Merge pull request #812 from khudson/source-cleanup

Ikoka Stick: Naming Convention, LED behavior, device strings

variants/ikoka_stick_nrf/ikoka_stick_nrf_board.cpp → variants/ikoka_stick_nrf/IkokaStickNRFBoard.cpp

@@ -1,28 +1,26 @@
 #ifdef XIAO_NRF52
 
 #include <Arduino.h>
-#include "ikoka_stick_nrf_board.h"
+#include "IkokaStickNRFBoard.h"
 
 #include <bluefruit.h>
 #include <Wire.h>
 
 static BLEDfu bledfu;
 
-static void connect_callback(uint16_t conn_handle)
-{
+static void connect_callback(uint16_t conn_handle) {
   (void)conn_handle;
   MESH_DEBUG_PRINTLN("BLE client connected");
 }
 
-static void disconnect_callback(uint16_t conn_handle, uint8_t reason)
-{
+static void disconnect_callback(uint16_t conn_handle, uint8_t reason) {
   (void)conn_handle;
   (void)reason;
 
   MESH_DEBUG_PRINTLN("BLE client disconnected");
 }
 
-void ikoka_stick_nrf_board::begin() {
+void IkokaStickNRFBoard::begin() {
   // for future use, sub-classes SHOULD call this from their begin()
   startup_reason = BD_STARTUP_NORMAL;
 
@@ -50,7 +48,7 @@ void ikoka_stick_nrf_board::begin() {
   delay(10);   // give sx1262 some time to power up
 }
 
-bool ikoka_stick_nrf_board::startOTAUpdate(const char* id, char reply[]) {
+bool IkokaStickNRFBoard::startOTAUpdate(const char *id, char reply[]) {
   // Config the peripheral connection with maximum bandwidth
   // more SRAM required by SoftDevice
   // Note: All config***() function must be called before begin()
@@ -91,9 +89,6 @@ bool ikoka_stick_nrf_board::startOTAUpdate(const char* id, char reply[]) {
 
   strcpy(reply, "OK - started");
   return true;
-
-
-  return false;
 }
 
 #endif

variants/ikoka_stick_nrf/ikoka_stick_nrf_board.h → variants/ikoka_stick_nrf/IkokaStickNRFBoard.h

@@ -5,7 +5,7 @@
 
 #ifdef XIAO_NRF52
 
-class ikoka_stick_nrf_board : public mesh::MainBoard {
+class IkokaStickNRFBoard : public mesh::MainBoard {
 protected:
   uint8_t startup_reason;
 
@@ -16,9 +16,17 @@ public:
 #if defined(P_LORA_TX_LED)
   void onBeforeTransmit() override {
     digitalWrite(P_LORA_TX_LED, LOW);   // turn TX LED on
+    #if defined(LED_BLUE)
+       // turn off that annoying blue LED before transmitting
+       digitalWrite(LED_BLUE, HIGH);
+    #endif
   }
   void onAfterTransmit() override {
     digitalWrite(P_LORA_TX_LED, HIGH);   // turn TX LED off
+    #if defined(LED_BLUE)
+       // do it after transmitting too, just in case
+       digitalWrite(LED_BLUE, HIGH);
+    #endif
   }
 #endif
 
@@ -38,15 +46,15 @@ public:
     return (adcvalue * ADC_MULTIPLIER * AREF_VOLTAGE) / 4.096;
   }
 
-  const char* getManufacturerName() const override {
-    return "Ikoka Stick (Xiao-nrf52)";
+  const char *getManufacturerName() const override {
+    return MANUFACTURER_STRING;
   }
 
   void reboot() override {
     NVIC_SystemReset();
   }
 
-  bool startOTAUpdate(const char* id, char reply[]) override;
+  bool startOTAUpdate(const char *id, char reply[]) override;
 };
 
 #endif

variants/ikoka_stick_nrf/platformio.ini

@@ -61,6 +61,7 @@ extends = ikoka_stick_nrf_baseboard
 ; No PA in this model, full 22dBm
 build_flags =
   ${ikoka_stick_nrf_baseboard.build_flags}
+  -D MANUFACTURER_STRING='"Ikoka Stick-E22-22dBm (Xiao_nrf52)"'
   -D LORA_TX_POWER=22
 build_src_filter = ${nrf52840_xiao.build_src_filter}
   +<helpers/*.cpp>
@@ -75,6 +76,7 @@ extends = ikoka_stick_nrf_baseboard
 ; cause distortion in the PA output. 20dBm in -> 30dBm out
 build_flags =
   ${ikoka_stick_nrf_baseboard.build_flags}
+  -D MANUFACTURER_STRING='"Ikoka Stick-E22-30dBm (Xiao_nrf52)"'
   -D LORA_TX_POWER=20
 build_src_filter = ${nrf52840_xiao.build_src_filter}
   +<helpers/*.cpp>
@@ -89,6 +91,7 @@ extends = ikoka_stick_nrf_baseboard
 ; to the rf amplifier frontend. 9dBm in -> 33dBm out
 build_flags =
   ${ikoka_stick_nrf_baseboard.build_flags}
+  -D MANUFACTURER_STRING='"Ikoka Stick-E22-33dBm (Xiao_nrf52)"'
   -D LORA_TX_POWER=9
 build_src_filter = ${nrf52840_xiao.build_src_filter}
   +<helpers/*.cpp>

variants/ikoka_stick_nrf/target.cpp

@@ -2,7 +2,7 @@
 #include "target.h"
 #include <helpers/ArduinoHelpers.h>
 
-ikoka_stick_nrf_board board;
+IkokaStickNRFBoard board;
 
 #ifdef DISPLAY_CLASS
   DISPLAY_CLASS display;

variants/ikoka_stick_nrf/target.h

@@ -3,7 +3,7 @@
 #define RADIOLIB_STATIC_ONLY 1
 #include <RadioLib.h>
 #include <helpers/radiolib/RadioLibWrappers.h>
-#include <ikoka_stick_nrf_board.h>
+#include <IkokaStickNRFBoard.h>
 #include <helpers/radiolib/CustomSX1262Wrapper.h>
 #include <helpers/AutoDiscoverRTCClock.h>
 #include <helpers/ArduinoHelpers.h>
@@ -16,7 +16,7 @@
   extern MomentaryButton user_btn;
 #endif
 
-extern ikoka_stick_nrf_board board;
+extern IkokaStickNRFBoard board;
 extern WRAPPER_CLASS radio_driver;
 extern AutoDiscoverRTCClock rtc_clock;
 extern EnvironmentSensorManager sensors;

variants/ikoka_stick_nrf/variant.h

@@ -35,7 +35,7 @@ extern "C"
 #define LED_GREEN               (13)
 #define LED_BLUE                (12)
 
-#define LED_STATE_ON            (1)     // State when LED is litted
+#define LED_STATE_ON            (0)     // State when LED is litted
 
 // Buttons
 #define PIN_BUTTON1             (PINS_COUNT)