mirror of https://github.com/meshcore-dev/MeshCore
Quency-D
4 weeks ago
committed by
GitHub
GitHub
38 changed files with 1666 additions and 25 deletions
@ -0,0 +1,61 @@ |
|||||
|
{ |
||||
|
"build": { |
||||
|
"arduino": { |
||||
|
"ldscript": "nrf52840_s140_v6.ld" |
||||
|
}, |
||||
|
"core": "nRF5", |
||||
|
"cpu": "cortex-m4", |
||||
|
"extra_flags": "-DNRF52840_XXAA", |
||||
|
"f_cpu": "64000000L", |
||||
|
"hwids": [ |
||||
|
["0x239A","0x8029"], |
||||
|
["0x239A","0x0029"], |
||||
|
["0x239A","0x002A"], |
||||
|
["0x239A","0x802A"] |
||||
|
], |
||||
|
"usb_product": "HT-n5262T1", |
||||
|
"mcu": "nrf52840", |
||||
|
"variant": "heltec_t1", |
||||
|
"bsp": { |
||||
|
"name": "adafruit" |
||||
|
}, |
||||
|
"softdevice": { |
||||
|
"sd_flags": "-DS140", |
||||
|
"sd_name": "s140", |
||||
|
"sd_version": "6.1.1", |
||||
|
"sd_fwid": "0x00B6" |
||||
|
}, |
||||
|
"bootloader": { |
||||
|
"settings_addr": "0xFF000" |
||||
|
} |
||||
|
}, |
||||
|
"connectivity": [ |
||||
|
"bluetooth" |
||||
|
], |
||||
|
"debug": { |
||||
|
"jlink_device": "nRF52840_xxAA", |
||||
|
"svd_path": "nrf52840.svd", |
||||
|
"openocd_target": "nrf52.cfg" |
||||
|
}, |
||||
|
"frameworks": [ |
||||
|
"arduino" |
||||
|
], |
||||
|
"name": "Heltec Mesh Node T1 Board", |
||||
|
"upload": { |
||||
|
"maximum_ram_size": 235520, |
||||
|
"maximum_size": 815104, |
||||
|
"speed": 115200, |
||||
|
"protocol": "nrfutil", |
||||
|
"protocols": [ |
||||
|
"jlink", |
||||
|
"nrfjprog", |
||||
|
"nrfutil", |
||||
|
"stlink" |
||||
|
], |
||||
|
"use_1200bps_touch": true, |
||||
|
"require_upload_port": true, |
||||
|
"wait_for_upload_port": true |
||||
|
}, |
||||
|
"url": "https://heltec.org/", |
||||
|
"vendor": "Heltec" |
||||
|
} |
||||
@ -0,0 +1,64 @@ |
|||||
|
{ |
||||
|
"build": { |
||||
|
"arduino":{ |
||||
|
"ldscript": "nrf52840_s140_v6.ld" |
||||
|
}, |
||||
|
"core": "nRF5", |
||||
|
"cpu": "cortex-m4", |
||||
|
"extra_flags": "-DARDUINO_NRF52840_T_IMPULSE_PLUS -DNRF52840_XXAA", |
||||
|
"f_cpu": "64000000L", |
||||
|
"hwids": [ |
||||
|
[ |
||||
|
"0x239A", |
||||
|
"0x8029" |
||||
|
] |
||||
|
], |
||||
|
"usb_product": "T-Impulse-Plus-nRF52840", |
||||
|
"mcu": "nrf52840", |
||||
|
"variant": "t_impulse_plus_nrf52840", |
||||
|
"bsp": { |
||||
|
"name": "adafruit" |
||||
|
}, |
||||
|
"softdevice": { |
||||
|
"sd_flags": "-DS140", |
||||
|
"sd_name": "s140", |
||||
|
"sd_version": "6.1.1", |
||||
|
"sd_fwid": "0x00B6" |
||||
|
}, |
||||
|
"bootloader": { |
||||
|
"settings_addr": "0xFF000" |
||||
|
} |
||||
|
}, |
||||
|
"connectivity": [ |
||||
|
"bluetooth" |
||||
|
], |
||||
|
"debug": { |
||||
|
"jlink_device": "nRF52840_xxAA", |
||||
|
"onboard_tools": [ |
||||
|
"jlink" |
||||
|
], |
||||
|
"svd_path": "nrf52840.svd" |
||||
|
}, |
||||
|
"frameworks": [ |
||||
|
"arduino" |
||||
|
], |
||||
|
"name": "Lilygo T-Impulse-Plus-nRF52840", |
||||
|
"upload": { |
||||
|
"maximum_ram_size": 248832, |
||||
|
"maximum_size": 815104, |
||||
|
"require_upload_port": true, |
||||
|
"speed": 115200, |
||||
|
"protocol": "nrfutil", |
||||
|
"protocols": [ |
||||
|
"jlink", |
||||
|
"nrfjprog", |
||||
|
"stlink", |
||||
|
"cmsis-dap", |
||||
|
"blackmagic" |
||||
|
], |
||||
|
"use_1200bps_touch": true, |
||||
|
"wait_for_upload_port": true |
||||
|
}, |
||||
|
"url": "https://www.lilygo.cc/", |
||||
|
"vendor": "Lilygo" |
||||
|
} |
||||
@ -0,0 +1,43 @@ |
|||||
|
{ |
||||
|
"build": { |
||||
|
"arduino": { |
||||
|
"ldscript": "esp32s3_out.ld", |
||||
|
"memory_type": "qio_opi" |
||||
|
}, |
||||
|
"core": "esp32", |
||||
|
"extra_flags": [ |
||||
|
"-DBOARD_HAS_PSRAM", |
||||
|
"-DARDUINO_USB_CDC_ON_BOOT=1", |
||||
|
"-DARDUINO_USB_MODE=0", |
||||
|
"-DARDUINO_RUNNING_CORE=1", |
||||
|
"-DARDUINO_EVENT_RUNNING_CORE=0" |
||||
|
], |
||||
|
"f_cpu": "240000000L", |
||||
|
"f_flash": "80000000L", |
||||
|
"flash_mode": "qio", |
||||
|
"hwids": [["0x303A", "0x1001"]], |
||||
|
"mcu": "esp32s3", |
||||
|
"variant": "esp32s3" |
||||
|
}, |
||||
|
"connectivity": [ |
||||
|
"wifi" |
||||
|
], |
||||
|
"debug": { |
||||
|
"default_tool": "esp-builtin", |
||||
|
"onboard_tools": ["esp-builtin"], |
||||
|
"openocd_target": "esp32s3.cfg" |
||||
|
}, |
||||
|
"frameworks": ["arduino", "espidf"], |
||||
|
"name": "Station G3 ESP32", |
||||
|
"upload": { |
||||
|
"flash_size": "16MB", |
||||
|
"maximum_ram_size": 327680, |
||||
|
"maximum_size": 16777216, |
||||
|
"use_1200bps_touch": true, |
||||
|
"wait_for_upload_port": true, |
||||
|
"require_upload_port": true, |
||||
|
"speed": 921600 |
||||
|
}, |
||||
|
"url": "https://wiki.bqvoy.com/en/devkits/station-g3", |
||||
|
"vendor": "BQ Consulting" |
||||
|
} |
||||
@ -0,0 +1,135 @@ |
|||||
|
#include "T1Board.h" |
||||
|
|
||||
|
#include <Arduino.h> |
||||
|
#include <Wire.h> |
||||
|
|
||||
|
#ifdef NRF52_POWER_MANAGEMENT |
||||
|
const PowerMgtConfig power_config = { |
||||
|
.lpcomp_ain_channel = PWRMGT_LPCOMP_AIN, |
||||
|
.lpcomp_refsel = PWRMGT_LPCOMP_REFSEL, |
||||
|
.voltage_bootlock = PWRMGT_VOLTAGE_BOOTLOCK |
||||
|
}; |
||||
|
|
||||
|
void T1Board::initiateShutdown(uint8_t reason) { |
||||
|
variant_shutdown(); |
||||
|
|
||||
|
bool enable_lpcomp = (reason == SHUTDOWN_REASON_LOW_VOLTAGE || |
||||
|
reason == SHUTDOWN_REASON_BOOT_PROTECT); |
||||
|
pinMode(PIN_BAT_CTL, OUTPUT); |
||||
|
digitalWrite(PIN_BAT_CTL, enable_lpcomp ? ADC_CTRL_ENABLED : !ADC_CTRL_ENABLED); |
||||
|
|
||||
|
if (enable_lpcomp) { |
||||
|
configureVoltageWake(power_config.lpcomp_ain_channel, power_config.lpcomp_refsel); |
||||
|
} |
||||
|
|
||||
|
enterSystemOff(reason); |
||||
|
} |
||||
|
#endif |
||||
|
|
||||
|
void T1Board::begin() { |
||||
|
NRF52Board::begin(); |
||||
|
|
||||
|
#ifdef NRF52_POWER_MANAGEMENT |
||||
|
checkBootVoltage(&power_config); |
||||
|
#endif |
||||
|
|
||||
|
#if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL) |
||||
|
Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL); |
||||
|
#endif |
||||
|
Wire.begin(); |
||||
|
|
||||
|
pinMode(P_LORA_TX_LED, OUTPUT); |
||||
|
digitalWrite(P_LORA_TX_LED, !LED_STATE_ON); |
||||
|
|
||||
|
pinMode(PIN_GPS_EN, OUTPUT); |
||||
|
digitalWrite(PIN_GPS_EN, !PIN_GPS_EN_ACTIVE); |
||||
|
|
||||
|
pinMode(PIN_SENSOR_EN, OUTPUT); |
||||
|
digitalWrite(PIN_SENSOR_EN, PIN_SENSOR_EN_ACTIVE); |
||||
|
|
||||
|
pinMode(PIN_BUZZER, OUTPUT); |
||||
|
digitalWrite(PIN_BUZZER, LOW); |
||||
|
pinMode(PIN_BUZZER_VOLTAGE_MULTIPLIER_1, OUTPUT); |
||||
|
pinMode(PIN_BUZZER_VOLTAGE_MULTIPLIER_2, OUTPUT); |
||||
|
digitalWrite(PIN_BUZZER_VOLTAGE_MULTIPLIER_1, HIGH); |
||||
|
digitalWrite(PIN_BUZZER_VOLTAGE_MULTIPLIER_2, HIGH); |
||||
|
|
||||
|
periph_power.begin(); |
||||
|
delay(1); |
||||
|
} |
||||
|
|
||||
|
void T1Board::onBeforeTransmit() { |
||||
|
digitalWrite(P_LORA_TX_LED, LED_STATE_ON); |
||||
|
} |
||||
|
|
||||
|
void T1Board::onAfterTransmit() { |
||||
|
digitalWrite(P_LORA_TX_LED, !LED_STATE_ON); |
||||
|
} |
||||
|
|
||||
|
uint16_t T1Board::getBattMilliVolts() { |
||||
|
analogReadResolution(12); |
||||
|
analogReference(VBAT_AR_INTERNAL); |
||||
|
pinMode(PIN_VBAT_READ, INPUT); |
||||
|
pinMode(PIN_BAT_CTL, OUTPUT); |
||||
|
digitalWrite(PIN_BAT_CTL, ADC_CTRL_ENABLED); |
||||
|
|
||||
|
delay(10); |
||||
|
int adcvalue = analogRead(PIN_VBAT_READ); |
||||
|
digitalWrite(PIN_BAT_CTL, !ADC_CTRL_ENABLED); |
||||
|
|
||||
|
return (uint16_t)((float)adcvalue * MV_LSB * ADC_MULTIPLIER); |
||||
|
} |
||||
|
|
||||
|
void T1Board::variant_shutdown() { |
||||
|
nrf_gpio_cfg_default(PIN_TFT_CS); |
||||
|
nrf_gpio_cfg_default(PIN_TFT_DC); |
||||
|
nrf_gpio_cfg_default(PIN_TFT_SDA); |
||||
|
nrf_gpio_cfg_default(PIN_TFT_SCL); |
||||
|
nrf_gpio_cfg_default(PIN_TFT_RST); |
||||
|
nrf_gpio_cfg_default(PIN_TFT_LEDA_CTL); |
||||
|
nrf_gpio_cfg_default(PIN_TFT_VDD_CTL); |
||||
|
|
||||
|
nrf_gpio_cfg_default(PIN_WIRE_SDA); |
||||
|
nrf_gpio_cfg_default(PIN_WIRE_SCL); |
||||
|
|
||||
|
nrf_gpio_cfg_default(LORA_CS); |
||||
|
nrf_gpio_cfg_default(SX126X_DIO1); |
||||
|
nrf_gpio_cfg_default(SX126X_BUSY); |
||||
|
nrf_gpio_cfg_default(SX126X_RESET); |
||||
|
nrf_gpio_cfg_default(PIN_SPI_MISO); |
||||
|
nrf_gpio_cfg_default(PIN_SPI_MOSI); |
||||
|
nrf_gpio_cfg_default(PIN_SPI_SCK); |
||||
|
|
||||
|
nrf_gpio_cfg_default(PIN_SPI1_MOSI); |
||||
|
nrf_gpio_cfg_default(PIN_SPI1_SCK); |
||||
|
|
||||
|
nrf_gpio_cfg_default(PIN_GPS_RESET); |
||||
|
nrf_gpio_cfg_default(PIN_GPS_EN); |
||||
|
nrf_gpio_cfg_default(PIN_GPS_PPS); |
||||
|
nrf_gpio_cfg_default(PIN_GPS_RX); |
||||
|
nrf_gpio_cfg_default(PIN_GPS_TX); |
||||
|
|
||||
|
nrf_gpio_cfg_default(PIN_BUZZER_VOLTAGE_MULTIPLIER_1); |
||||
|
nrf_gpio_cfg_default(PIN_BUZZER_VOLTAGE_MULTIPLIER_2); |
||||
|
|
||||
|
pinMode(PIN_BUZZER, OUTPUT); |
||||
|
digitalWrite(PIN_BUZZER, LOW); |
||||
|
|
||||
|
pinMode(PIN_SENSOR_EN, OUTPUT); |
||||
|
digitalWrite(PIN_SENSOR_EN, !PIN_SENSOR_EN_ACTIVE); |
||||
|
|
||||
|
pinMode(PIN_LED1, OUTPUT); |
||||
|
digitalWrite(PIN_LED1, !LED_STATE_ON); |
||||
|
|
||||
|
pinMode(PIN_BAT_CTL, OUTPUT); |
||||
|
digitalWrite(PIN_BAT_CTL, !ADC_CTRL_ENABLED); |
||||
|
} |
||||
|
|
||||
|
void T1Board::powerOff() { |
||||
|
variant_shutdown(); |
||||
|
sd_power_system_off(); |
||||
|
} |
||||
|
|
||||
|
const char* T1Board::getManufacturerName() const { |
||||
|
return "Heltec T1"; |
||||
|
} |
||||
@ -0,0 +1,26 @@ |
|||||
|
#pragma once |
||||
|
|
||||
|
#include <Arduino.h> |
||||
|
#include <MeshCore.h> |
||||
|
#include <helpers/NRF52Board.h> |
||||
|
#include <helpers/RefCountedDigitalPin.h> |
||||
|
|
||||
|
class T1Board : public NRF52BoardDCDC { |
||||
|
protected: |
||||
|
#ifdef NRF52_POWER_MANAGEMENT |
||||
|
void initiateShutdown(uint8_t reason) override; |
||||
|
#endif |
||||
|
void variant_shutdown(); |
||||
|
|
||||
|
public: |
||||
|
RefCountedDigitalPin periph_power; |
||||
|
|
||||
|
T1Board() : periph_power(PIN_TFT_VDD_CTL, PIN_TFT_VDD_CTL_ACTIVE), NRF52Board("T1_OTA") {} |
||||
|
|
||||
|
void begin(); |
||||
|
void onBeforeTransmit() override; |
||||
|
void onAfterTransmit() override; |
||||
|
uint16_t getBattMilliVolts() override; |
||||
|
const char* getManufacturerName() const override; |
||||
|
void powerOff() override; |
||||
|
}; |
||||
@ -0,0 +1,108 @@ |
|||||
|
[Heltec_t1] |
||||
|
extends = nrf52_base |
||||
|
board = heltec_t1 |
||||
|
board_build.ldscript = boards/nrf52840_s140_v6.ld |
||||
|
build_flags = ${nrf52_base.build_flags} |
||||
|
${sensor_base.build_flags} |
||||
|
-I lib/nrf52/s140_nrf52_6.1.1_API/include |
||||
|
-I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52 |
||||
|
-I variants/heltec_t1 |
||||
|
-I src/helpers/ui |
||||
|
-D HELTEC_T1 |
||||
|
-D NRF52_POWER_MANAGEMENT |
||||
|
-D RADIO_CLASS=CustomSX1262 |
||||
|
-D WRAPPER_CLASS=CustomSX1262Wrapper |
||||
|
-D LORA_TX_POWER=22 |
||||
|
-D DISPLAY_CLASS=ST7735Display |
||||
|
build_src_filter = ${nrf52_base.build_src_filter} |
||||
|
+<helpers/*.cpp> |
||||
|
+<helpers/sensors> |
||||
|
+<../variants/heltec_t1> |
||||
|
+<helpers/ui/ST7735Display.cpp> |
||||
|
+<helpers/ui/MomentaryButton.cpp> |
||||
|
lib_deps = |
||||
|
${nrf52_base.lib_deps} |
||||
|
${sensor_base.lib_deps} |
||||
|
adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0 |
||||
|
debug_tool = jlink |
||||
|
upload_protocol = nrfutil |
||||
|
|
||||
|
[env:Heltec_t1_repeater] |
||||
|
extends = Heltec_t1 |
||||
|
build_src_filter = ${Heltec_t1.build_src_filter} |
||||
|
+<../examples/simple_repeater> |
||||
|
|
||||
|
build_flags = |
||||
|
${Heltec_t1.build_flags} |
||||
|
-D ADVERT_NAME='"Heltec_t1 Repeater"' |
||||
|
-D ADVERT_LAT=0.0 |
||||
|
-D ADVERT_LON=0.0 |
||||
|
-D ADMIN_PASSWORD='"password"' |
||||
|
-D MAX_NEIGHBOURS=50 |
||||
|
; -D MESH_PACKET_LOGGING=1 |
||||
|
; -D MESH_DEBUG=1 |
||||
|
|
||||
|
[env:Heltec_t1_room_server] |
||||
|
extends = Heltec_t1 |
||||
|
build_src_filter = ${Heltec_t1.build_src_filter} |
||||
|
+<../examples/simple_room_server> |
||||
|
build_flags = |
||||
|
${Heltec_t1.build_flags} |
||||
|
-D ADVERT_NAME='"Heltec_t1 Room"' |
||||
|
-D ADVERT_LAT=0.0 |
||||
|
-D ADVERT_LON=0.0 |
||||
|
-D ADMIN_PASSWORD='"password"' |
||||
|
-D ROOM_PASSWORD='"hello"' |
||||
|
; -D MESH_PACKET_LOGGING=1 |
||||
|
; -D MESH_DEBUG=1 |
||||
|
|
||||
|
[env:Heltec_t1_companion_radio_ble] |
||||
|
extends = Heltec_t1 |
||||
|
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld |
||||
|
board_upload.maximum_size = 712704 |
||||
|
build_flags = |
||||
|
${Heltec_t1.build_flags} |
||||
|
-I examples/companion_radio/ui-new |
||||
|
-D MAX_CONTACTS=350 |
||||
|
-D MAX_GROUP_CHANNELS=40 |
||||
|
-D BLE_PIN_CODE=123456 |
||||
|
-D ENV_INCLUDE_GPS=1 |
||||
|
; -D BLE_DEBUG_LOGGING=1 |
||||
|
-D OFFLINE_QUEUE_SIZE=256 |
||||
|
; -D MESH_PACKET_LOGGING=1 |
||||
|
; -D MESH_DEBUG=1 |
||||
|
build_src_filter = ${Heltec_t1.build_src_filter} |
||||
|
+<helpers/nrf52/SerialBLEInterface.cpp> |
||||
|
+<helpers/ui/buzzer.cpp> |
||||
|
+<../examples/companion_radio/*.cpp> |
||||
|
+<../examples/companion_radio/ui-new/*.cpp> |
||||
|
lib_deps = |
||||
|
${Heltec_t1.lib_deps} |
||||
|
densaugeo/base64 @ ~1.4.0 |
||||
|
end2endzone/NonBlockingRTTTL@^1.3.0 |
||||
|
|
||||
|
[env:Heltec_t1_companion_radio_usb] |
||||
|
extends = Heltec_t1 |
||||
|
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld |
||||
|
board_upload.maximum_size = 712704 |
||||
|
build_flags = |
||||
|
${Heltec_t1.build_flags} |
||||
|
-I examples/companion_radio/ui-new |
||||
|
-D MAX_CONTACTS=350 |
||||
|
-D MAX_GROUP_CHANNELS=40 |
||||
|
; -D MESH_PACKET_LOGGING=1 |
||||
|
; -D MESH_DEBUG=1 |
||||
|
build_src_filter = ${Heltec_t1.build_src_filter} |
||||
|
+<helpers/nrf52/*.cpp> |
||||
|
+<helpers/ui/buzzer.cpp> |
||||
|
+<../examples/companion_radio/*.cpp> |
||||
|
+<../examples/companion_radio/ui-new/*.cpp> |
||||
|
lib_deps = |
||||
|
${Heltec_t1.lib_deps} |
||||
|
densaugeo/base64 @ ~1.4.0 |
||||
|
end2endzone/NonBlockingRTTTL@^1.3.0 |
||||
|
|
||||
|
[env:Heltec_t1_kiss_modem] |
||||
|
extends = Heltec_t1 |
||||
|
build_src_filter = ${Heltec_t1.build_src_filter} |
||||
|
+<../examples/kiss_modem/> |
||||
@ -0,0 +1,48 @@ |
|||||
|
#include "target.h" |
||||
|
|
||||
|
#include <Arduino.h> |
||||
|
#include <helpers/ArduinoHelpers.h> |
||||
|
|
||||
|
#ifdef ENV_INCLUDE_GPS |
||||
|
#include <helpers/sensors/MicroNMEALocationProvider.h> |
||||
|
#endif |
||||
|
|
||||
|
T1Board board; |
||||
|
|
||||
|
#if defined(P_LORA_SCLK) |
||||
|
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI); |
||||
|
#else |
||||
|
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY); |
||||
|
#endif |
||||
|
|
||||
|
WRAPPER_CLASS radio_driver(radio, board); |
||||
|
|
||||
|
VolatileRTCClock fallback_clock; |
||||
|
AutoDiscoverRTCClock rtc_clock(fallback_clock); |
||||
|
|
||||
|
#if ENV_INCLUDE_GPS |
||||
|
MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock, GPS_RESET, GPS_EN, &board.periph_power); |
||||
|
EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea); |
||||
|
#else |
||||
|
EnvironmentSensorManager sensors; |
||||
|
#endif |
||||
|
|
||||
|
#ifdef DISPLAY_CLASS |
||||
|
DISPLAY_CLASS display(&board.periph_power); |
||||
|
MomentaryButton user_btn(PIN_USER_BTN, 1000, true); |
||||
|
#endif |
||||
|
|
||||
|
bool radio_init() { |
||||
|
rtc_clock.begin(Wire); |
||||
|
|
||||
|
#if defined(P_LORA_SCLK) |
||||
|
return radio.std_init(&SPI); |
||||
|
#else |
||||
|
return radio.std_init(); |
||||
|
#endif |
||||
|
} |
||||
|
|
||||
|
mesh::LocalIdentity radio_new_identity() { |
||||
|
RadioNoiseListener rng(radio); |
||||
|
return mesh::LocalIdentity(&rng); |
||||
|
} |
||||
@ -0,0 +1,30 @@ |
|||||
|
#pragma once |
||||
|
|
||||
|
#define RADIOLIB_STATIC_ONLY 1 |
||||
|
#include <RadioLib.h> |
||||
|
#include <T1Board.h> |
||||
|
#include <helpers/AutoDiscoverRTCClock.h> |
||||
|
#include <helpers/radiolib/CustomSX1262Wrapper.h> |
||||
|
#include <helpers/radiolib/RadioLibWrappers.h> |
||||
|
#include <helpers/sensors/EnvironmentSensorManager.h> |
||||
|
#include <helpers/sensors/LocationProvider.h> |
||||
|
|
||||
|
#ifdef DISPLAY_CLASS |
||||
|
#include <helpers/ui/MomentaryButton.h> |
||||
|
#include <helpers/ui/ST7735Display.h> |
||||
|
#else |
||||
|
#include "helpers/ui/NullDisplayDriver.h" |
||||
|
#endif |
||||
|
|
||||
|
extern T1Board board; |
||||
|
extern WRAPPER_CLASS radio_driver; |
||||
|
extern AutoDiscoverRTCClock rtc_clock; |
||||
|
extern EnvironmentSensorManager sensors; |
||||
|
|
||||
|
#ifdef DISPLAY_CLASS |
||||
|
extern DISPLAY_CLASS display; |
||||
|
extern MomentaryButton user_btn; |
||||
|
#endif |
||||
|
|
||||
|
bool radio_init(); |
||||
|
mesh::LocalIdentity radio_new_identity(); |
||||
@ -0,0 +1,15 @@ |
|||||
|
#include "variant.h" |
||||
|
#include "wiring_constants.h" |
||||
|
#include "wiring_digital.h" |
||||
|
|
||||
|
const uint32_t g_ADigitalPinMap[] = { |
||||
|
0xff, 0xff, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, |
||||
|
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, |
||||
|
27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, |
||||
|
40, 41, 42, 43, 44, 45, 46, 47 |
||||
|
}; |
||||
|
|
||||
|
void initVariant() |
||||
|
{ |
||||
|
pinMode(PIN_USER_BTN, INPUT); |
||||
|
} |
||||
@ -0,0 +1,169 @@ |
|||||
|
/*
|
||||
|
* Heltec Mesh Node T1 nRF52840 variant. |
||||
|
*/ |
||||
|
|
||||
|
#pragma once |
||||
|
|
||||
|
#include "WVariant.h" |
||||
|
|
||||
|
#define USE_LFXO |
||||
|
#define VARIANT_MCK (64000000ul) |
||||
|
|
||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||
|
// Number of pins
|
||||
|
|
||||
|
#define PINS_COUNT (48) |
||||
|
#define NUM_DIGITAL_PINS (48) |
||||
|
#define NUM_ANALOG_INPUTS (1) |
||||
|
#define NUM_ANALOG_OUTPUTS (0) |
||||
|
|
||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||
|
// Display
|
||||
|
|
||||
|
#define ST7735_CS (0 + 12) |
||||
|
#define ST7735_RS (0 + 22) |
||||
|
#define ST7735_SDA (0 + 24) |
||||
|
#define ST7735_SCK (32 + 0) |
||||
|
#define ST7735_RESET (0 + 20) |
||||
|
#define ST7735_MISO (-1) |
||||
|
#define ST7735_BUSY (-1) |
||||
|
#define ST7735_BL (0 + 15) |
||||
|
#define VTFT_CTRL (0 + 13) |
||||
|
|
||||
|
#define PIN_TFT_CS ST7735_CS |
||||
|
#define PIN_TFT_DC ST7735_RS |
||||
|
#define PIN_TFT_SDA ST7735_SDA |
||||
|
#define PIN_TFT_SCL ST7735_SCK |
||||
|
#define PIN_TFT_RST ST7735_RESET |
||||
|
#define PIN_TFT_LEDA_CTL ST7735_BL |
||||
|
#define PIN_TFT_LEDA_CTL_ACTIVE LOW |
||||
|
#define PIN_TFT_VDD_CTL VTFT_CTRL |
||||
|
#define PIN_TFT_VDD_CTL_ACTIVE LOW |
||||
|
#define DISPLAY_ROTATION 3 |
||||
|
|
||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||
|
// Builtin LEDs
|
||||
|
|
||||
|
#define PIN_LED1 (0 + 16) |
||||
|
#define LED_BUILTIN PIN_LED1 |
||||
|
#define PIN_LED LED_BUILTIN |
||||
|
#define LED_RED (-1) |
||||
|
#define LED_BLUE (-1) |
||||
|
#define LED_GREEN (-1) |
||||
|
#define LED_PIN LED_BUILTIN |
||||
|
#define LED_STATE_ON LOW |
||||
|
|
||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||
|
// Builtin buttons
|
||||
|
|
||||
|
#define PIN_BUTTON1 (32 + 10) |
||||
|
#define PIN_BUTTON2 (0 + 14) |
||||
|
#define BUTTON_PIN PIN_BUTTON1 |
||||
|
#define BUTTON_PIN2 PIN_BUTTON2 |
||||
|
#define PIN_USER_BTN BUTTON_PIN |
||||
|
|
||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||
|
// UART
|
||||
|
|
||||
|
// No longer populated on PCB.
|
||||
|
#define PIN_SERIAL2_RX (-1) |
||||
|
#define PIN_SERIAL2_TX (-1) |
||||
|
|
||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||
|
// I2C
|
||||
|
|
||||
|
#define WIRE_INTERFACES_COUNT (1) |
||||
|
|
||||
|
#define PIN_WIRE_SDA (32 + 3) |
||||
|
#define PIN_WIRE_SCL (0 + 10) |
||||
|
|
||||
|
#define PIN_SENSOR_EN (32 + 6) |
||||
|
#define PIN_SENSOR_EN_ACTIVE LOW |
||||
|
|
||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||
|
// LoRa
|
||||
|
|
||||
|
#define USE_SX1262 |
||||
|
#define SX126X_CS (32 + 11) |
||||
|
#define LORA_CS SX126X_CS |
||||
|
#define SX126X_DIO1 (0 + 31) |
||||
|
#define SX126X_BUSY (0 + 29) |
||||
|
#define SX126X_RESET (0 + 2) |
||||
|
#define SX126X_DIO2_AS_RF_SWITCH true |
||||
|
#define SX126X_DIO3_TCXO_VOLTAGE 1.8 |
||||
|
#define SX126X_CURRENT_LIMIT 140 |
||||
|
#define SX126X_RX_BOOSTED_GAIN 1 |
||||
|
|
||||
|
#define P_LORA_DIO_1 SX126X_DIO1 |
||||
|
#define P_LORA_NSS LORA_CS |
||||
|
#define P_LORA_RESET SX126X_RESET |
||||
|
#define P_LORA_BUSY SX126X_BUSY |
||||
|
#define P_LORA_TX_LED PIN_LED1 |
||||
|
|
||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||
|
// SPI
|
||||
|
|
||||
|
#define SPI_INTERFACES_COUNT (2) |
||||
|
|
||||
|
#define PIN_SPI_MISO (0 + 3) |
||||
|
#define PIN_SPI_MOSI (32 + 14) |
||||
|
#define PIN_SPI_SCK (32 + 13) |
||||
|
#define PIN_SPI_NSS LORA_CS |
||||
|
|
||||
|
#define PIN_SPI1_MISO ST7735_MISO |
||||
|
#define PIN_SPI1_MOSI ST7735_SDA |
||||
|
#define PIN_SPI1_SCK ST7735_SCK |
||||
|
|
||||
|
#define P_LORA_SCLK PIN_SPI_SCK |
||||
|
#define P_LORA_MISO PIN_SPI_MISO |
||||
|
#define P_LORA_MOSI PIN_SPI_MOSI |
||||
|
|
||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||
|
// GPS
|
||||
|
|
||||
|
#define GPS_UC6580 |
||||
|
#define GPS_BAUD_RATE 115200 |
||||
|
#define PIN_GPS_RESET (0 + 26) |
||||
|
#define GPS_RESET PIN_GPS_RESET |
||||
|
#define GPS_RESET_MODE LOW |
||||
|
#define PIN_GPS_RESET_ACTIVE LOW |
||||
|
#define PIN_GPS_EN (0 + 4) |
||||
|
#define GPS_EN PIN_GPS_EN |
||||
|
#define GPS_EN_ACTIVE LOW |
||||
|
#define PIN_GPS_EN_ACTIVE LOW |
||||
|
#define PIN_GPS_PPS (32 + 9) |
||||
|
#define GPS_TX_PIN (0 + 8) |
||||
|
#define GPS_RX_PIN (0 + 7) |
||||
|
#define PIN_GPS_TX GPS_TX_PIN |
||||
|
#define PIN_GPS_RX GPS_RX_PIN |
||||
|
|
||||
|
#define PIN_SERIAL1_RX GPS_RX_PIN |
||||
|
#define PIN_SERIAL1_TX GPS_TX_PIN |
||||
|
|
||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||
|
// Buzzer
|
||||
|
|
||||
|
#define PIN_BUZZER (0 + 9) |
||||
|
#define PIN_BUZZER_VOLTAGE_MULTIPLIER_1 (32 + 2) |
||||
|
#define PIN_BUZZER_VOLTAGE_MULTIPLIER_2 (32 + 5) |
||||
|
|
||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||
|
// Battery
|
||||
|
|
||||
|
#define ADC_CTRL (0 + 11) |
||||
|
#define PIN_BAT_CTL ADC_CTRL |
||||
|
#define ADC_CTRL_ENABLED HIGH |
||||
|
#define BATTERY_PIN (0 + 5) |
||||
|
#define PIN_VBAT_READ BATTERY_PIN |
||||
|
#define ADC_RESOLUTION (14) |
||||
|
|
||||
|
#define AREF_VOLTAGE (3.0) |
||||
|
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0 |
||||
|
#define ADC_MULTIPLIER (4.916F) |
||||
|
#define MV_LSB (3000.0F / 4096.0F) |
||||
|
|
||||
|
#define PWRMGT_VOLTAGE_BOOTLOCK 3100 |
||||
|
#define PWRMGT_LPCOMP_AIN 3 |
||||
|
#define PWRMGT_LPCOMP_REFSEL 1 |
||||
|
|
||||
|
#define HAS_RTC 0 |
||||
@ -0,0 +1,39 @@ |
|||||
|
#include <Arduino.h> |
||||
|
#include <Wire.h> |
||||
|
|
||||
|
#include "TImpulsePlusBoard.h" |
||||
|
|
||||
|
void TImpulsePlusBoard::begin() { |
||||
|
NRF52BoardDCDC::begin(); |
||||
|
|
||||
|
// turn on 3.3v
|
||||
|
pinMode(RT9080_EN, OUTPUT); |
||||
|
digitalWrite(RT9080_EN, HIGH); |
||||
|
delay(100); |
||||
|
|
||||
|
// init gps pins
|
||||
|
pinMode(GPS_EN, OUTPUT); |
||||
|
digitalWrite(GPS_EN, HIGH); // gps off by default
|
||||
|
|
||||
|
// configure battery measurement
|
||||
|
pinMode(BATTERY_ADC_DATA, INPUT); |
||||
|
pinMode(BATTERY_MEASUREMENT_CONTROL, OUTPUT); |
||||
|
digitalWrite(BATTERY_MEASUREMENT_CONTROL, LOW); // turn off battery voltage measurement
|
||||
|
|
||||
|
// set the analog reference to 3.0V (default = 3.6V)
|
||||
|
analogReference(AR_INTERNAL_3_0); |
||||
|
|
||||
|
// set the resolution to 12-bit (0..4095)
|
||||
|
analogReadResolution(12); // Can be 8, 10, 12 or 14
|
||||
|
|
||||
|
// configure user button
|
||||
|
pinMode(TTP223_KEY, INPUT_PULLDOWN); |
||||
|
|
||||
|
#if defined(PIN_WIRE_SDA) && defined(PIN_WIRE_SCL) |
||||
|
Wire.setPins(PIN_WIRE_SDA, PIN_WIRE_SCL); |
||||
|
#endif |
||||
|
|
||||
|
Wire.begin(); |
||||
|
|
||||
|
delay(10); // give sx1262 some time to power up
|
||||
|
} |
||||
@ -0,0 +1,59 @@ |
|||||
|
#pragma once |
||||
|
|
||||
|
#include <MeshCore.h> |
||||
|
#include <Arduino.h> |
||||
|
#include <helpers/NRF52Board.h> |
||||
|
|
||||
|
class TImpulsePlusBoard : public NRF52BoardDCDC { |
||||
|
protected: |
||||
|
uint8_t btn_prev_state; |
||||
|
|
||||
|
public: |
||||
|
TImpulsePlusBoard() : NRF52Board("T-Impulse-Plus OTA") {} |
||||
|
void begin(); |
||||
|
|
||||
|
#if defined(P_LORA_TX_LED) |
||||
|
void onBeforeTransmit() override { |
||||
|
digitalWrite(P_LORA_TX_LED, HIGH); // turn TX LED on
|
||||
|
} |
||||
|
void onAfterTransmit() override { |
||||
|
digitalWrite(P_LORA_TX_LED, LOW); // turn TX LED off
|
||||
|
} |
||||
|
#endif |
||||
|
|
||||
|
uint16_t getBattMilliVolts() override { |
||||
|
// enable battery voltage measurement
|
||||
|
digitalWrite(BATTERY_MEASUREMENT_CONTROL, HIGH); |
||||
|
delay(100); |
||||
|
|
||||
|
analogReadResolution(12); |
||||
|
analogReference(AR_INTERNAL); |
||||
|
delay(10); |
||||
|
|
||||
|
// read battery voltage
|
||||
|
int adcvalue = 0; |
||||
|
analogReadResolution(12); |
||||
|
analogReference(AR_INTERNAL_3_0); |
||||
|
delay(10); |
||||
|
adcvalue = analogRead(BATTERY_ADC_DATA); |
||||
|
|
||||
|
// disable battery voltage measurement
|
||||
|
digitalWrite(BATTERY_MEASUREMENT_CONTROL, LOW); |
||||
|
|
||||
|
return ((adcvalue * ((3000.0 / 4096.0)))) * 2.0; |
||||
|
} |
||||
|
|
||||
|
const char* getManufacturerName() const override { |
||||
|
return "LilyGo T-Impulse-Plus"; |
||||
|
} |
||||
|
|
||||
|
void powerOff() override { |
||||
|
|
||||
|
// turn off 3.3v
|
||||
|
digitalWrite(RT9080_EN, LOW); |
||||
|
|
||||
|
// power off system
|
||||
|
sd_power_system_off(); |
||||
|
|
||||
|
} |
||||
|
}; |
||||
@ -0,0 +1,73 @@ |
|||||
|
[LilyGo_T_Impulse_Plus] |
||||
|
extends = nrf52_base |
||||
|
board = lilygo_t_impulse_plus_nrf52840 |
||||
|
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld |
||||
|
build_flags = ${nrf52_base.build_flags} |
||||
|
${sensor_base.build_flags} |
||||
|
-I variants/lilygo_t_impulse_plus |
||||
|
-D USE_SX1262 |
||||
|
-D RADIO_CLASS=CustomSX1262 |
||||
|
-D WRAPPER_CLASS=CustomSX1262Wrapper |
||||
|
-D LORA_TX_POWER=22 |
||||
|
-D SX126X_CURRENT_LIMIT=140 |
||||
|
-D SX126X_RX_BOOSTED_GAIN=1 |
||||
|
-D PIN_USER_BTN=-1 |
||||
|
; -D PIN_USER_BTN=TTP223_KEY ; leave button disabled until screen implemented |
||||
|
; -D USER_BTN_PRESSED=HIGH |
||||
|
-D PIN_WIRE_SDA=SCREEN_SDA |
||||
|
-D PIN_WIRE_SCL=SCREEN_SCL |
||||
|
-D ENV_PIN_SDA=IIC_SDA_2 ; firmware hangs without this |
||||
|
-D ENV_PIN_SCL=IIC_SCL_2 ; firmware hangs without this |
||||
|
build_src_filter = ${nrf52_base.build_src_filter} |
||||
|
+<TImpulsePlusBoard.cpp> |
||||
|
+<../variants/lilygo_t_impulse_plus> |
||||
|
+<helpers/ui/SSD1306Display.cpp> |
||||
|
+<helpers/sensors> |
||||
|
lib_deps= ${nrf52_base.lib_deps} |
||||
|
${sensor_base.lib_deps} |
||||
|
adafruit/Adafruit SSD1306 @ ^2.5.13 |
||||
|
adafruit/Adafruit GFX Library @ ^1.12.1 |
||||
|
|
||||
|
[env:LilyGo_T_Impulse_Plus_repeater] |
||||
|
extends = LilyGo_T_Impulse_Plus |
||||
|
build_src_filter = ${LilyGo_T_Impulse_Plus.build_src_filter} |
||||
|
+<../examples/simple_repeater> |
||||
|
build_flags = |
||||
|
${LilyGo_T_Impulse_Plus.build_flags} |
||||
|
-D ADVERT_NAME='"T-Impulse-Plus Repeater"' |
||||
|
-D ADMIN_PASSWORD='"password"' |
||||
|
-D MAX_NEIGHBOURS=50 |
||||
|
; -D MESH_PACKET_LOGGING=1 |
||||
|
; -D MESH_DEBUG=1 |
||||
|
lib_deps = ${LilyGo_T_Impulse_Plus.lib_deps} |
||||
|
adafruit/RTClib @ ^2.1.3 |
||||
|
|
||||
|
[env:LilyGo_T_Impulse_Plus_companion_radio_ble] |
||||
|
extends = LilyGo_T_Impulse_Plus |
||||
|
; board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld |
||||
|
; board_upload.maximum_size = 712704 |
||||
|
build_flags = |
||||
|
${LilyGo_T_Impulse_Plus.build_flags} |
||||
|
-I src/helpers/ui |
||||
|
-I examples/companion_radio/ui-new |
||||
|
-D DISPLAY_CLASS=SSD1306Display |
||||
|
-D MAX_CONTACTS=350 |
||||
|
-D MAX_GROUP_CHANNELS=40 |
||||
|
-D QSPIFLASH=1 |
||||
|
-D BLE_PIN_CODE=123456 |
||||
|
-D OFFLINE_QUEUE_SIZE=256 |
||||
|
; -D BLE_DEBUG_LOGGING=1 |
||||
|
; -D MESH_PACKET_LOGGING=1 |
||||
|
; -D MESH_DEBUG=1 |
||||
|
build_src_filter = ${LilyGo_T_Impulse_Plus.build_src_filter} |
||||
|
+<helpers/nrf52/SerialBLEInterface.cpp> |
||||
|
+<../examples/companion_radio/*.cpp> |
||||
|
+<../examples/companion_radio/ui-new/*.cpp> |
||||
|
lib_deps = |
||||
|
${LilyGo_T_Impulse_Plus.lib_deps} |
||||
|
densaugeo/base64 @ ~1.4.0 |
||||
|
|
||||
|
[env:LilyGo_T_Impulse_Plus_kiss_modem] |
||||
|
extends = LilyGo_T_Impulse_Plus |
||||
|
build_src_filter = ${LilyGo_T_Impulse_Plus.build_src_filter} |
||||
|
+<../examples/kiss_modem/> |
||||
@ -0,0 +1,37 @@ |
|||||
|
#include <Arduino.h> |
||||
|
#include "target.h" |
||||
|
#include <helpers/ArduinoHelpers.h> |
||||
|
#include <helpers/sensors/MicroNMEALocationProvider.h> |
||||
|
|
||||
|
TImpulsePlusBoard board; |
||||
|
|
||||
|
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI); |
||||
|
|
||||
|
WRAPPER_CLASS radio_driver(radio, board); |
||||
|
|
||||
|
VolatileRTCClock fallback_clock; |
||||
|
AutoDiscoverRTCClock rtc_clock(fallback_clock); |
||||
|
|
||||
|
#ifdef ENV_INCLUDE_GPS |
||||
|
MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock); |
||||
|
EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea); |
||||
|
#else |
||||
|
EnvironmentSensorManager sensors = EnvironmentSensorManager(); |
||||
|
#endif |
||||
|
|
||||
|
#ifdef DISPLAY_CLASS |
||||
|
DISPLAY_CLASS display; |
||||
|
MomentaryButton user_btn(PIN_USER_BTN, 1000, true); |
||||
|
#endif |
||||
|
|
||||
|
bool radio_init() { |
||||
|
rtc_clock.begin(Wire); |
||||
|
|
||||
|
return radio.std_init(&SPI); |
||||
|
} |
||||
|
|
||||
|
mesh::LocalIdentity radio_new_identity() { |
||||
|
RadioNoiseListener rng(radio); |
||||
|
return mesh::LocalIdentity(&rng); // create new random identity
|
||||
|
} |
||||
|
|
||||
@ -0,0 +1,27 @@ |
|||||
|
#pragma once |
||||
|
|
||||
|
#define RADIOLIB_STATIC_ONLY 1 |
||||
|
#include <RadioLib.h> |
||||
|
#include <helpers/radiolib/RadioLibWrappers.h> |
||||
|
#include <TImpulsePlusBoard.h> |
||||
|
#include <helpers/radiolib/CustomSX1262Wrapper.h> |
||||
|
#include <helpers/AutoDiscoverRTCClock.h> |
||||
|
#include <helpers/ArduinoHelpers.h> |
||||
|
#include <helpers/sensors/EnvironmentSensorManager.h> |
||||
|
#ifdef DISPLAY_CLASS |
||||
|
#include <helpers/ui/SSD1306Display.h> |
||||
|
#include <helpers/ui/MomentaryButton.h> |
||||
|
#endif |
||||
|
|
||||
|
extern TImpulsePlusBoard board; |
||||
|
extern WRAPPER_CLASS radio_driver; |
||||
|
extern AutoDiscoverRTCClock rtc_clock; |
||||
|
extern EnvironmentSensorManager sensors; |
||||
|
#ifdef DISPLAY_CLASS |
||||
|
extern DISPLAY_CLASS display; |
||||
|
extern MomentaryButton user_btn; |
||||
|
#endif |
||||
|
|
||||
|
bool radio_init(); |
||||
|
mesh::LocalIdentity radio_new_identity(); |
||||
|
|
||||
@ -0,0 +1,43 @@ |
|||||
|
/*
|
||||
|
Copyright (c) 2014-2015 Arduino LLC. All right reserved. |
||||
|
Copyright (c) 2016 Sandeep Mistry All right reserved. |
||||
|
Copyright (c) 2018, Adafruit Industries (adafruit.com) |
||||
|
|
||||
|
This library is free software; you can redistribute it and/or |
||||
|
modify it under the terms of the GNU Lesser General Public |
||||
|
License as published by the Free Software Foundation; either |
||||
|
version 2.1 of the License, or (at your option) any later version. |
||||
|
|
||||
|
This library is distributed in the hope that it will be useful, |
||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
||||
|
See the GNU Lesser General Public License for more details. |
||||
|
|
||||
|
You should have received a copy of the GNU Lesser General Public |
||||
|
License along with this library; if not, write to the Free Software |
||||
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
||||
|
*/ |
||||
|
|
||||
|
#include "variant.h" |
||||
|
#include "wiring_constants.h" |
||||
|
#include "wiring_digital.h" |
||||
|
#include "nrf.h" |
||||
|
|
||||
|
const uint32_t g_ADigitalPinMap[] = |
||||
|
{ |
||||
|
// P0
|
||||
|
0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 , |
||||
|
8 , 9 , 10, 11, 12, 13, 14, 15, |
||||
|
16, 17, 18, 19, 20, 21, 22, 23, |
||||
|
24, 25, 26, 27, 28, 29, 30, 31, |
||||
|
|
||||
|
// P1
|
||||
|
32, 33, 34, 35, 36, 37, 38, 39, |
||||
|
40, 41, 42, 43, 44, 45, 46, 47 |
||||
|
}; |
||||
|
|
||||
|
|
||||
|
void initVariant() |
||||
|
{ |
||||
|
|
||||
|
} |
||||
@ -0,0 +1,224 @@ |
|||||
|
/*
|
||||
|
Copyright (c) 2014-2015 Arduino LLC. All right reserved. |
||||
|
Copyright (c) 2016 Sandeep Mistry All right reserved. |
||||
|
Copyright (c) 2018, Adafruit Industries (adafruit.com) |
||||
|
|
||||
|
This library is free software; you can redistribute it and/or |
||||
|
modify it under the terms of the GNU Lesser General Public |
||||
|
License as published by the Free Software Foundation; either |
||||
|
version 2.1 of the License, or (at your option) any later version. |
||||
|
This library is distributed in the hope that it will be useful, |
||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
||||
|
See the GNU Lesser General Public License for more details. |
||||
|
You should have received a copy of the GNU Lesser General Public |
||||
|
License along with this library; if not, write to the Free Software |
||||
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
||||
|
*/ |
||||
|
|
||||
|
#ifndef _VARIANT_T_IMPULSE_PLUS_NRF52840_ |
||||
|
#define _VARIANT_T_IMPULSE_PLUS_NRF52840_ |
||||
|
|
||||
|
/** Master clock frequency */ |
||||
|
#define VARIANT_MCK (64000000ul) |
||||
|
|
||||
|
#define USE_LFXO // Board uses 32khz crystal for LF
|
||||
|
// define USE_LFRC // Board uses RC for LF
|
||||
|
|
||||
|
/*----------------------------------------------------------------------------
|
||||
|
* Headers |
||||
|
*----------------------------------------------------------------------------*/ |
||||
|
|
||||
|
#include "WVariant.h" |
||||
|
|
||||
|
#ifdef __cplusplus |
||||
|
extern "C" |
||||
|
{ |
||||
|
#endif // __cplusplus
|
||||
|
|
||||
|
#define _PINNUM(port, pin) ((port) * 32 + (pin)) |
||||
|
|
||||
|
// IIC
|
||||
|
#define IIC_SDA_1 _PINNUM(1, 8) |
||||
|
#define IIC_SCL_1 _PINNUM(0, 11) |
||||
|
#define IIC_SDA_2 _PINNUM(0, 20) |
||||
|
#define IIC_SCL_2 _PINNUM(0, 15) |
||||
|
|
||||
|
// TTP223
|
||||
|
#define TTP223_KEY _PINNUM(1, 4) |
||||
|
|
||||
|
// SSD1315
|
||||
|
#define SCREEN_WIDTH 128 |
||||
|
#define SCREEN_HEIGHT 64 |
||||
|
#define SCREEN_ADDRESS 0x3C |
||||
|
#define SCREEN_RST -1 |
||||
|
#define SCREEN_SDA IIC_SDA_2 |
||||
|
#define SCREEN_SCL IIC_SCL_2 |
||||
|
|
||||
|
// Lora S62F(SX1262)
|
||||
|
#define SX1262_CS _PINNUM(1, 14) |
||||
|
#define SX1262_RST _PINNUM(0, 2) |
||||
|
#define SX1262_SCLK _PINNUM(0, 3) |
||||
|
#define SX1262_MOSI _PINNUM(0, 28) |
||||
|
#define SX1262_MISO _PINNUM(0, 30) |
||||
|
#define SX1262_BUSY _PINNUM(0, 31) |
||||
|
#define SX1262_INT _PINNUM(0, 29) |
||||
|
#define SX1262_DIO1 _PINNUM(0, 29) |
||||
|
#define SX1262_DIO2 _PINNUM(1, 15) |
||||
|
#define SX1262_RF_VC1 _PINNUM(1, 13) |
||||
|
#define SX1262_RF_VC2 _PINNUM(1, 7) |
||||
|
|
||||
|
#define SX126X_TXEN SX1262_RF_VC1 |
||||
|
#define SX126X_RXEN SX1262_RF_VC2 |
||||
|
|
||||
|
#define P_LORA_NSS SX1262_CS |
||||
|
#define P_LORA_DIO_1 SX1262_DIO1 |
||||
|
#define P_LORA_RESET SX1262_RST |
||||
|
#define P_LORA_BUSY SX1262_BUSY |
||||
|
#define P_LORA_DIO_0 RADIOLIB_NC |
||||
|
#define P_LORA_DIO_2 SX1262_DIO2 |
||||
|
#define P_LORA_SCLK SX1262_SCLK |
||||
|
#define P_LORA_MISO SX1262_MISO |
||||
|
#define P_LORA_MOSI SX1262_MOSI |
||||
|
|
||||
|
// RT9080
|
||||
|
#define RT9080_EN _PINNUM(0, 14) |
||||
|
|
||||
|
// GPS
|
||||
|
#define GPS_EN _PINNUM(1, 10) |
||||
|
#define GPS_UART_RX _PINNUM(1, 11) |
||||
|
#define GPS_UART_TX _PINNUM(1, 12) |
||||
|
#define PIN_GPS_RX GPS_UART_RX |
||||
|
#define PIN_GPS_TX GPS_UART_TX |
||||
|
#define PIN_GPS_EN GPS_EN |
||||
|
#define GPS_BAUD_RATE 38400 |
||||
|
#define PIN_GPS_EN_ACTIVE LOW |
||||
|
|
||||
|
// Battery
|
||||
|
#define BATTERY_MEASUREMENT_CONTROL _PINNUM(0, 25) |
||||
|
#define BATTERY_ADC_DATA _PINNUM(0, 5) |
||||
|
|
||||
|
// Number of pins defined in PinDescription array
|
||||
|
#define PINS_COUNT (48) |
||||
|
#define NUM_DIGITAL_PINS (48) |
||||
|
#define NUM_ANALOG_INPUTS (6) |
||||
|
#define NUM_ANALOG_OUTPUTS (0) |
||||
|
|
||||
|
// LEDs
|
||||
|
#define PIN_LED1 (_PINNUM(0, 17)) |
||||
|
// #define PIN_LED2 (_PINNUM(1, 5))
|
||||
|
// #define PIN_LED3 (15)
|
||||
|
// #define PIN_LED4 (16)
|
||||
|
|
||||
|
#define LED_BUILTIN PIN_LED1 |
||||
|
// #define LED_CONN PIN_LED2
|
||||
|
|
||||
|
// #define LED_RED PIN_LED1
|
||||
|
#define LED_BLUE PIN_LED1 |
||||
|
|
||||
|
#define LED_STATE_ON 0 // State when LED is litted
|
||||
|
|
||||
|
/*
|
||||
|
* Buttons |
||||
|
*/ |
||||
|
#define PIN_BUTTON1 _PINNUM(0, 24) |
||||
|
// #define PIN_BUTTON2 12
|
||||
|
// #define PIN_BUTTON3 24
|
||||
|
// #define PIN_BUTTON4 25
|
||||
|
|
||||
|
/*
|
||||
|
* Analog pins |
||||
|
*/ |
||||
|
#define PIN_A0 (3) |
||||
|
#define PIN_A1 (4) |
||||
|
#define PIN_A2 (28) |
||||
|
#define PIN_A3 (29) |
||||
|
#define PIN_A4 (30) |
||||
|
#define PIN_A5 (31) |
||||
|
#define PIN_A6 (0xff) |
||||
|
#define PIN_A7 (0xff) |
||||
|
|
||||
|
static const uint8_t A0 = PIN_A0 ; |
||||
|
static const uint8_t A1 = PIN_A1 ; |
||||
|
static const uint8_t A2 = PIN_A2 ; |
||||
|
static const uint8_t A3 = PIN_A3 ; |
||||
|
static const uint8_t A4 = PIN_A4 ; |
||||
|
static const uint8_t A5 = PIN_A5 ; |
||||
|
static const uint8_t A6 = PIN_A6 ; |
||||
|
static const uint8_t A7 = PIN_A7 ; |
||||
|
#define ADC_RESOLUTION 14 |
||||
|
|
||||
|
// Other pins
|
||||
|
#define PIN_AREF (2) |
||||
|
#define PIN_NFC1 (9) |
||||
|
#define PIN_NFC2 (10) |
||||
|
|
||||
|
static const uint8_t AREF = PIN_AREF; |
||||
|
|
||||
|
/*
|
||||
|
* Serial interfaces |
||||
|
*/ |
||||
|
|
||||
|
// Arduino Header D0, D1
|
||||
|
#define PIN_SERIAL1_RX (33) // P1.01
|
||||
|
#define PIN_SERIAL1_TX (34) // P1.02
|
||||
|
|
||||
|
// Connected to Jlink CDC
|
||||
|
#define PIN_SERIAL2_RX (8) |
||||
|
#define PIN_SERIAL2_TX (6) |
||||
|
|
||||
|
/*
|
||||
|
* SPI Interfaces |
||||
|
*/ |
||||
|
#define SPI_INTERFACES_COUNT 1 |
||||
|
|
||||
|
#define PIN_SPI_MISO (46) |
||||
|
#define PIN_SPI_MOSI (45) |
||||
|
#define PIN_SPI_SCK (47) |
||||
|
|
||||
|
static const uint8_t SS = 44 ; |
||||
|
static const uint8_t MOSI = PIN_SPI_MOSI ; |
||||
|
static const uint8_t MISO = PIN_SPI_MISO ; |
||||
|
static const uint8_t SCK = PIN_SPI_SCK ; |
||||
|
|
||||
|
/*
|
||||
|
* Wire Interfaces |
||||
|
*/ |
||||
|
#define WIRE_INTERFACES_COUNT 2 |
||||
|
|
||||
|
#define PIN_WIRE_SDA (26) |
||||
|
#define PIN_WIRE_SCL (27) |
||||
|
|
||||
|
#define PIN_WIRE1_SDA (26) |
||||
|
#define PIN_WIRE1_SCL (27) |
||||
|
|
||||
|
// ZD25WQ32CEIGR SPI
|
||||
|
#define ZD25WQ32C_CS _PINNUM(0, 12) |
||||
|
#define ZD25WQ32C_SCLK _PINNUM(0, 4) |
||||
|
#define ZD25WQ32C_MOSI _PINNUM(0, 6) |
||||
|
#define ZD25WQ32C_MISO _PINNUM(1, 9) |
||||
|
#define ZD25WQ32C_IO0 _PINNUM(0, 6) |
||||
|
#define ZD25WQ32C_IO1 _PINNUM(1, 9) |
||||
|
#define ZD25WQ32C_IO2 _PINNUM(0, 8) |
||||
|
#define ZD25WQ32C_IO3 _PINNUM(0, 26) |
||||
|
|
||||
|
#define PIN_QSPI_SCK ZD25WQ32C_SCLK |
||||
|
#define PIN_QSPI_CS ZD25WQ32C_CS |
||||
|
#define PIN_QSPI_IO0 ZD25WQ32C_IO0 |
||||
|
#define PIN_QSPI_IO1 ZD25WQ32C_IO1 |
||||
|
#define PIN_QSPI_IO2 ZD25WQ32C_IO2 |
||||
|
#define PIN_QSPI_IO3 ZD25WQ32C_IO3 |
||||
|
|
||||
|
// On-board QSPI Flash
|
||||
|
#define EXTERNAL_FLASH_DEVICES MX25R6435F |
||||
|
#define EXTERNAL_FLASH_USE_QSPI |
||||
|
|
||||
|
#ifdef __cplusplus |
||||
|
} |
||||
|
#endif |
||||
|
|
||||
|
/*----------------------------------------------------------------------------
|
||||
|
* Arduino objects - C++ only |
||||
|
*----------------------------------------------------------------------------*/ |
||||
|
|
||||
|
#endif |
||||
@ -0,0 +1,114 @@ |
|||||
|
#pragma once |
||||
|
|
||||
|
#include <Arduino.h> |
||||
|
#include <helpers/ESP32Board.h> |
||||
|
#include <driver/rtc_io.h> |
||||
|
|
||||
|
#ifndef P_PRIMARY_LNA_EN_ACTIVE |
||||
|
#define P_PRIMARY_LNA_EN_ACTIVE LOW |
||||
|
#endif |
||||
|
|
||||
|
#ifndef P_PA1_EN_ACTIVE |
||||
|
#define P_PA1_EN_ACTIVE HIGH |
||||
|
#endif |
||||
|
|
||||
|
class StationG3Board : public ESP32Board { |
||||
|
void setPAModeHigh(bool enabled) { |
||||
|
#ifdef P_PA1_EN |
||||
|
// Station G3 PA PL1 mode: LOW/open is PA low, HIGH/short is PA high.
|
||||
|
digitalWrite(P_PA1_EN, enabled ? P_PA1_EN_ACTIVE : !P_PA1_EN_ACTIVE); |
||||
|
#endif |
||||
|
} |
||||
|
|
||||
|
void setPrimaryLNAControl(bool enabled) { |
||||
|
#ifdef P_PRIMARY_LNA_EN |
||||
|
// Station G3 primary LNA mode is active-low: LOW/open is LNA on, HIGH/short is LNA off.
|
||||
|
digitalWrite(P_PRIMARY_LNA_EN, enabled ? P_PRIMARY_LNA_EN_ACTIVE : !P_PRIMARY_LNA_EN_ACTIVE); |
||||
|
#endif |
||||
|
} |
||||
|
|
||||
|
public: |
||||
|
void begin() { |
||||
|
ESP32Board::begin(); |
||||
|
|
||||
|
#ifdef P_PA1_EN |
||||
|
rtc_gpio_hold_dis((gpio_num_t)P_PA1_EN); |
||||
|
pinMode(P_PA1_EN, OUTPUT); |
||||
|
setPAModeHigh(false); |
||||
|
#endif |
||||
|
|
||||
|
#ifdef P_PRIMARY_LNA_EN |
||||
|
rtc_gpio_hold_dis((gpio_num_t)P_PRIMARY_LNA_EN); |
||||
|
pinMode(P_PRIMARY_LNA_EN, OUTPUT); |
||||
|
setPrimaryLNAControl(true); |
||||
|
#endif |
||||
|
|
||||
|
esp_reset_reason_t reason = esp_reset_reason(); |
||||
|
if (reason == ESP_RST_DEEPSLEEP) { |
||||
|
uint64_t wakeup_source = esp_sleep_get_ext1_wakeup_status(); |
||||
|
if (wakeup_source & (1ULL << P_LORA_DIO_1)) { |
||||
|
startup_reason = BD_STARTUP_RX_PACKET; |
||||
|
} |
||||
|
|
||||
|
rtc_gpio_hold_dis((gpio_num_t)P_LORA_NSS); |
||||
|
rtc_gpio_deinit((gpio_num_t)P_LORA_DIO_1); |
||||
|
} |
||||
|
} |
||||
|
|
||||
|
void setPrimaryLNAEnable(bool enabled) { |
||||
|
setPrimaryLNAControl(enabled); |
||||
|
} |
||||
|
|
||||
|
void setPrimaryPAHighPower(bool enabled) { |
||||
|
setPAModeHigh(enabled); |
||||
|
} |
||||
|
|
||||
|
void onBeforeTransmit() override { |
||||
|
ESP32Board::onBeforeTransmit(); |
||||
|
setPrimaryLNAControl(false); |
||||
|
} |
||||
|
|
||||
|
void onAfterTransmit() override { |
||||
|
ESP32Board::onAfterTransmit(); |
||||
|
setPrimaryLNAControl(true); |
||||
|
} |
||||
|
|
||||
|
void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1) { |
||||
|
esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON); |
||||
|
|
||||
|
rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY); |
||||
|
rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1); |
||||
|
|
||||
|
rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS); |
||||
|
|
||||
|
#ifdef P_PA1_EN |
||||
|
setPAModeHigh(false); |
||||
|
rtc_gpio_hold_en((gpio_num_t)P_PA1_EN); |
||||
|
#endif |
||||
|
|
||||
|
#ifdef P_PRIMARY_LNA_EN |
||||
|
setPrimaryLNAControl(true); |
||||
|
rtc_gpio_hold_en((gpio_num_t)P_PRIMARY_LNA_EN); |
||||
|
#endif |
||||
|
|
||||
|
if (pin_wake_btn < 0) { |
||||
|
esp_sleep_enable_ext1_wakeup((1ULL << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH); |
||||
|
} else { |
||||
|
esp_sleep_enable_ext1_wakeup((1ULL << P_LORA_DIO_1) | (1ULL << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH); |
||||
|
} |
||||
|
|
||||
|
if (secs > 0) { |
||||
|
esp_sleep_enable_timer_wakeup(secs * 1000000); |
||||
|
} |
||||
|
|
||||
|
esp_deep_sleep_start(); |
||||
|
} |
||||
|
|
||||
|
uint16_t getBattMilliVolts() override { |
||||
|
return 0; |
||||
|
} |
||||
|
|
||||
|
const char* getManufacturerName() const override { |
||||
|
return "Station G3 ESP32"; |
||||
|
} |
||||
|
}; |
||||
@ -0,0 +1,160 @@ |
|||||
|
[Station_G3_ESP32] |
||||
|
extends = esp32_base |
||||
|
board = station-g3-esp32 |
||||
|
build_flags = |
||||
|
${esp32_base.build_flags} |
||||
|
${sensor_base.build_flags} |
||||
|
-I variants/station_g3_esp32 |
||||
|
-I src/helpers/ui |
||||
|
-D STATION_G3_ESP32 |
||||
|
-D USE_SX1262 |
||||
|
-D RADIO_CLASS=CustomSX1262 |
||||
|
-D WRAPPER_CLASS=CustomSX1262Wrapper |
||||
|
-D P_LORA_DIO_1=48 |
||||
|
-D P_LORA_NSS=11 |
||||
|
-D P_LORA_RESET=21 |
||||
|
-D P_LORA_BUSY=47 |
||||
|
-D P_LORA_SCLK=12 |
||||
|
-D P_LORA_MISO=14 |
||||
|
-D P_LORA_MOSI=13 |
||||
|
-D P_PA1_EN=9 ; PA PL1 Mode: LOW/open is PA low, HIGH/short is PA high. |
||||
|
-D P_PA1_EN_ACTIVE=HIGH |
||||
|
-D P_PRIMARY_LNA_EN=10 ; Primary Slot LNA Mode: LOW/open is LNA on, HIGH/short is LNA off. |
||||
|
-D P_PRIMARY_LNA_EN_ACTIVE=LOW |
||||
|
-D LORA_TX_POWER=7 ; configured as 7dbm, because the final output will be ~27dbm (~0.5w) if the PA is enabled. |
||||
|
-D MAX_LORA_TX_POWER=22 |
||||
|
; -D P_LORA_TX_LED=35 |
||||
|
-D PIN_BOARD_SDA=5 |
||||
|
-D PIN_BOARD_SCL=6 |
||||
|
-D PIN_USER_BTN=38 |
||||
|
-D PIN_GPS_RX=15 |
||||
|
-D PIN_GPS_TX=7 |
||||
|
-D SX126X_DIO2_AS_RF_SWITCH=true |
||||
|
-D SX126X_DIO3_TCXO_VOLTAGE=1.8 |
||||
|
-D SX126X_CURRENT_LIMIT=140 |
||||
|
-D SX126X_RX_BOOSTED_GAIN=0 |
||||
|
-D DISPLAY_CLASS=SH1106Display |
||||
|
build_src_filter = ${esp32_base.build_src_filter} |
||||
|
+<../variants/station_g3_esp32> |
||||
|
+<helpers/sensors> |
||||
|
+<helpers/ui/SH1106Display.cpp> |
||||
|
+<helpers/ui/MomentaryButton.cpp> |
||||
|
lib_deps = |
||||
|
${esp32_base.lib_deps} |
||||
|
${sensor_base.lib_deps} |
||||
|
adafruit/Adafruit SH110X @ ~2.1.13 |
||||
|
adafruit/Adafruit GFX Library @ ^1.12.1 |
||||
|
|
||||
|
[env:Station_G3_ESP32_repeater] |
||||
|
extends = Station_G3_ESP32 |
||||
|
build_flags = |
||||
|
${Station_G3_ESP32.build_flags} |
||||
|
-D ADVERT_NAME='"Station G3 ESP32 Repeater"' |
||||
|
-D ADVERT_LAT=0.0 |
||||
|
-D ADVERT_LON=0.0 |
||||
|
-D ADMIN_PASSWORD='"password"' |
||||
|
-D MAX_NEIGHBOURS=50 |
||||
|
; -D MESH_PACKET_LOGGING=1 |
||||
|
; -D MESH_DEBUG=1 |
||||
|
build_src_filter = ${Station_G3_ESP32.build_src_filter} |
||||
|
+<../examples/simple_repeater> |
||||
|
lib_deps = |
||||
|
${Station_G3_ESP32.lib_deps} |
||||
|
${esp32_ota.lib_deps} |
||||
|
|
||||
|
[env:Station_G3_ESP32_logging_repeater] |
||||
|
extends = Station_G3_ESP32 |
||||
|
build_flags = |
||||
|
${Station_G3_ESP32.build_flags} |
||||
|
-D ADVERT_NAME='"Station G3 ESP32 Logging Repeater"' |
||||
|
-D ADVERT_LAT=0.0 |
||||
|
-D ADVERT_LON=0.0 |
||||
|
-D ADMIN_PASSWORD='"password"' |
||||
|
-D MAX_NEIGHBOURS=50 |
||||
|
-D MESH_PACKET_LOGGING=1 |
||||
|
; -D MESH_DEBUG=1 |
||||
|
build_src_filter = ${Station_G3_ESP32.build_src_filter} |
||||
|
+<../examples/simple_repeater> |
||||
|
lib_deps = |
||||
|
${Station_G3_ESP32.lib_deps} |
||||
|
${esp32_ota.lib_deps} |
||||
|
|
||||
|
[env:Station_G3_ESP32_room_server] |
||||
|
extends = Station_G3_ESP32 |
||||
|
build_src_filter = ${Station_G3_ESP32.build_src_filter} |
||||
|
+<../examples/simple_room_server> |
||||
|
build_flags = |
||||
|
${Station_G3_ESP32.build_flags} |
||||
|
-D ADVERT_NAME='"Station G3 ESP32 Room"' |
||||
|
-D ADVERT_LAT=0.0 |
||||
|
-D ADVERT_LON=0.0 |
||||
|
-D ADMIN_PASSWORD='"password"' |
||||
|
-D ROOM_PASSWORD='"hello"' |
||||
|
; -D MESH_PACKET_LOGGING=1 |
||||
|
; -D MESH_DEBUG=1 |
||||
|
lib_deps = |
||||
|
${Station_G3_ESP32.lib_deps} |
||||
|
${esp32_ota.lib_deps} |
||||
|
|
||||
|
[env:Station_G3_ESP32_companion_radio_usb] |
||||
|
extends = Station_G3_ESP32 |
||||
|
build_flags = |
||||
|
${Station_G3_ESP32.build_flags} |
||||
|
-I examples/companion_radio/ui-new |
||||
|
-D MAX_CONTACTS=350 |
||||
|
-D MAX_GROUP_CHANNELS=40 |
||||
|
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1 |
||||
|
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1 |
||||
|
build_src_filter = ${Station_G3_ESP32.build_src_filter} |
||||
|
+<helpers/esp32/*.cpp> |
||||
|
+<../examples/companion_radio/*.cpp> |
||||
|
+<../examples/companion_radio/ui-new/*.cpp> |
||||
|
lib_deps = |
||||
|
${Station_G3_ESP32.lib_deps} |
||||
|
densaugeo/base64 @ ~1.4.0 |
||||
|
|
||||
|
[env:Station_G3_ESP32_companion_radio_ble] |
||||
|
extends = Station_G3_ESP32 |
||||
|
build_flags = |
||||
|
${Station_G3_ESP32.build_flags} |
||||
|
-I examples/companion_radio/ui-new |
||||
|
-D MAX_CONTACTS=350 |
||||
|
-D MAX_GROUP_CHANNELS=40 |
||||
|
-D BLE_PIN_CODE=123456 |
||||
|
-D BLE_DEBUG_LOGGING=1 |
||||
|
-D OFFLINE_QUEUE_SIZE=256 |
||||
|
; -D MESH_PACKET_LOGGING=1 |
||||
|
; -D MESH_DEBUG=1 |
||||
|
build_src_filter = ${Station_G3_ESP32.build_src_filter} |
||||
|
+<helpers/esp32/*.cpp> |
||||
|
+<../examples/companion_radio/*.cpp> |
||||
|
+<../examples/companion_radio/ui-new/*.cpp> |
||||
|
lib_deps = |
||||
|
${Station_G3_ESP32.lib_deps} |
||||
|
densaugeo/base64 @ ~1.4.0 |
||||
|
|
||||
|
[env:Station_G3_ESP32_companion_radio_wifi] |
||||
|
extends = Station_G3_ESP32 |
||||
|
build_flags = |
||||
|
${Station_G3_ESP32.build_flags} |
||||
|
-I examples/companion_radio/ui-new |
||||
|
-D MAX_CONTACTS=350 |
||||
|
-D MAX_GROUP_CHANNELS=40 |
||||
|
-D WIFI_DEBUG_LOGGING=1 |
||||
|
-D WIFI_SSID='"myssid"' |
||||
|
-D WIFI_PWD='"mypwd"' |
||||
|
-D OFFLINE_QUEUE_SIZE=256 |
||||
|
; -D MESH_PACKET_LOGGING=1 |
||||
|
; -D MESH_DEBUG=1 |
||||
|
build_src_filter = ${Station_G3_ESP32.build_src_filter} |
||||
|
+<helpers/esp32/*.cpp> |
||||
|
+<../examples/companion_radio/*.cpp> |
||||
|
+<../examples/companion_radio/ui-new/*.cpp> |
||||
|
lib_deps = |
||||
|
${Station_G3_ESP32.lib_deps} |
||||
|
densaugeo/base64 @ ~1.4.0 |
||||
|
|
||||
|
[env:Station_G3_ESP32_kiss_modem] |
||||
|
extends = Station_G3_ESP32 |
||||
|
build_src_filter = ${Station_G3_ESP32.build_src_filter} |
||||
|
+<../examples/kiss_modem/> |
||||
@ -0,0 +1,46 @@ |
|||||
|
#include <Arduino.h> |
||||
|
#include "target.h" |
||||
|
|
||||
|
StationG3Board board; |
||||
|
|
||||
|
#if defined(P_LORA_SCLK) |
||||
|
static SPIClass spi; |
||||
|
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi); |
||||
|
#else |
||||
|
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY); |
||||
|
#endif |
||||
|
|
||||
|
WRAPPER_CLASS radio_driver(radio, board); |
||||
|
|
||||
|
ESP32RTCClock fallback_clock; |
||||
|
AutoDiscoverRTCClock rtc_clock(fallback_clock); |
||||
|
|
||||
|
#if ENV_INCLUDE_GPS |
||||
|
#include <helpers/sensors/MicroNMEALocationProvider.h> |
||||
|
MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock); |
||||
|
EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea); |
||||
|
#else |
||||
|
EnvironmentSensorManager sensors; |
||||
|
#endif |
||||
|
|
||||
|
#ifdef DISPLAY_CLASS |
||||
|
DISPLAY_CLASS display; |
||||
|
MomentaryButton user_btn(PIN_USER_BTN, 1000, true); |
||||
|
#endif |
||||
|
|
||||
|
bool radio_init() { |
||||
|
fallback_clock.begin(); |
||||
|
rtc_clock.begin(Wire); |
||||
|
|
||||
|
#if defined(P_LORA_SCLK) |
||||
|
spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI); |
||||
|
return radio.std_init(&spi); |
||||
|
#else |
||||
|
return radio.std_init(); |
||||
|
#endif |
||||
|
} |
||||
|
|
||||
|
mesh::LocalIdentity radio_new_identity() { |
||||
|
RadioNoiseListener rng(radio); |
||||
|
return mesh::LocalIdentity(&rng); |
||||
|
} |
||||
@ -0,0 +1,27 @@ |
|||||
|
#pragma once |
||||
|
|
||||
|
#define RADIOLIB_STATIC_ONLY 1 |
||||
|
#include <RadioLib.h> |
||||
|
#include <helpers/radiolib/RadioLibWrappers.h> |
||||
|
#include <StationG3Board.h> |
||||
|
#include <helpers/radiolib/CustomSX1262Wrapper.h> |
||||
|
#include <helpers/AutoDiscoverRTCClock.h> |
||||
|
#include <helpers/sensors/EnvironmentSensorManager.h> |
||||
|
|
||||
|
#ifdef DISPLAY_CLASS |
||||
|
#include <helpers/ui/SH1106Display.h> |
||||
|
#include <helpers/ui/MomentaryButton.h> |
||||
|
#endif |
||||
|
|
||||
|
extern StationG3Board board; |
||||
|
extern WRAPPER_CLASS radio_driver; |
||||
|
extern AutoDiscoverRTCClock rtc_clock; |
||||
|
extern EnvironmentSensorManager sensors; |
||||
|
|
||||
|
#ifdef DISPLAY_CLASS |
||||
|
extern DISPLAY_CLASS display; |
||||
|
extern MomentaryButton user_btn; |
||||
|
#endif |
||||
|
|
||||
|
bool radio_init(); |
||||
|
mesh::LocalIdentity radio_new_identity(); |
||||
Loading…
Reference in new issue