new workaround

src/helpers/radiolib/CustomLR1110.h

@@ -10,74 +10,19 @@ class CustomLR1110 : public LR1110 {
   public:
     CustomLR1110(Module *mod) : LR1110(mod) { }
 
-    uint8_t shiftCount = 0;
-
-    int16_t standby() override {
-      // tx resets the shift, standby is called on tx completion
-      // this might not actually be what resets it, but it seems to work
-      // more investigation needed
-      this->shiftCount = 0;
-      return LR1110::standby();
-    }
-
     size_t getPacketLength(bool update) override {
       size_t len = LR1110::getPacketLength(update);
-      if (len == 0) {
+      if (len == 0 && getIrqStatus() & RADIOLIB_LR11X0_IRQ_HEADER_ERR) {
-        uint32_t irq = getIrqStatus();
+        // we've just recieved a corrupted packet
-        if (irq & RADIOLIB_LR11X0_IRQ_HEADER_ERR) {
+        // this may have triggered a bug causing subsequent packets to be shifted
-          MESH_DEBUG_PRINTLN("LR1110: got header err, assuming shift");
+        // call standby() to return radio to known-good state
-          this->shiftCount += 4; // uint8 will loop around to 0 at 256, perfect as rx buffer is 256 bytes
+        // recvRaw will call startReceive() to restart rx
-        } else {
+        MESH_DEBUG_PRINTLN("LR1110: got header err, calling standby()");
-          MESH_DEBUG_PRINTLN("LR1110: got zero-length packet without header err irq");
+        standby();
-        }
       }
       return len;
     }
 
-    int16_t readData(uint8_t *data, size_t len) override {
-      // check active modem
-      uint8_t modem = RADIOLIB_LR11X0_PACKET_TYPE_NONE;
-      int16_t state = getPacketType(&modem);
-      RADIOLIB_ASSERT(state);
-      if((modem != RADIOLIB_LR11X0_PACKET_TYPE_LORA) && 
-        (modem != RADIOLIB_LR11X0_PACKET_TYPE_GFSK)) {
-        return(RADIOLIB_ERR_WRONG_MODEM);
-      }
-
-      // check integrity CRC
-      uint32_t irq = getIrqStatus();
-      int16_t crcState = RADIOLIB_ERR_NONE;
-      // Report CRC mismatch when there's a payload CRC error, or a header error and no valid header (to avoid false alarm from previous packet)
-      if((irq & RADIOLIB_LR11X0_IRQ_CRC_ERR) || ((irq & RADIOLIB_LR11X0_IRQ_HEADER_ERR) && !(irq & RADIOLIB_LR11X0_IRQ_SYNC_WORD_HEADER_VALID))) {
-        crcState = RADIOLIB_ERR_CRC_MISMATCH;
-      }
-
-      // get packet length
-      // the offset is needed since LR11x0 seems to move the buffer base by 4 bytes on every packet
-      uint8_t offset = 0;
-      size_t length = LR1110::getPacketLength(true, &offset);
-      if((len != 0) && (len < length)) {
-        // user requested less data than we got, only return what was requested
-        length = len;
-      }
-
-      // read packet data
-      state = readBuffer8(data, length, (uint8_t)(offset + this->shiftCount));  // add shiftCount to offset - only change from radiolib
-      RADIOLIB_ASSERT(state);
-
-      // clear the Rx buffer
-      state = clearRxBuffer();
-      RADIOLIB_ASSERT(state);
-
-      // clear interrupt flags
-      state = clearIrqState(RADIOLIB_LR11X0_IRQ_ALL);
-
-      // check if CRC failed - this is done after reading data to give user the option to keep them
-      RADIOLIB_ASSERT(crcState);
-
-      return(state);
-    }
-
     RadioLibTime_t getTimeOnAir(size_t len) override {
   // calculate number of symbols
   float N_symbol = 0;