -0,0 +1,80 @@ |
|||
#pragma once |
|||
|
|||
#include <MeshCore.h> |
|||
#include <Arduino.h> |
|||
|
|||
// built-ins
|
|||
#define PIN_VBAT_READ 5 |
|||
#define ADC_MULTIPLIER (3 * 1.73 * 1.187 * 1000) |
|||
|
|||
class RAKWismeshTagBoard : public mesh::MainBoard { |
|||
protected: |
|||
uint8_t startup_reason; |
|||
|
|||
public: |
|||
void begin(); |
|||
uint8_t getStartupReason() const override { return startup_reason; } |
|||
|
|||
#if defined(P_LORA_TX_LED) && defined(LED_STATE_ON) |
|||
void onBeforeTransmit() override { |
|||
digitalWrite(P_LORA_TX_LED, LED_STATE_ON); // turn TX LED on
|
|||
} |
|||
void onAfterTransmit() override { |
|||
digitalWrite(P_LORA_TX_LED, !LED_STATE_ON); // turn TX LED off
|
|||
} |
|||
#endif |
|||
|
|||
#define BATTERY_SAMPLES 8 |
|||
|
|||
uint16_t getBattMilliVolts() override { |
|||
analogReadResolution(12); |
|||
|
|||
uint32_t raw = 0; |
|||
for (int i = 0; i < BATTERY_SAMPLES; i++) { |
|||
raw += analogRead(PIN_VBAT_READ); |
|||
} |
|||
raw = raw / BATTERY_SAMPLES; |
|||
|
|||
return (ADC_MULTIPLIER * raw) / 4096; |
|||
} |
|||
|
|||
const char* getManufacturerName() const override { |
|||
return "RAK WisMesh Tag"; |
|||
} |
|||
|
|||
void reboot() override { |
|||
NVIC_SystemReset(); |
|||
} |
|||
|
|||
bool startOTAUpdate(const char* id, char reply[]) override; |
|||
|
|||
void powerOff() override { |
|||
#ifdef BUZZER_EN |
|||
digitalWrite(BUZZER_EN, LOW); |
|||
#endif |
|||
|
|||
#ifdef PIN_GPS_EN |
|||
digitalWrite(PIN_GPS_EN, LOW); |
|||
#endif |
|||
|
|||
// set led on and wait for button release before poweroff
|
|||
#ifdef LED_PIN |
|||
digitalWrite(LED_PIN, HIGH); |
|||
#endif |
|||
#ifdef BUTTON_PIN |
|||
while(digitalRead(BUTTON_PIN)); |
|||
#endif |
|||
#ifdef LED_GREEN |
|||
digitalWrite(LED_GREEN, LOW); |
|||
#endif |
|||
#ifdef LED_BLUE |
|||
digitalWrite(LED_BLUE, LOW); |
|||
#endif |
|||
|
|||
#ifdef BUTTON_PIN |
|||
nrf_gpio_cfg_sense_input(digitalPinToInterrupt(BUTTON_PIN), NRF_GPIO_PIN_NOPULL, NRF_GPIO_PIN_SENSE_HIGH); |
|||
#endif |
|||
|
|||
sd_power_system_off(); |
|||
} |
|||
}; |
|||
@ -0,0 +1,116 @@ |
|||
[rak_wismesh_tag] |
|||
extends = nrf52_base |
|||
platform = https://github.com/maxgerhardt/platform-nordicnrf52.git#rak |
|||
board = wiscore_rak4631 |
|||
board_check = true |
|||
build_flags = ${nrf52_base.build_flags} |
|||
${sensor_base.build_flags} |
|||
-I variants/rak_wismesh_tag |
|||
-I src/helpers/ui |
|||
-D RAK_WISMESH_TAG |
|||
-D RAK_BOARD |
|||
-D P_LORA_TX_LED=LED_GREEN |
|||
-D P_LORA_DIO_1=SX126X_DIO1 |
|||
-D P_LORA_NSS=PIN_SPI_NSS |
|||
-D P_LORA_RESET=SX126X_RESET |
|||
-D P_LORA_BUSY=SX126X_BUSY |
|||
-D P_LORA_SCLK=PIN_SPI_SCK |
|||
-D P_LORA_MISO=PIN_SPI_MISO |
|||
-D P_LORA_MOSI=PIN_SPI_MOSI |
|||
-D RADIO_CLASS=CustomSX1262 |
|||
-D WRAPPER_CLASS=CustomSX1262Wrapper |
|||
-D DISPLAY_CLASS=NullDisplayDriver |
|||
-D LORA_TX_POWER=22 |
|||
-D SX126X_CURRENT_LIMIT=140 |
|||
-D SX126X_RX_BOOSTED_GAIN=1 |
|||
-D PIN_BUZZER=21 |
|||
-D PIN_BOARD_SDA=PIN_WIRE_SDA |
|||
-D PIN_BOARD_SCL=PIN_WIRE_SCL |
|||
build_src_filter = ${nrf52_base.build_src_filter} |
|||
+<../variants/rak_wismesh_tag> |
|||
+<helpers/ui/buzzer.cpp> |
|||
+<helpers/ui/MomentaryButton.cpp> |
|||
+<helpers/ui/NullDisplayDriver.cpp> |
|||
+<helpers/sensors> |
|||
lib_deps = |
|||
${nrf52_base.lib_deps} |
|||
${sensor_base.lib_deps} |
|||
|
|||
[env:RAK_WisMesh_Tag_Repeater] |
|||
extends = rak_wismesh_tag |
|||
build_flags = |
|||
${rak_wismesh_tag.build_flags} |
|||
-D ADVERT_NAME='"RAK WM Repeater"' |
|||
-D ADVERT_LAT=0.0 |
|||
-D ADVERT_LON=0.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
-D MAX_NEIGHBOURS=8 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${rak_wismesh_tag.build_src_filter} |
|||
+<../examples/simple_repeater> |
|||
|
|||
[env:RAK_WisMesh_Tag_room_server] |
|||
extends = rak_wismesh_tag |
|||
build_flags = |
|||
${rak_wismesh_tag.build_flags} |
|||
-D ADVERT_NAME='"RAK WM Room"' |
|||
-D ADVERT_LAT=0.0 |
|||
-D ADVERT_LON=0.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
-D ROOM_PASSWORD='"hello"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${rak_wismesh_tag.build_src_filter} |
|||
+<../examples/simple_room_server> |
|||
|
|||
[env:RAK_WisMesh_Tag_companion_radio_usb] |
|||
extends = rak_wismesh_tag |
|||
build_flags = |
|||
${rak_wismesh_tag.build_flags} |
|||
-I examples/companion_radio/ui-orig |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1 |
|||
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1 |
|||
build_src_filter = ${rak_wismesh_tag.build_src_filter} |
|||
+<../examples/companion_radio/*.cpp> |
|||
+<../examples/companion_radio/ui-orig/*.cpp> |
|||
lib_deps = |
|||
${rak_wismesh_tag.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
end2endzone/NonBlockingRTTTL@^1.3.0 |
|||
|
|||
[env:RAK_WisMesh_Tag_companion_radio_ble] |
|||
extends = rak_wismesh_tag |
|||
build_flags = |
|||
${rak_wismesh_tag.build_flags} |
|||
-I examples/companion_radio/ui-orig |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
-D BLE_PIN_CODE=123456 |
|||
-D BLE_DEBUG_LOGGING=1 |
|||
-D OFFLINE_QUEUE_SIZE=256 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
-D MESH_DEBUG=1 |
|||
build_src_filter = ${rak_wismesh_tag.build_src_filter} |
|||
+<helpers/nrf52/SerialBLEInterface.cpp> |
|||
+<../examples/companion_radio/*.cpp> |
|||
+<../examples/companion_radio/ui-orig/*.cpp> |
|||
lib_deps = |
|||
${rak4631.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
end2endzone/NonBlockingRTTTL@^1.3.0 |
|||
|
|||
[env:RAK_WisMesh_Tag_sensor] |
|||
extends = rak4631 |
|||
build_flags = |
|||
${rak4631.build_flags} |
|||
-D ADVERT_NAME='"RAK WM Sensor"' |
|||
-D ADVERT_LAT=0.0 |
|||
-D ADVERT_LON=0.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
-D MESH_DEBUG=1 |
|||
build_src_filter = ${rak4631.build_src_filter} |
|||
+<../examples/simple_sensor> |
|||
@ -0,0 +1,54 @@ |
|||
#include <Arduino.h> |
|||
#include "target.h" |
|||
#include <helpers/ArduinoHelpers.h> |
|||
|
|||
RAKWismeshTagBoard board; |
|||
|
|||
#ifndef PIN_USER_BTN |
|||
#define PIN_USER_BTN (-1) |
|||
#endif |
|||
|
|||
#ifdef DISPLAY_CLASS |
|||
DISPLAY_CLASS display; |
|||
MomentaryButton user_btn(PIN_USER_BTN, 1000, true, true); |
|||
#endif |
|||
|
|||
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI); |
|||
|
|||
WRAPPER_CLASS radio_driver(radio, board); |
|||
|
|||
VolatileRTCClock fallback_clock; |
|||
AutoDiscoverRTCClock rtc_clock(fallback_clock); |
|||
|
|||
#if ENV_INCLUDE_GPS |
|||
#include <helpers/sensors/MicroNMEALocationProvider.h> |
|||
MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1); |
|||
EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea); |
|||
#else |
|||
EnvironmentSensorManager sensors; |
|||
#endif |
|||
|
|||
bool radio_init() { |
|||
rtc_clock.begin(Wire); |
|||
return radio.std_init(&SPI); |
|||
} |
|||
|
|||
uint32_t radio_get_rng_seed() { |
|||
return radio.random(0x7FFFFFFF); |
|||
} |
|||
|
|||
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { |
|||
radio.setFrequency(freq); |
|||
radio.setSpreadingFactor(sf); |
|||
radio.setBandwidth(bw); |
|||
radio.setCodingRate(cr); |
|||
} |
|||
|
|||
void radio_set_tx_power(uint8_t dbm) { |
|||
radio.setOutputPower(dbm); |
|||
} |
|||
|
|||
mesh::LocalIdentity radio_new_identity() { |
|||
RadioNoiseListener rng(radio); |
|||
return mesh::LocalIdentity(&rng); // create new random identity
|
|||
} |
|||
@ -0,0 +1,27 @@ |
|||
#pragma once |
|||
|
|||
#define RADIOLIB_STATIC_ONLY 1 |
|||
#include <RadioLib.h> |
|||
#include <helpers/radiolib/RadioLibWrappers.h> |
|||
#include <RAKWismeshTagBoard.h> |
|||
#include <helpers/radiolib/CustomSX1262Wrapper.h> |
|||
#include <helpers/AutoDiscoverRTCClock.h> |
|||
#include <helpers/sensors/EnvironmentSensorManager.h> |
|||
|
|||
#ifdef DISPLAY_CLASS |
|||
#include <helpers/ui/NullDisplayDriver.h> |
|||
extern DISPLAY_CLASS display; |
|||
#include <helpers/ui/MomentaryButton.h> |
|||
extern MomentaryButton user_btn; |
|||
#endif |
|||
|
|||
extern RAKWismeshTagBoard board; |
|||
extern WRAPPER_CLASS radio_driver; |
|||
extern AutoDiscoverRTCClock rtc_clock; |
|||
extern EnvironmentSensorManager sensors; |
|||
|
|||
bool radio_init(); |
|||
uint32_t radio_get_rng_seed(); |
|||
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); |
|||
void radio_set_tx_power(uint8_t dbm); |
|||
mesh::LocalIdentity radio_new_identity(); |
|||
@ -0,0 +1,21 @@ |
|||
#include "variant.h" |
|||
#include "nrf.h" |
|||
#include "wiring_constants.h" |
|||
#include "wiring_digital.h" |
|||
|
|||
const uint32_t g_ADigitalPinMap[] = { |
|||
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, |
|||
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47 |
|||
}; |
|||
|
|||
void initVariant() { |
|||
// LEDs
|
|||
pinMode(LED_BLUE, OUTPUT); |
|||
pinMode(LED_GREEN, OUTPUT); |
|||
digitalWrite(LED_BLUE, LOW); |
|||
digitalWrite(LED_GREEN, LOW); |
|||
|
|||
// GPS
|
|||
pinMode(PIN_GPS_EN, OUTPUT); |
|||
digitalWrite(PIN_GPS_EN, HIGH); |
|||
} |
|||
@ -0,0 +1,121 @@ |
|||
/*
|
|||
* variant.h |
|||
* Copyright (C) 2023 Seeed K.K. |
|||
* MIT License |
|||
*/ |
|||
|
|||
#pragma once |
|||
|
|||
#include "WVariant.h" |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Low frequency clock source
|
|||
|
|||
#define USE_LFXO // 32.768 kHz crystal oscillator
|
|||
#define VARIANT_MCK (64000000ul) |
|||
|
|||
#define WIRE_INTERFACES_COUNT (1) |
|||
#define PIN_TXCO (21) |
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Power
|
|||
|
|||
#define PIN_PWR_EN (12) |
|||
|
|||
#define BATTERY_PIN (5) |
|||
#define ADC_MULTIPLIER (1.73F) |
|||
|
|||
#define ADC_RESOLUTION (14) |
|||
#define BATTERY_SENSE_RES (12) |
|||
|
|||
#define AREF_VOLTAGE (3.0) |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Number of pins
|
|||
|
|||
#define PINS_COUNT (48) |
|||
#define NUM_DIGITAL_PINS (48) |
|||
#define NUM_ANALOG_INPUTS (6) |
|||
#define NUM_ANALOG_OUTPUTS (0) |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// UART pin definition
|
|||
|
|||
#define PIN_SERIAL1_RX (15) |
|||
#define PIN_SERIAL1_TX (16) |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// I2C pin definition
|
|||
#define WIRE_INTERFACES_COUNT (1) |
|||
#define PIN_WIRE_SDA (25) |
|||
#define PIN_WIRE_SCL (24) |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// SPI pin definition
|
|||
|
|||
#define SPI_INTERFACES_COUNT (2) |
|||
|
|||
#define PIN_SPI_MISO (45) |
|||
#define PIN_SPI_MOSI (44) |
|||
#define PIN_SPI_SCK (43) |
|||
#define PIN_SPI_NSS (42) |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Builtin LEDs
|
|||
|
|||
#define LED_RED (-1) |
|||
#define LED_BLUE (36) |
|||
#define LED_GREEN (35) |
|||
|
|||
//#define PIN_STATUS_LED LED_BLUE
|
|||
#define LED_BUILTIN LED_GREEN |
|||
#define LED_PIN LED_GREEN |
|||
#define LED_STATE_ON HIGH |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Builtin buttons
|
|||
|
|||
#define PIN_BUTTON1 (9) |
|||
#define BUTTON_PIN PIN_BUTTON1 |
|||
#define PIN_USER_BTN BUTTON_PIN |
|||
|
|||
#define PIN_BUTTON2 (12) |
|||
#define BUTTON_PIN2 PIN_BUTTON2 |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Lora
|
|||
|
|||
#define USE_SX1262 |
|||
#define LORA_CS (42) |
|||
#define SX126X_DIO1 (47) |
|||
#define SX126X_BUSY (46) |
|||
#define SX126X_RESET (38) |
|||
#define SX126X_POWER_EN (37) |
|||
#define SX126X_DIO2_AS_RF_SWITCH |
|||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8 |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// SPI1
|
|||
|
|||
#define PIN_SPI1_MISO (29) |
|||
#define PIN_SPI1_MOSI (30) |
|||
#define PIN_SPI1_SCK (3) |
|||
|
|||
// GxEPD2 needs that for a panel that is not even used !
|
|||
extern const int MISO; |
|||
extern const int MOSI; |
|||
extern const int SCK; |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// GPS
|
|||
|
|||
#define PIN_GPS_RX (PIN_SERIAL1_TX) |
|||
#define PIN_GPS_TX (PIN_SERIAL1_RX) |
|||
#define PIN_GPS_PPS (17) |
|||
#define PIN_GPS_EN (34) |
|||
|
|||
///////////////////////////////////////////////////////////////////////////////
|
|||
// OTHER PINS
|
|||
#define PIN_AREF (2) |
|||
#define PIN_NFC1 (9) |
|||
#define PIN_NFC2 (10) |
|||
#define PIN_BUZZER (21) |
|||
Loading…
Reference in new issue