mirror of https://github.com/meshcore-dev/MeshCore
taco
1 year ago
28 changed files with 1642 additions and 1200 deletions
File diff suppressed because it is too large
@ -0,0 +1,82 @@ |
|||
#pragma once |
|||
|
|||
|
|||
#include <Wire.h> |
|||
#include <Arduino.h> |
|||
#include "XPowersLib.h" |
|||
|
|||
// Defined using AXP2102
|
|||
#define XPOWERS_CHIP_AXP2101 |
|||
|
|||
// LoRa radio module pins for TBeam
|
|||
#define P_LORA_DIO_0 26 |
|||
#define P_LORA_DIO_2 32 |
|||
#define P_LORA_DIO_1 33 |
|||
#define P_LORA_NSS 18 |
|||
#define P_LORA_RESET 14 |
|||
#define P_LORA_BUSY RADIOLIB_NC |
|||
#define P_LORA_SCLK 5 |
|||
#define P_LORA_MISO 19 |
|||
#define P_LORA_MOSI 27 |
|||
|
|||
// built-ins
|
|||
//#define PIN_VBAT_READ 37
|
|||
//#define PIN_LED_BUILTIN 25
|
|||
|
|||
#include "ESP32Board.h" |
|||
|
|||
#include <driver/rtc_io.h> |
|||
|
|||
class TBeamBoard : public ESP32Board { |
|||
XPowersAXP2101 power; |
|||
|
|||
public: |
|||
void begin() { |
|||
ESP32Board::begin(); |
|||
|
|||
power.setALDO2Voltage(3300); |
|||
power.enableALDO2(); |
|||
|
|||
esp_reset_reason_t reason = esp_reset_reason(); |
|||
if (reason == ESP_RST_DEEPSLEEP) { |
|||
long wakeup_source = esp_sleep_get_ext1_wakeup_status(); |
|||
if (wakeup_source & (1 << P_LORA_DIO_1)) { // received a LoRa packet (while in deep sleep)
|
|||
startup_reason = BD_STARTUP_RX_PACKET; |
|||
} |
|||
|
|||
rtc_gpio_hold_dis((gpio_num_t)P_LORA_NSS); |
|||
rtc_gpio_deinit((gpio_num_t)P_LORA_DIO_1); |
|||
} |
|||
} |
|||
|
|||
void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1) { |
|||
esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON); |
|||
|
|||
// Make sure the DIO1 and NSS GPIOs are hold on required levels during deep sleep
|
|||
rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY); |
|||
rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1); |
|||
|
|||
rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS); |
|||
|
|||
if (pin_wake_btn < 0) { |
|||
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet
|
|||
} else { |
|||
esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet OR wake btn
|
|||
} |
|||
|
|||
if (secs > 0) { |
|||
esp_sleep_enable_timer_wakeup(secs * 1000000); |
|||
} |
|||
|
|||
// Finally set ESP32 into sleep
|
|||
esp_deep_sleep_start(); // CPU halts here and never returns!
|
|||
} |
|||
|
|||
uint16_t getBattMilliVolts() override { |
|||
return 0; |
|||
} |
|||
|
|||
const char* getManufacturerName() const override { |
|||
return "LilyGo T-Beam"; |
|||
} |
|||
}; |
|||
@ -0,0 +1,101 @@ |
|||
[Heltec_lora32_v2] |
|||
extends = esp32_base |
|||
board = heltec_wifi_lora_32_V2 ; heltec_wifi_lora_32_V2 |
|||
build_flags = |
|||
${esp32_base.build_flags} |
|||
-D HELTEC_LORA_V2 |
|||
-D PIN_BOARD_SDA=4 |
|||
-D PIN_BOARD_SCL=15 |
|||
-D PIN_USER_BTN=0 |
|||
-D PIN_OLED_RESET=16 |
|||
-D RADIO_CLASS=CustomSX1276 |
|||
-D WRAPPER_CLASS=CustomSX1276Wrapper |
|||
-D LORA_TX_POWER=20 |
|||
-D P_LORA_TX_LED=25 |
|||
build_src_filter = ${esp32_base.build_src_filter} |
|||
lib_deps = |
|||
${esp32_base.lib_deps} |
|||
adafruit/Adafruit SSD1306 @ ^2.5.13 |
|||
|
|||
[env:Heltec_v2_repeater] |
|||
extends = Heltec_lora32_v2 |
|||
build_flags = |
|||
${Heltec_lora32_v2.build_flags} |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D ADVERT_NAME='"Heltec Repeater"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${Heltec_lora32_v2.build_src_filter} |
|||
+<../examples/simple_repeater> |
|||
+<helpers/ui/*.cpp> |
|||
|
|||
[env:Heltec_v2_room_server] |
|||
extends = Heltec_lora32_v2 |
|||
build_flags = |
|||
${Heltec_lora32_v2.build_flags} |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D ADVERT_NAME='"Heltec Room"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
-D ROOM_PASSWORD='"hello"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${Heltec_lora32_v2.build_src_filter} |
|||
+<helpers/ui/*.cpp> |
|||
+<../examples/simple_room_server> |
|||
|
|||
[env:Heltec_v2_terminal_chat] |
|||
extends = Heltec_lora32_v2 |
|||
build_flags = |
|||
${Heltec_lora32_v2.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${Heltec_lora32_v2.build_src_filter} |
|||
+<../examples/simple_secure_chat/main.cpp> |
|||
lib_deps = |
|||
${Heltec_lora32_v2.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
|
|||
[env:Heltec_v2_companion_radio_usb] |
|||
extends = Heltec_lora32_v2 |
|||
build_flags = |
|||
${Heltec_lora32_v2.build_flags} |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1 |
|||
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1 |
|||
build_src_filter = ${Heltec_lora32_v2.build_src_filter} |
|||
+<helpers/esp32/*.cpp> |
|||
+<helpers/ui/*.cpp> |
|||
+<../examples/companion_radio> |
|||
lib_deps = |
|||
${Heltec_lora32_v2.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
|
|||
[env:Heltec_v2_companion_radio_ble] |
|||
extends = Heltec_lora32_v2 |
|||
build_flags = |
|||
${Heltec_lora32_v2.build_flags} |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
-D BLE_PIN_CODE=0 |
|||
-D BLE_DEBUG_LOGGING=1 |
|||
; -D ENABLE_PRIVATE_KEY_IMPORT=1 |
|||
; -D ENABLE_PRIVATE_KEY_EXPORT=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${Heltec_lora32_v2.build_src_filter} |
|||
+<helpers/esp32/*.cpp> |
|||
+<helpers/ui/*.cpp> |
|||
+<../examples/companion_radio> |
|||
lib_deps = |
|||
${Heltec_lora32_v2.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
@ -0,0 +1,173 @@ |
|||
[Heltec_lora32_v3] |
|||
extends = esp32_base |
|||
board = esp32-s3-devkitc-1 |
|||
build_flags = |
|||
${esp32_base.build_flags} |
|||
-D HELTEC_LORA_V3 |
|||
-D RADIO_CLASS=CustomSX1262 |
|||
-D WRAPPER_CLASS=CustomSX1262Wrapper |
|||
-D LORA_TX_POWER=22 |
|||
-D P_LORA_TX_LED=35 |
|||
-D PIN_BOARD_SDA=17 |
|||
-D PIN_BOARD_SCL=18 |
|||
-D PIN_USER_BTN=0 |
|||
-D SX126X_DIO2_AS_RF_SWITCH=true |
|||
-D SX126X_DIO3_TCXO_VOLTAGE=1.8 |
|||
-D SX126X_CURRENT_LIMIT=130.0f ; for best TX power! |
|||
-D SX126X_RX_BOOSTED_GAIN=1 |
|||
build_src_filter = ${esp32_base.build_src_filter} |
|||
lib_deps = |
|||
${esp32_base.lib_deps} |
|||
adafruit/Adafruit SSD1306 @ ^2.5.13 |
|||
|
|||
[env:Heltec_v3_repeater] |
|||
extends = Heltec_lora32_v3 |
|||
build_flags = |
|||
${Heltec_lora32_v3.build_flags} |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D ADVERT_NAME='"Heltec Repeater"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
-D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${Heltec_lora32_v3.build_src_filter} |
|||
+<helpers/ui/*.cpp> |
|||
+<../examples/simple_repeater> |
|||
|
|||
[env:Heltec_v3_room_server] |
|||
extends = Heltec_lora32_v3 |
|||
build_flags = |
|||
${Heltec_lora32_v3.build_flags} |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D ADVERT_NAME='"Heltec Room"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
-D ROOM_PASSWORD='"hello"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${Heltec_lora32_v3.build_src_filter} |
|||
+<helpers/ui/*.cpp> |
|||
+<../examples/simple_room_server> |
|||
|
|||
[env:Heltec_v3_terminal_chat] |
|||
extends = Heltec_lora32_v3 |
|||
build_flags = |
|||
${Heltec_lora32_v3.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${Heltec_lora32_v3.build_src_filter} |
|||
+<../examples/simple_secure_chat/main.cpp> |
|||
lib_deps = |
|||
${Heltec_lora32_v3.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
|
|||
[env:Heltec_v3_companion_radio_usb] |
|||
extends = Heltec_lora32_v3 |
|||
build_flags = |
|||
${Heltec_lora32_v3.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
; -D ENABLE_PRIVATE_KEY_IMPORT=1 |
|||
; -D ENABLE_PRIVATE_KEY_EXPORT=1 |
|||
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1 |
|||
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1 |
|||
build_src_filter = ${Heltec_lora32_v3.build_src_filter} |
|||
+<helpers/ui/*.cpp> |
|||
+<../examples/companion_radio> |
|||
lib_deps = |
|||
${Heltec_lora32_v3.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
|
|||
[env:Heltec_v3_companion_radio_ble] |
|||
extends = Heltec_lora32_v3 |
|||
build_flags = |
|||
${Heltec_lora32_v3.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D BLE_PIN_CODE=0 ; dynamic, random PIN |
|||
-D BLE_DEBUG_LOGGING=1 |
|||
; -D ENABLE_PRIVATE_KEY_IMPORT=1 |
|||
; -D ENABLE_PRIVATE_KEY_EXPORT=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${Heltec_lora32_v3.build_src_filter} |
|||
+<helpers/ui/*.cpp> |
|||
+<helpers/esp32/*.cpp> |
|||
+<../examples/companion_radio> |
|||
lib_deps = |
|||
${Heltec_lora32_v3.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
|
|||
[env:Heltec_v3_companion_radio_wifi] |
|||
extends = Heltec_lora32_v3 |
|||
build_flags = |
|||
${Heltec_lora32_v3.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D WIFI_DEBUG_LOGGING=1 |
|||
-D WIFI_SSID='"myssid"' |
|||
-D WIFI_PWD='"mypwd"' |
|||
; -D ENABLE_PRIVATE_KEY_IMPORT=1 |
|||
; -D ENABLE_PRIVATE_KEY_EXPORT=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${Heltec_lora32_v3.build_src_filter} |
|||
+<helpers/ui/*.cpp> |
|||
+<helpers/esp32/*.cpp> |
|||
+<../examples/companion_radio> |
|||
lib_deps = |
|||
${Heltec_lora32_v3.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
|
|||
[env:Heltec_WSL3_repeater] |
|||
extends = Heltec_lora32_v3 |
|||
build_flags = |
|||
${Heltec_lora32_v3.build_flags} |
|||
-D ADVERT_NAME='"Heltec Repeater"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
-D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${Heltec_lora32_v3.build_src_filter} |
|||
+<../examples/simple_repeater> |
|||
|
|||
[env:Heltec_WSL3_room_server] |
|||
extends = Heltec_lora32_v3 |
|||
build_src_filter = ${Heltec_lora32_v3.build_src_filter} |
|||
+<../examples/simple_room_server> |
|||
build_flags = |
|||
${Heltec_lora32_v3.build_flags} |
|||
-D ADVERT_NAME='"Heltec Room"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
-D ROOM_PASSWORD='"hello"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
|
|||
[env:Heltec_WSL3_companion_radio_ble] |
|||
extends = Heltec_lora32_v3 |
|||
build_flags = |
|||
${Heltec_lora32_v3.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
-D BLE_PIN_CODE=123456 |
|||
-D BLE_DEBUG_LOGGING=1 |
|||
; -D ENABLE_PRIVATE_KEY_IMPORT=1 |
|||
; -D ENABLE_PRIVATE_KEY_EXPORT=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${Heltec_lora32_v3.build_src_filter} |
|||
+<helpers/esp32/*.cpp> |
|||
+<../examples/companion_radio> |
|||
lib_deps = |
|||
${Heltec_lora32_v3.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
@ -0,0 +1,116 @@ |
|||
[LilyGo_T3S3_sx1262] |
|||
extends = esp32_base |
|||
board = t3_s3_v1_x |
|||
build_flags = |
|||
${esp32_base.build_flags} |
|||
-D LILYGO_T3S3 |
|||
-D P_LORA_DIO_1=33 |
|||
-D P_LORA_NSS=7 |
|||
-D P_LORA_RESET=8 ; RADIOLIB_NC |
|||
-D P_LORA_BUSY=34 |
|||
-D P_LORA_SCLK=5 |
|||
-D P_LORA_MISO=3 |
|||
-D P_LORA_MOSI=6 |
|||
-D P_LORA_TX_LED=37 |
|||
-D PIN_VBAT_READ=1 |
|||
-D PIN_USER_BTN=0 |
|||
-D PIN_BOARD_SDA=18 |
|||
-D PIN_BOARD_SCL=17 |
|||
-D P_LORA_TX_LED=37 |
|||
-D PIN_OLED_RESET=21 |
|||
-D SX126X_DIO2_AS_RF_SWITCH=true |
|||
-D SX126X_DIO3_TCXO_VOLTAGE=1.8 |
|||
-D SX126X_CURRENT_LIMIT=130 |
|||
-D RADIO_CLASS=CustomSX1262 |
|||
-D WRAPPER_CLASS=CustomSX1262Wrapper |
|||
-D LORA_TX_POWER=22 |
|||
-D SX126X_RX_BOOSTED_GAIN=1 |
|||
build_src_filter = ${esp32_base.build_src_filter} |
|||
lib_deps = |
|||
${esp32_base.lib_deps} |
|||
adafruit/Adafruit SSD1306 @ ^2.5.13 |
|||
|
|||
; === LilyGo T3S3 with SX1262 environments === |
|||
[env:LilyGo_T3S3_sx1262_Repeater] |
|||
extends = LilyGo_T3S3_sx1262 |
|||
build_flags = |
|||
${LilyGo_T3S3_sx1262.build_flags} |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D ADVERT_NAME='"T3S3-1262 Repeater"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${LilyGo_T3S3_sx1262.build_src_filter} |
|||
+<helpers/ui/*.cpp> |
|||
+<../examples/simple_repeater> |
|||
|
|||
[env:LilyGo_T3S3_sx1262_terminal_chat] |
|||
extends = LilyGo_T3S3_sx1262 |
|||
build_flags = |
|||
${LilyGo_T3S3_sx1262.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${LilyGo_T3S3_sx1262.build_src_filter} |
|||
+<../examples/simple_secure_chat/main.cpp> |
|||
lib_deps = |
|||
${LilyGo_T3S3_sx1262.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
|
|||
[env:LilyGo_T3S3_sx1262_room_server] |
|||
extends = LilyGo_T3S3_sx1262 |
|||
build_flags = |
|||
${LilyGo_T3S3_sx1262.build_flags} |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D ADVERT_NAME='"T3S3-1262 Room"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
-D ROOM_PASSWORD='"hello"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${LilyGo_T3S3_sx1262.build_src_filter} |
|||
+<helpers/ui/*.cpp> |
|||
+<../examples/simple_room_server> |
|||
|
|||
[env:LilyGo_T3S3_sx1262_companion_radio_usb] |
|||
extends = LilyGo_T3S3_sx1262 |
|||
build_flags = |
|||
${LilyGo_T3S3_sx1262.build_flags} |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
; -D ENABLE_PRIVATE_KEY_IMPORT=1 |
|||
; -D ENABLE_PRIVATE_KEY_EXPORT=1 |
|||
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1 |
|||
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1 |
|||
build_src_filter = ${LilyGo_T3S3_sx1262.build_src_filter} |
|||
+<helpers/ui/*.cpp> |
|||
+<../examples/companion_radio> |
|||
lib_deps = |
|||
${LilyGo_T3S3_sx1262.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
|
|||
[env:LilyGo_T3S3_sx1262_companion_radio_ble] |
|||
extends = LilyGo_T3S3_sx1262 |
|||
build_flags = |
|||
${LilyGo_T3S3_sx1262.build_flags} |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
-D BLE_PIN_CODE=123456 |
|||
-D BLE_DEBUG_LOGGING=1 |
|||
; -D ENABLE_PRIVATE_KEY_IMPORT=1 |
|||
; -D ENABLE_PRIVATE_KEY_EXPORT=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${LilyGo_T3S3_sx1262.build_src_filter} |
|||
+<helpers/esp32/*.cpp> |
|||
+<helpers/ui/*.cpp> |
|||
+<../examples/companion_radio> |
|||
lib_deps = |
|||
${LilyGo_T3S3_sx1262.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
@ -0,0 +1,36 @@ |
|||
[LilyGo_TBeam] |
|||
extends = esp32_base |
|||
board = ttgo-t-beam |
|||
build_flags = |
|||
${esp32_base.build_flags} |
|||
-D LILYGO_TBEAM |
|||
-D RADIO_CLASS=CustomSX1276 |
|||
-D WRAPPER_CLASS=CustomSX1276Wrapper |
|||
-D LORA_TX_POWER=20 |
|||
-D P_LORA_TX_LED=4 |
|||
build_src_filter = ${esp32_base.build_src_filter} |
|||
board_build.partitions = min_spiffs.csv ; get around 4mb flash limit |
|||
|
|||
[env:Tbeam_companion_radio_ble] |
|||
extends = LilyGo_TBeam |
|||
board_build.upload.maximum_ram_size=2000000 |
|||
build_flags = |
|||
${LilyGo_TBeam.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=1 |
|||
-D BLE_PIN_CODE=123456 |
|||
-D BLE_DEBUG_LOGGING=1 |
|||
-D MESH_PACKET_LOGGING=1 |
|||
-D MESH_DEBUG=1 |
|||
-D RADIOLIB_DEBUG_BASIC=1 |
|||
; -D ENABLE_PRIVATE_KEY_IMPORT=1 |
|||
; -D ENABLE_PRIVATE_KEY_EXPORT=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${LilyGo_TBeam.build_src_filter} |
|||
+<helpers/esp32/*.cpp> |
|||
+<../examples/companion_radio/main.cpp> |
|||
lib_deps = |
|||
${LilyGo_TBeam.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
lewisxhe/XPowersLib@^0.2.7 |
|||
@ -0,0 +1,111 @@ |
|||
[LilyGo_TLora_V2_1_1_6] |
|||
extends = esp32_base |
|||
board = ttgo-lora32-v1 ; LILYGO T-LoRa V2.1-1.6 ESP32 with SX1276 |
|||
build_unflags = -Os |
|||
build_type = release ; Set build type to release |
|||
board_build.partitions = min_spiffs.csv ; get around 4mb flash limit |
|||
build_flags = |
|||
${esp32_base.build_flags} |
|||
-Os -ffunction-sections -fdata-sections ; Optimize for size |
|||
-D LILYGO_TLORA ; LILYGO T-LoRa V2.1-1.6 ESP32 with SX1276 |
|||
-D P_LORA_DIO_0=26 ; SX1276 DIO0 interrupt pin |
|||
-D P_LORA_DIO_1=33 ; SX1276 DIO1 interrupt pin |
|||
-D P_LORA_NSS=18 ; Chip select - SS pin |
|||
-D P_LORA_RESET=14 ; Reset pin |
|||
-D P_LORA_SCLK=5 ; SPI clock |
|||
-D P_LORA_MISO=19 ; SPI MISO |
|||
-D P_LORA_MOSI=27 ; SPI MOSI |
|||
-D P_LORA_TX_LED=2 ; LED pin for TX indication |
|||
-D PIN_VBAT_READ=35 ; Battery voltage reading (analog pin) |
|||
-D PIN_USER_BTN=0 |
|||
-D RADIO_CLASS=CustomSX1276 |
|||
-D ARDUINO_LOOP_STACK_SIZE=16384 |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D WRAPPER_CLASS=CustomSX1276Wrapper |
|||
-D LORA_TX_POWER=20 |
|||
lib_deps = |
|||
${esp32_base.lib_deps} |
|||
adafruit/Adafruit SSD1306 @ ^2.5.13 |
|||
|
|||
; === LILYGO T-LoRa V2.1-1.6 with SX1276 environments === |
|||
[env:LilyGo_TLora_V2_1_1_6_Repeater] |
|||
extends = LilyGo_TLora_V2_1_1_6 |
|||
build_src_filter = ${LilyGo_TLora_V2_1_1_6.build_src_filter} |
|||
+<helpers/ui/*.cpp> |
|||
+<../examples/simple_repeater> |
|||
build_flags = |
|||
${LilyGo_TLora_V2_1_1_6.build_flags} |
|||
-D ADVERT_NAME='"TLora-V2.1-1.6 Repeater"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
; -D CORE_DEBUG_LEVEL=3 |
|||
|
|||
[env:LilyGo_TLora_V2_1_1_6_terminal_chat] |
|||
extends = LilyGo_TLora_V2_1_1_6 |
|||
build_flags = |
|||
${LilyGo_TLora_V2_1_1_6.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${LilyGo_TLora_V2_1_1_6.build_src_filter} |
|||
+<helpers/ui/*.cpp> |
|||
+<../examples/simple_repeater> |
|||
lib_deps = |
|||
${LilyGo_TLora_V2_1_1_6.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
|
|||
[env:LilyGo_TLora_V2_1_1_6_companion_radio_usb] |
|||
extends = LilyGo_TLora_V2_1_1_6 |
|||
build_flags = |
|||
${LilyGo_TLora_V2_1_1_6.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
; -D ENABLE_PRIVATE_KEY_IMPORT=1 |
|||
; -D ENABLE_PRIVATE_KEY_EXPORT=1 |
|||
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1 |
|||
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1 |
|||
build_src_filter = ${LilyGo_TLora_V2_1_1_6.build_src_filter} |
|||
+<helpers/ui/*.cpp> |
|||
+<../examples/companion_radio> |
|||
lib_deps = |
|||
${LilyGo_TLora_V2_1_1_6.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
|
|||
[env:LilyGo_TLora_V2_1_1_6_companion_radio_ble] |
|||
extends = LilyGo_TLora_V2_1_1_6 |
|||
build_flags = |
|||
${LilyGo_TLora_V2_1_1_6.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
-D BLE_PIN_CODE=123456 |
|||
; -D BLE_DEBUG_LOGGING=1 |
|||
; -D ENABLE_PRIVATE_KEY_IMPORT=1 |
|||
; -D ENABLE_PRIVATE_KEY_EXPORT=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${LilyGo_TLora_V2_1_1_6.build_src_filter} |
|||
+<helpers/esp32/*.cpp> |
|||
+<helpers/ui/*.cpp> |
|||
+<../examples/companion_radio> |
|||
lib_deps = |
|||
${LilyGo_TLora_V2_1_1_6.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
|
|||
[env:LilyGo_TLora_V2_1_1_6_room_server] |
|||
extends = LilyGo_TLora_V2_1_1_6 |
|||
build_src_filter = ${LilyGo_TLora_V2_1_1_6.build_src_filter} |
|||
+<helpers/ui/*.cpp> |
|||
+<../examples/simple_room_server> |
|||
build_flags = |
|||
${LilyGo_TLora_V2_1_1_6.build_flags} |
|||
-D ADVERT_NAME='"TLora-V2.1-1.6 Room"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
-D ROOM_PASSWORD='"hello"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
@ -0,0 +1,173 @@ |
|||
[faketec] |
|||
extends = nrf52840_base |
|||
board = promicro_nrf52840 |
|||
build_src_filter = ${nrf52840_base.build_src_filter} +<helpers/nrf52/faketecBoard.cpp> |
|||
build_flags = ${nrf52840_base.build_flags} |
|||
-D FAKETEC |
|||
-D RADIO_CLASS=CustomSX1262 |
|||
-D WRAPPER_CLASS=CustomSX1262Wrapper |
|||
-D LORA_TX_POWER=22 |
|||
-D SX126X_CURRENT_LIMIT=130 |
|||
-D SX126X_RX_BOOSTED_GAIN=1 |
|||
|
|||
[env:Faketec_Repeater] |
|||
extends = faketec |
|||
build_src_filter = ${faketec.build_src_filter} +<../examples/simple_repeater/main.cpp> |
|||
build_flags = |
|||
${faketec.build_flags} |
|||
-D ADVERT_NAME="\"Faketec Repeater\"" |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD="\"password\"" |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
lib_deps = |
|||
${faketec.lib_deps} |
|||
adafruit/RTClib @ ^2.1.3 |
|||
|
|||
[env:Faketec_room_server] |
|||
extends = faketec |
|||
build_src_filter = ${faketec.build_src_filter} +<../examples/simple_room_server/main.cpp> |
|||
build_flags = |
|||
${faketec.build_flags} |
|||
-D ADVERT_NAME="\"Test Room\"" |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD="\"password\"" |
|||
-D ROOM_PASSWORD="\"hello\"" |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
lib_deps = |
|||
${faketec.lib_deps} |
|||
adafruit/RTClib @ ^2.1.3 |
|||
|
|||
[env:Faketec_terminal_chat] |
|||
extends = faketec |
|||
build_flags = |
|||
${faketec.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${faketec.build_src_filter} +<../examples/simple_secure_chat/main.cpp> |
|||
lib_deps = |
|||
${faketec.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
adafruit/RTClib @ ^2.1.3 |
|||
|
|||
[env:Faketec_companion_radio_usb] |
|||
extends = faketec |
|||
build_flags = |
|||
${faketec.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1 |
|||
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1 |
|||
build_src_filter = ${faketec.build_src_filter} +<../examples/companion_radio/main.cpp> |
|||
lib_deps = |
|||
${faketec.lib_deps} |
|||
adafruit/RTClib @ ^2.1.3 |
|||
densaugeo/base64 @ ~1.4.0 |
|||
|
|||
[env:Faketec_companion_radio_ble] |
|||
extends = faketec |
|||
build_flags = |
|||
${faketec.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
-D BLE_PIN_CODE=123456 |
|||
-D BLE_DEBUG_LOGGING=1 |
|||
-D ENABLE_PRIVATE_KEY_EXPORT=1 |
|||
-D ENABLE_PRIVATE_KEY_IMPORT=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${faketec.build_src_filter} +<helpers/nrf52/SerialBLEInterface.cpp> +<../examples/companion_radio/main.cpp> |
|||
lib_deps = |
|||
${faketec.lib_deps} |
|||
adafruit/RTClib @ ^2.1.3 |
|||
densaugeo/base64 @ ~1.4.0 |
|||
|
|||
[ProMicroLLCC68] |
|||
extends = nrf52840_base |
|||
board = promicro_nrf52840 |
|||
build_src_filter = ${nrf52840_base.build_src_filter} +<helpers/nrf52/faketecBoard.cpp> |
|||
build_flags = ${nrf52840_base.build_flags} |
|||
-D FAKETEC |
|||
-D RADIO_CLASS=CustomLLCC68 |
|||
-D WRAPPER_CLASS=CustomLLCC68Wrapper |
|||
-D LORA_TX_POWER=22 |
|||
-D SX126X_CURRENT_LIMIT=130 |
|||
-D SX126X_RX_BOOSTED_GAIN=1 |
|||
|
|||
[env:ProMicroLLCC68_Repeater] |
|||
extends = ProMicroLLCC68 |
|||
build_src_filter = ${ProMicroLLCC68.build_src_filter} +<../examples/simple_repeater/main.cpp> |
|||
build_flags = |
|||
${ProMicroLLCC68.build_flags} |
|||
-D ADVERT_NAME="\"ProMicroLLCC68 Repeater\"" |
|||
-D ADMIN_PASSWORD="\"password\"" |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
lib_deps = |
|||
${ProMicroLLCC68.lib_deps} |
|||
adafruit/RTClib @ ^2.1.3 |
|||
|
|||
[env:ProMicroLLCC68_room_server] |
|||
extends = ProMicroLLCC68 |
|||
build_src_filter = ${ProMicroLLCC68.build_src_filter} +<../examples/simple_room_server/main.cpp> |
|||
build_flags = |
|||
${ProMicroLLCC68.build_flags} |
|||
-D ADVERT_NAME="\"ProMicroLLCC68 Room\"" |
|||
-D ADMIN_PASSWORD="\"password\"" |
|||
-D ROOM_PASSWORD="\"hello\"" |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
lib_deps = |
|||
${ProMicroLLCC68.lib_deps} |
|||
adafruit/RTClib @ ^2.1.3 |
|||
|
|||
[env:ProMicroLLCC68_terminal_chat] |
|||
extends = ProMicroLLCC68 |
|||
build_flags = |
|||
${ProMicroLLCC68.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${ProMicroLLCC68.build_src_filter} +<../examples/simple_secure_chat/main.cpp> |
|||
lib_deps = |
|||
${ProMicroLLCC68.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
adafruit/RTClib @ ^2.1.3 |
|||
|
|||
[env:ProMicroLLCC68_companion_radio_usb] |
|||
extends = ProMicroLLCC68 |
|||
build_flags = |
|||
${ProMicroLLCC68.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1 |
|||
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1 |
|||
build_src_filter = ${ProMicroLLCC68.build_src_filter} +<../examples/companion_radio/main.cpp> |
|||
lib_deps = |
|||
${ProMicroLLCC68.lib_deps} |
|||
adafruit/RTClib @ ^2.1.3 |
|||
densaugeo/base64 @ ~1.4.0 |
|||
|
|||
[env:ProMicroLLCC68_companion_radio_ble] |
|||
extends = ProMicroLLCC68 |
|||
build_flags = |
|||
${ProMicroLLCC68.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
-D BLE_PIN_CODE=123456 |
|||
-D BLE_DEBUG_LOGGING=1 |
|||
-D ENABLE_PRIVATE_KEY_EXPORT=1 |
|||
-D ENABLE_PRIVATE_KEY_IMPORT=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${ProMicroLLCC68.build_src_filter} +<helpers/nrf52/SerialBLEInterface.cpp> +<../examples/companion_radio/main.cpp> |
|||
lib_deps = |
|||
${ProMicroLLCC68.lib_deps} |
|||
adafruit/RTClib @ ^2.1.3 |
|||
densaugeo/base64 @ ~1.4.0 |
|||
@ -0,0 +1,102 @@ |
|||
[rak4631] |
|||
extends = nrf52840_base |
|||
platform = https://github.com/maxgerhardt/platform-nordicnrf52.git#rak |
|||
board = wiscore_rak4631 |
|||
board_check = true |
|||
build_flags = ${nrf52840_base.build_flags} |
|||
-D RAK_4631 |
|||
-D PIN_USER_BTN=9 |
|||
-D RADIO_CLASS=CustomSX1262 |
|||
-D WRAPPER_CLASS=CustomSX1262Wrapper |
|||
-D LORA_TX_POWER=22 |
|||
-D SX126X_CURRENT_LIMIT=130 |
|||
-D SX126X_RX_BOOSTED_GAIN=1 |
|||
build_src_filter = ${nrf52840_base.build_src_filter} |
|||
+<helpers/nrf52/*.cpp> |
|||
lib_deps = |
|||
${nrf52840_base.lib_deps} |
|||
adafruit/Adafruit SSD1306 @ ^2.5.13 |
|||
|
|||
[env:RAK_4631_Repeater] |
|||
extends = rak4631 |
|||
build_flags = |
|||
${rak4631.build_flags} |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D ADVERT_NAME='"RAK4631 Repeater"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${rak4631.build_src_filter} |
|||
+<helpers/ui/*.cpp> |
|||
+<../examples/simple_repeater> |
|||
|
|||
[env:RAK_4631_room_server] |
|||
extends = rak4631 |
|||
build_flags = |
|||
${rak4631.build_flags} |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D ADVERT_NAME='"Test Room"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
-D ROOM_PASSWORD='"hello"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${rak4631.build_src_filter} |
|||
+<helpers/ui/*.cpp> |
|||
+<../examples/simple_room_server> |
|||
|
|||
[env:RAK_4631_companion_radio_usb] |
|||
extends = rak4631 |
|||
build_flags = |
|||
${rak4631.build_flags} |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
; -D ENABLE_PRIVATE_KEY_IMPORT=1 |
|||
; -D ENABLE_PRIVATE_KEY_EXPORT=1 |
|||
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1 |
|||
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1 |
|||
build_src_filter = ${rak4631.build_src_filter} |
|||
+<helpers/ui/*.cpp> |
|||
+<../examples/companion_radio> |
|||
lib_deps = |
|||
${rak4631.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
|
|||
[env:RAK_4631_companion_radio_ble] |
|||
extends = rak4631 |
|||
build_flags = |
|||
${rak4631.build_flags} |
|||
-D DISPLAY_CLASS=SSD1306Display |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
-D BLE_PIN_CODE=123456 |
|||
-D BLE_DEBUG_LOGGING=1 |
|||
; -D ENABLE_PRIVATE_KEY_IMPORT=1 |
|||
; -D ENABLE_PRIVATE_KEY_EXPORT=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${rak4631.build_src_filter} |
|||
+<helpers/ui/*.cpp> |
|||
+<helpers/nrf52/*.cpp> |
|||
+<../examples/companion_radio> |
|||
lib_deps = |
|||
${rak4631.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
|
|||
[env:RAK_4631_terminal_chat] |
|||
extends = rak4631 |
|||
build_flags = |
|||
${rak4631.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=1 |
|||
-D MESH_PACKET_LOGGING=1 |
|||
-D MESH_DEBUG=1 |
|||
build_src_filter = ${rak4631.build_src_filter} |
|||
+<../examples/simple_secure_chat/main.cpp> |
|||
lib_deps = |
|||
${rak4631.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
@ -0,0 +1,49 @@ |
|||
[Station_G2] |
|||
extends = esp32_base |
|||
board = station-g2 |
|||
build_flags = |
|||
${esp32_base.build_flags} |
|||
-D STATION_G2 |
|||
-D RADIO_CLASS=CustomSX1262 |
|||
-D WRAPPER_CLASS=CustomSX1262Wrapper |
|||
-D LORA_TX_POWER=7 |
|||
; -D P_LORA_TX_LED=35 |
|||
; -D PIN_BOARD_SDA=5 |
|||
; -D PIN_BOARD_SCL=6 |
|||
-D PIN_USER_BTN=0 |
|||
-D SX126X_DIO2_AS_RF_SWITCH=true |
|||
-D SX126X_DIO3_TCXO_VOLTAGE=1.8 |
|||
-D SX126X_CURRENT_LIMIT=130.0f ; for best TX power! |
|||
; -D SX126X_RX_BOOSTED_GAIN=1 - DO NOT ENABLE THIS! |
|||
; https://wiki.uniteng.com/en/meshtastic/station-g2#impact-of-lora-node-dense-areashigh-noise-environments-on-rf-performance |
|||
|
|||
build_src_filter = ${esp32_base.build_src_filter} |
|||
lib_deps = |
|||
${esp32_base.lib_deps} |
|||
|
|||
[env:Station_G2_repeater] |
|||
extends = Station_G2 |
|||
build_flags = |
|||
${Station_G2.build_flags} |
|||
-D ADVERT_NAME='"Station G2 Repeater"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
-D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${Station_G2.build_src_filter} |
|||
+<../examples/simple_repeater> |
|||
|
|||
[env:Station_G2_room_server] |
|||
extends = Station_G2 |
|||
build_src_filter = ${Station_G2.build_src_filter} |
|||
+<../examples/simple_room_server> |
|||
build_flags = |
|||
${Station_G2.build_flags} |
|||
-D ADVERT_NAME='"Station G2 Room"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
-D ROOM_PASSWORD='"hello"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
@ -0,0 +1,51 @@ |
|||
; ----------------- NRF52 T1000e--------------------- |
|||
[nrf52840_t1000e] |
|||
extends = nrf52_base |
|||
platform_packages = framework-arduinoadafruitnrf52 |
|||
build_flags = ${nrf52_base.build_flags} |
|||
-I src/helpers/nrf52 |
|||
-I lib/nrf52/s140_nrf52_7.3.0_API/include |
|||
-I lib/nrf52/s140_nrf52_7.3.0_API/include/nrf52 |
|||
lib_ignore = |
|||
BluetoothOTA |
|||
lvgl |
|||
lib5b4 |
|||
lib_deps = |
|||
${nrf52_base.lib_deps} |
|||
rweather/Crypto @ ^0.4.0 |
|||
|
|||
[t1000-e] |
|||
extends = nrf52840_t1000e |
|||
board = tracker-t1000-e |
|||
board_build.ldscript = boards/nrf52840_s140_v7.ld |
|||
build_flags = ${nrf52840_t1000e.build_flags} |
|||
-Ivariants/t1000-e |
|||
-D T1000_E |
|||
-D PIN_USER_BTN=6 |
|||
-D USER_BTN_PRESSED=HIGH |
|||
-D PIN_STATUS_LED=24 |
|||
-D RADIO_CLASS=CustomLR1110 |
|||
-D WRAPPER_CLASS=CustomLR1110Wrapper |
|||
-D MAX_LORA_TX_POWER=22 |
|||
build_src_filter = ${nrf52840_t1000e.build_src_filter} |
|||
+<helpers/*.cpp> |
|||
+<helpers/nrf52/T1000eBoard.cpp> |
|||
+<../variants/t1000-e> |
|||
debug_tool = jlink |
|||
upload_protocol = nrfutil |
|||
|
|||
[env:t1000e_companion_radio_ble] |
|||
extends = t1000-e |
|||
build_flags = ${t1000-e.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
-D BLE_PIN_CODE=123456 |
|||
-D BLE_DEBUG_LOGGING=1 |
|||
-D MESH_PACKET_LOGGING=1 |
|||
-D MESH_DEBUG=1 |
|||
-D HAS_UI |
|||
build_src_filter = ${t1000-e.build_src_filter} |
|||
+<helpers/nrf52/SerialBLEInterface.cpp> |
|||
+<../examples/companion_radio/*.cpp> |
|||
lib_deps = ${t1000-e.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
@ -0,0 +1,76 @@ |
|||
[nrf52840_t114] |
|||
extends = nrf52_base |
|||
platform_packages = framework-arduinoadafruitnrf52 |
|||
build_flags = ${nrf52_base.build_flags} |
|||
-I src/helpers/nrf52 |
|||
-I lib/nrf52/s140_nrf52_6.1.1_API/include |
|||
-I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52 |
|||
lib_deps = |
|||
${nrf52_base.lib_deps} |
|||
rweather/Crypto @ ^0.4.0 |
|||
|
|||
[Heltec_t114] |
|||
extends = nrf52840_t114 |
|||
board = heltec_t114 |
|||
board_build.ldscript = boards/nrf52840_s140_v6.ld |
|||
build_flags = ${nrf52840_t114.build_flags} |
|||
-Ivariants/t114 |
|||
-DHELTEC_T114 |
|||
-D P_LORA_TX_LED=35 |
|||
-D RADIO_CLASS=CustomSX1262 |
|||
-D WRAPPER_CLASS=CustomSX1262Wrapper |
|||
-D LORA_TX_POWER=22 |
|||
-D SX126X_CURRENT_LIMIT=130 |
|||
-D SX126X_RX_BOOSTED_GAIN=1 |
|||
build_src_filter = ${nrf52840_t114.build_src_filter} |
|||
+<helpers/*.cpp> |
|||
+<helpers/nrf52/T114Board.cpp> |
|||
+<../variants/t114> |
|||
debug_tool = jlink |
|||
upload_protocol = nrfutil |
|||
|
|||
[env:Heltec_t114_repeater] |
|||
extends = Heltec_t114 |
|||
build_src_filter = ${Heltec_t114.build_src_filter} |
|||
+<../examples/simple_repeater/main.cpp> |
|||
build_flags = |
|||
${Heltec_t114.build_flags} |
|||
-D ADVERT_NAME='"Heltec_T114 Repeater"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
|
|||
[env:Heltec_t114_room_server] |
|||
extends = Heltec_t114 |
|||
build_src_filter = ${Heltec_t114.build_src_filter} |
|||
+<../examples/simple_room_server> |
|||
build_flags = |
|||
${Heltec_t114.build_flags} |
|||
-D ADVERT_NAME='"Heltec_T114 Room"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
-D ROOM_PASSWORD='"hello"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
|
|||
[env:Heltec_t114_companion_radio_ble] |
|||
extends = Heltec_t114 |
|||
build_flags = |
|||
${Heltec_t114.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
-D BLE_PIN_CODE=123456 |
|||
-D BLE_DEBUG_LOGGING=1 |
|||
; -D ENABLE_PRIVATE_KEY_IMPORT=1 |
|||
; -D ENABLE_PRIVATE_KEY_EXPORT=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${Heltec_t114.build_src_filter} |
|||
+<helpers/nrf52/*.cpp> |
|||
+<../examples/companion_radio/main.cpp> |
|||
lib_deps = |
|||
${Heltec_t114.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
@ -0,0 +1,72 @@ |
|||
[nrf52840_techo] |
|||
extends = nrf52_base |
|||
platform_packages = framework-arduinoadafruitnrf52 |
|||
build_flags = ${nrf52_base.build_flags} |
|||
-I src/helpers/nrf52 |
|||
-I lib/nrf52/s140_nrf52_6.1.1_API/include |
|||
-I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52 |
|||
lib_deps = |
|||
${nrf52_base.lib_deps} |
|||
rweather/Crypto @ ^0.4.0 |
|||
|
|||
[LilyGo_Techo] |
|||
extends = nrf52840_techo |
|||
board = t-echo |
|||
board_build.ldscript = boards/nrf52840_s140_v6.ld |
|||
build_flags = ${nrf52840_techo.build_flags} |
|||
-Ivariants/techo |
|||
-DLILYGO_TECHO |
|||
-D RADIO_CLASS=CustomSX1262 |
|||
-D WRAPPER_CLASS=CustomSX1262Wrapper |
|||
-D LORA_TX_POWER=22 |
|||
-D SX126X_CURRENT_LIMIT=130 |
|||
-D SX126X_RX_BOOSTED_GAIN=1 |
|||
build_src_filter = ${nrf52840_techo.build_src_filter} |
|||
+<helpers/*.cpp> |
|||
+<helpers/nrf52/TechoBoard.cpp> |
|||
+<../variants/techo> |
|||
debug_tool = jlink |
|||
upload_protocol = nrfutil |
|||
|
|||
[env:LilyGo_T-Echo_repeater] |
|||
extends = LilyGo_Techo |
|||
build_src_filter = ${LilyGo_Techo.build_src_filter} +<../examples/simple_repeater/main.cpp> |
|||
build_flags = |
|||
${LilyGo_Techo.build_flags} |
|||
-D ADVERT_NAME='"T-Echo Repeater"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
|
|||
[env:LilyGo_T-Echo_room_server] |
|||
extends = LilyGo_Techo |
|||
build_src_filter = ${LilyGo_Techo.build_src_filter} +<../examples/simple_room_server/main.cpp> |
|||
build_flags = |
|||
${LilyGo_Techo.build_flags} |
|||
-D ADVERT_NAME='"T-Echo Room"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
|
|||
[env:LilyGo_T-Echo_companion_radio_ble] |
|||
extends = LilyGo_Techo |
|||
build_flags = |
|||
${LilyGo_Techo.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
-D BLE_PIN_CODE=123456 |
|||
-D BLE_DEBUG_LOGGING=1 |
|||
; -D ENABLE_PRIVATE_KEY_IMPORT=1 |
|||
; -D ENABLE_PRIVATE_KEY_EXPORT=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${LilyGo_Techo.build_src_filter} |
|||
+<helpers/nrf52/*.cpp> |
|||
+<../examples/companion_radio/main.cpp> |
|||
lib_deps = |
|||
${LilyGo_Techo.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
@ -0,0 +1,50 @@ |
|||
[Xiao_esp32_C3] |
|||
extends = esp32_base |
|||
board = seeed_xiao_esp32c3 |
|||
build_flags = |
|||
${esp32_base.build_flags} |
|||
-D LORA_TX_BOOST_PIN=D3 |
|||
-D P_LORA_TX_LED=D5 |
|||
-D PIN_VBAT_READ=D0 |
|||
-D P_LORA_DIO_1=D2 |
|||
-D P_LORA_NSS=D4 |
|||
-D P_LORA_RESET=RADIOLIB_NC |
|||
-D P_LORA_BUSY=D1 |
|||
-D PIN_BOARD_SDA=D6 |
|||
-D PIN_BOARD_SCL=D7 |
|||
-D SX126X_DIO2_AS_RF_SWITCH=true |
|||
-D SX126X_DIO3_TCXO_VOLTAGE=1.8 |
|||
-D SX126X_CURRENT_LIMIT=130.0f ; for best TX power! |
|||
|
|||
[env:Xiao_C3_Repeater_sx1262] |
|||
extends = Xiao_esp32_C3 |
|||
build_src_filter = ${Xiao_esp32_C3.build_src_filter} |
|||
+<../examples/simple_repeater/main.cpp> |
|||
build_flags = |
|||
${Xiao_esp32_C3.build_flags} |
|||
-D RADIO_CLASS=CustomSX1262 |
|||
-D WRAPPER_CLASS=CustomSX1262Wrapper |
|||
-D SX126X_RX_BOOSTED_GAIN=1 |
|||
-D LORA_TX_POWER=22 |
|||
-D ADVERT_NAME='"Xiao Repeater"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
|
|||
[env:Xiao_C3_Repeater_sx1268] |
|||
extends = Xiao_esp32_C3 |
|||
build_src_filter = ${Xiao_esp32_C3.build_src_filter} |
|||
+<../examples/simple_repeater/main.cpp> |
|||
build_flags = |
|||
${Xiao_esp32_C3.build_flags} |
|||
-D RADIO_CLASS=CustomSX1268 |
|||
-D WRAPPER_CLASS=CustomSX1268Wrapper |
|||
-D LORA_TX_POWER=22 |
|||
-D ADVERT_NAME='"Xiao Repeater"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
@ -0,0 +1,67 @@ |
|||
[Xiao_S3_WIO] |
|||
extends = esp32_base |
|||
board = seeed_xiao_esp32s3 |
|||
board_check = true |
|||
board_build.mcu = esp32s3 |
|||
build_flags = ${esp32_base.build_flags} |
|||
-D SEEED_XIAO_S3 |
|||
-D P_LORA_DIO_1=39 |
|||
-D P_LORA_NSS=41 |
|||
-D P_LORA_RESET=42 ; RADIOLIB_NC |
|||
-D P_LORA_BUSY=40 ; DIO2 = 38 |
|||
-D P_LORA_SCLK=7 |
|||
-D P_LORA_MISO=8 |
|||
-D P_LORA_MOSI=9 |
|||
-D SX126X_DIO2_AS_RF_SWITCH=true |
|||
-D SX126X_DIO3_TCXO_VOLTAGE=1.8 |
|||
-D SX126X_CURRENT_LIMIT=130 |
|||
-D RADIO_CLASS=CustomSX1262 |
|||
-D WRAPPER_CLASS=CustomSX1262Wrapper |
|||
-D LORA_TX_POWER=22 |
|||
-D SX126X_RX_BOOSTED_GAIN=1 |
|||
|
|||
[env:Xiao_S3_WIO_Repeater] |
|||
extends = Xiao_S3_WIO |
|||
build_src_filter = ${Xiao_S3_WIO.build_src_filter} |
|||
+<../examples/simple_repeater/main.cpp> |
|||
build_flags = |
|||
${Xiao_S3_WIO.build_flags} |
|||
-D ADVERT_NAME='"XiaoS3 Repeater"' |
|||
-D ADVERT_LAT=-37.0 |
|||
-D ADVERT_LON=145.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
|
|||
[env:Xiao_S3_WIO_terminal_chat] |
|||
extends = Xiao_S3_WIO |
|||
build_flags = |
|||
${Xiao_S3_WIO.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${Xiao_S3_WIO.build_src_filter} |
|||
+<../examples/simple_secure_chat/main.cpp> |
|||
lib_deps = |
|||
${Xiao_S3_WIO.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
|
|||
[env:Xiao_S3_WIO_companion_radio_ble] |
|||
extends = Xiao_S3_WIO |
|||
build_flags = |
|||
${Xiao_S3_WIO.build_flags} |
|||
-D MAX_CONTACTS=100 |
|||
-D MAX_GROUP_CHANNELS=8 |
|||
-D BLE_PIN_CODE=123456 |
|||
; -D BLE_DEBUG_LOGGING=1 |
|||
; -D ENABLE_PRIVATE_KEY_IMPORT=1 |
|||
; -D ENABLE_PRIVATE_KEY_EXPORT=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${Xiao_S3_WIO.build_src_filter} |
|||
+<helpers/esp32/*.cpp> |
|||
+<../examples/companion_radio/main.cpp> |
|||
lib_deps = |
|||
${Xiao_S3_WIO.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
Loading…
Reference in new issue