mirror of https://github.com/meshcore-dev/MeshCore
lbibass
5 months ago
8 changed files with 680 additions and 0 deletions
@ -0,0 +1,72 @@ |
|||
{ |
|||
"build": { |
|||
"arduino": { |
|||
"ldscript": "nrf52840_s140_v6.ld" |
|||
}, |
|||
"core": "nRF5", |
|||
"cpu": "cortex-m4", |
|||
"extra_flags": "-DARDUINO_NRF52840_MUZI_BASE_DUO -DNRF52840_XXAA", |
|||
"f_cpu": "64000000L", |
|||
"hwids": [ |
|||
[ |
|||
"0x239A", |
|||
"0x4405" |
|||
], |
|||
[ |
|||
"0x239A", |
|||
"0x0029" |
|||
], |
|||
[ |
|||
"0x239A", |
|||
"0x002A" |
|||
] |
|||
], |
|||
"usb_product": "muzi_base_duo", |
|||
"mcu": "nrf52840", |
|||
"variant": "MUZI_BASE_DUO", |
|||
"bsp": { |
|||
"name": "adafruit" |
|||
}, |
|||
"softdevice": { |
|||
"sd_flags": "-DS140", |
|||
"sd_name": "s140", |
|||
"sd_version": "6.1.1", |
|||
"sd_fwid": "0x00B6" |
|||
}, |
|||
"bootloader": { |
|||
"settings_addr": "0xFF000" |
|||
} |
|||
}, |
|||
"connectivity": [ |
|||
"bluetooth" |
|||
], |
|||
"debug": { |
|||
"jlink_device": "nRF52840_xxAA", |
|||
"onboard_tools": [ |
|||
"jlink" |
|||
], |
|||
"svd_path": "nrf52840.svd", |
|||
"openocd_target": "nrf52.cfg" |
|||
}, |
|||
"frameworks": [ |
|||
"arduino" |
|||
], |
|||
"name": "Muzi Base Duo", |
|||
"upload": { |
|||
"maximum_ram_size": 248832, |
|||
"maximum_size": 815104, |
|||
"speed": 115200, |
|||
"use_1200bps_touch": true, |
|||
"require_upload_port": true, |
|||
"wait_for_upload_port": true, |
|||
"protocol": "nrfutil", |
|||
"protocols": [ |
|||
"jlink", |
|||
"nrfjprog", |
|||
"nrfutil", |
|||
"stlink" |
|||
] |
|||
}, |
|||
"url": "https://github.com/muzi-works", |
|||
"vendor": "MuziWorks" |
|||
} |
|||
@ -0,0 +1,46 @@ |
|||
#include <Arduino.h> |
|||
#include <Wire.h> |
|||
|
|||
#include "muzi_base_duoBoard.h" |
|||
|
|||
// void muzi_base_duoBoard::begin() {
|
|||
// NRF52BoardDCDC::begin();
|
|||
// btn_prev_state = HIGH;
|
|||
|
|||
// #ifdef BUTTON_PIN
|
|||
// pinMode(BATTERY_PIN, INPUT);
|
|||
// pinMode(BUTTON_PIN, INPUT);
|
|||
// pinMode(LED_PIN, OUTPUT);
|
|||
// #endif
|
|||
|
|||
// #if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL)
|
|||
// Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL);
|
|||
// #endif
|
|||
|
|||
// Wire.begin();
|
|||
|
|||
// delay(10); // give sx1262 some time to power up
|
|||
// }
|
|||
void muzi_base_duoBoard::begin() { |
|||
NRF52BoardDCDC::begin(); |
|||
pinMode(BATTERY_PIN, INPUT); |
|||
#ifdef PIN_USER_BTN |
|||
pinMode(PIN_USER_BTN, INPUT); |
|||
#endif |
|||
|
|||
#ifdef PIN_USER_BTN_ANA |
|||
pinMode(PIN_USER_BTN_ANA, INPUT_PULLUP); |
|||
#endif |
|||
|
|||
#if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL) |
|||
Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL); |
|||
#endif |
|||
|
|||
Wire.begin(); |
|||
|
|||
#ifdef NRF52_POWER_MANAGEMENT |
|||
// Boot voltage protection check (may not return if voltage too low)
|
|||
// We need to call this after we configure SX126X_POWER_EN as output but before we pull high
|
|||
checkBootVoltage(&power_config); |
|||
#endif |
|||
} |
|||
@ -0,0 +1,88 @@ |
|||
#pragma once |
|||
|
|||
#include <MeshCore.h> |
|||
#include <Arduino.h> |
|||
#include <helpers/NRF52Board.h> |
|||
|
|||
class muzi_base_duoBoard : public NRF52BoardDCDC { |
|||
protected: |
|||
#ifdef NRF52_POWER_MANAGEMENT |
|||
void initiateShutdown(uint8_t reason) override; |
|||
#endif |
|||
|
|||
public: |
|||
muzi_base_duoBoard() : NRF52Board("MUZI_BASE_DUO_OTA") {} |
|||
void begin(); |
|||
|
|||
#define BATTERY_SAMPLES 8 |
|||
|
|||
uint16_t getBattMilliVolts() override { |
|||
MESH_DEBUG_PRINTLN("BaseDuo: Sampling battery"); |
|||
analogReadResolution(12); |
|||
|
|||
uint32_t raw = 0; |
|||
for (int i = 0; i < BATTERY_SAMPLES; i++) { |
|||
raw += analogRead(BATTERY_PIN); |
|||
} |
|||
raw = raw / BATTERY_SAMPLES; |
|||
|
|||
return (ADC_MULTIPLIER * raw) / 4096; |
|||
} |
|||
|
|||
const char* getManufacturerName() const override { |
|||
return "Muzi Base Duo"; |
|||
} |
|||
|
|||
// int buttonStateChanged() {
|
|||
// #ifdef BUTTON_PIN
|
|||
// uint8_t v = digitalRead(BUTTON_PIN);
|
|||
// if (v != btn_prev_state) {
|
|||
// btn_prev_state = v;
|
|||
// return (v == LOW) ? 1 : -1;
|
|||
// }
|
|||
// #endif
|
|||
// return 0;
|
|||
// }
|
|||
|
|||
// void powerOff() override {
|
|||
// // #ifdef HAS_GPS
|
|||
// // digitalWrite(GPS_VRTC_EN, LOW);
|
|||
// // digitalWrite(GPS_RESET, LOW);
|
|||
// // digitalWrite(GPS_SLEEP_INT, LOW);
|
|||
// // digitalWrite(GPS_RTC_INT, LOW);
|
|||
// // digitalWrite(GPS_EN, LOW);
|
|||
// // #endif
|
|||
|
|||
// // #ifdef BUZZER_EN
|
|||
// // digitalWrite(BUZZER_EN, LOW);
|
|||
// // #endif
|
|||
|
|||
// // #ifdef PIN_3V3_EN
|
|||
// // digitalWrite(PIN_3V3_EN, LOW);
|
|||
// // #endif
|
|||
|
|||
// // #ifdef PIN_3V3_ACC_EN
|
|||
// // digitalWrite(PIN_3V3_ACC_EN, LOW);
|
|||
// // #endif
|
|||
// // #ifdef SENSOR_EN
|
|||
// // digitalWrite(SENSOR_EN, LOW);
|
|||
// // #endif
|
|||
|
|||
// // set led on and wait for button release before poweroff
|
|||
// #ifdef LED_PIN
|
|||
// digitalWrite(LED_PIN, HIGH);
|
|||
// #endif
|
|||
// #ifdef BUTTON_PIN
|
|||
// while(digitalRead(BUTTON_PIN));
|
|||
// #endif
|
|||
// #ifdef LED_PIN
|
|||
// digitalWrite(LED_PIN, LOW);
|
|||
// #endif
|
|||
|
|||
// #ifdef BUTTON_PIN
|
|||
// nrf_gpio_cfg_sense_input(BUTTON_PIN, NRF_GPIO_PIN_NOPULL, NRF_GPIO_PIN_SENSE_HIGH);
|
|||
// #endif
|
|||
|
|||
// sd_power_system_off();
|
|||
// }
|
|||
}; |
|||
@ -0,0 +1,122 @@ |
|||
[muzi_base_duo] |
|||
extends = nrf52_base |
|||
board = muzi_base_duo |
|||
board_build.ldscript = boards/nrf52840_s140_v6.ld |
|||
build_flags = ${nrf52_base.build_flags} |
|||
-I src/helpers/nrf52 |
|||
-I lib/nrf52/s140_nrf52_6.1.1_API/include |
|||
-I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52 |
|||
-I variants/muzi_base_duo |
|||
-I src/helpers/ui |
|||
-D muzi_base_duo |
|||
-D PIN_USER_BTN=10 |
|||
-D USER_BTN_PRESSED=LOW |
|||
-D PIN_STATUS_LED=(32+3) |
|||
-D RADIO_CLASS=CustomLR1110 |
|||
-D WRAPPER_CLASS=CustomLR1110Wrapper |
|||
-D LORA_TX_POWER=22 |
|||
-D RF_SWITCH_TABLE |
|||
-D RX_BOOSTED_GAIN=true |
|||
-D P_LORA_BUSY=LORA_BUSY ; P0.7 |
|||
-D P_LORA_SCLK=LORA_SCLK ; P0.11 |
|||
-D P_LORA_NSS=LORA_NSS ; P0.12 |
|||
-D P_LORA_DIO_1=LORA_DIO_1 ; P1.1 |
|||
-D P_LORA_MISO=LORA_MISO ; P1.8 |
|||
-D P_LORA_MOSI=LORA_MOSI ; P0.9 |
|||
-D P_LORA_RESET=LORA_RESET ; P1.10 |
|||
-D LR11X0_DIO_AS_RF_SWITCH=true |
|||
-D LR11X0_DIO3_TCXO_VOLTAGE=3.0 |
|||
; -D ENV_INCLUDE_GPS=1 |
|||
build_src_filter = ${nrf52_base.build_src_filter} |
|||
+<helpers/*.cpp> |
|||
+<helpers/sensors> |
|||
+<helpers/nrf52/muzi_base_duo.cpp> |
|||
+<../variants/muzi_base_duo> |
|||
debug_tool = jlink |
|||
upload_protocol = nrfutil |
|||
|
|||
[env:muzi_base_duo_repeater] |
|||
extends = muzi_base_duo |
|||
build_flags = ${muzi_base_duo.build_flags} |
|||
-I examples/companion_radio/ui-orig |
|||
-D ADVERT_NAME='"muzi_base_duo Repeater"' |
|||
-D ADVERT_LAT=0.0 |
|||
-D ADVERT_LON=0.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
-D MAX_NEIGHBOURS=50 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
build_src_filter = ${muzi_base_duo.build_src_filter} |
|||
+<../examples/simple_repeater> |
|||
lib_deps = ${muzi_base_duo.lib_deps} |
|||
; stevemarple/MicroNMEA @ ^2.0.6 |
|||
|
|||
[env:muzi_base_duo_room_server] |
|||
extends = muzi_base_duo |
|||
build_flags = ${muzi_base_duo.build_flags} |
|||
-I examples/companion_radio/ui-orig |
|||
-D ADVERT_NAME='"muzi_base_duo Room"' |
|||
-D ADVERT_LAT=0.0 |
|||
-D ADVERT_LON=0.0 |
|||
-D ADMIN_PASSWORD='"password"' |
|||
-D ROOM_PASSWORD='"hello"' |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
-D RF_SWITCH_TABLE |
|||
build_src_filter = ${muzi_base_duo.build_src_filter} |
|||
+<../examples/simple_room_server> |
|||
lib_deps = ${muzi_base_duo.lib_deps} |
|||
; stevemarple/MicroNMEA @ ^2.0.6 |
|||
|
|||
[env:muzi_base_duo_companion_radio_usb] |
|||
extends = muzi_base_duo |
|||
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld |
|||
board_upload.maximum_size = 708608 |
|||
build_flags = ${muzi_base_duo.build_flags} |
|||
-I examples/companion_radio/ui-orig |
|||
-D MAX_CONTACTS=350 |
|||
-D MAX_GROUP_CHANNELS=40 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
; -D MESH_DEBUG=1 |
|||
-D OFFLINE_QUEUE_SIZE=256 |
|||
-D DISPLAY_CLASS=NullDisplayDriver |
|||
; -D PIN_BUZZER=25 |
|||
; -D PIN_BUZZER_EN=37 ; P1/5 - required for T1000-E |
|||
build_src_filter = ${muzi_base_duo.build_src_filter} |
|||
+<helpers/ui/buzzer.cpp> |
|||
+<../examples/companion_radio/*.cpp> |
|||
+<../examples/companion_radio/ui-orig/*.cpp> |
|||
lib_deps = ${muzi_base_duo.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
; stevemarple/MicroNMEA @ ^2.0.6 |
|||
end2endzone/NonBlockingRTTTL@^1.3.0 |
|||
|
|||
[env:muzi_base_duo_companion_radio_ble] |
|||
extends = muzi_base_duo |
|||
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld |
|||
board_upload.maximum_size = 708608 |
|||
build_flags = ${muzi_base_duo.build_flags} |
|||
-I examples/companion_radio/ui-orig |
|||
-D MAX_CONTACTS=350 |
|||
-D MAX_GROUP_CHANNELS=40 |
|||
-D BLE_PIN_CODE=123456 |
|||
-D BLE_TX_POWER=0 |
|||
-D QSPIFLASH=1 |
|||
; -D BLE_DEBUG_LOGGING=1 |
|||
; -D MESH_PACKET_LOGGING=1 |
|||
-D MESH_DEBUG=1 |
|||
-D OFFLINE_QUEUE_SIZE=256 |
|||
-D DISPLAY_CLASS=NullDisplayDriver |
|||
; -D PIN_BUZZER=25 |
|||
; -D PIN_BUZZER_EN=37 ; P1/5 - required for T1000-E |
|||
-D ADVERT_NAME='"@@MAC"' |
|||
build_src_filter = ${muzi_base_duo.build_src_filter} |
|||
+<helpers/nrf52/SerialBLEInterface.cpp> |
|||
+<helpers/sensors> |
|||
; +<helpers/ui/buzzer.cpp> |
|||
+<../examples/companion_radio/*.cpp> |
|||
+<../examples/companion_radio/ui-orig/*.cpp> |
|||
lib_deps = ${muzi_base_duo.lib_deps} |
|||
densaugeo/base64 @ ~1.4.0 |
|||
; stevemarple/MicroNMEA @ ^2.0.6 |
|||
end2endzone/NonBlockingRTTTL@^1.3.0 |
|||
@ -0,0 +1,96 @@ |
|||
#include <Arduino.h> |
|||
#include "target.h" |
|||
#include "variant.h" |
|||
// #include <helpers/sensors/MicroNMEALocationProvider.h>
|
|||
|
|||
muzi_base_duoBoard board; |
|||
|
|||
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI); |
|||
|
|||
WRAPPER_CLASS radio_driver(radio, board); |
|||
|
|||
VolatileRTCClock rtc_clock; |
|||
// MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
|
|||
|
|||
EnvironmentSensorManager sensors; // Added: Instantiate sensors (no GPS, as it's disabled)
|
|||
|
|||
#ifdef DISPLAY_CLASS |
|||
NullDisplayDriver display; |
|||
#endif |
|||
|
|||
#ifndef LORA_CR |
|||
#define LORA_CR 5 |
|||
#endif |
|||
|
|||
#ifdef RF_SWITCH_TABLE |
|||
static const uint32_t rfswitch_dios[Module::RFSWITCH_MAX_PINS] = { |
|||
RADIOLIB_LR11X0_DIO5, |
|||
RADIOLIB_LR11X0_DIO6, |
|||
RADIOLIB_LR11X0_DIO7, |
|||
RADIOLIB_LR11X0_DIO8, |
|||
RADIOLIB_NC |
|||
}; |
|||
|
|||
static const Module::RfSwitchMode_t rfswitch_table[] = { |
|||
// mode DIO5 DIO6 DIO7 DIO8
|
|||
{ LR11x0::MODE_STBY, {LOW, LOW, LOW, LOW }}, |
|||
{ LR11x0::MODE_RX, {HIGH, LOW, LOW, HIGH }}, |
|||
{ LR11x0::MODE_TX, {HIGH, HIGH, LOW, HIGH }}, |
|||
{ LR11x0::MODE_TX_HP, {LOW, HIGH, LOW, HIGH }}, |
|||
{ LR11x0::MODE_TX_HF, {LOW, LOW, LOW, LOW }}, |
|||
{ LR11x0::MODE_GNSS, {LOW, LOW, HIGH, LOW }}, |
|||
{ LR11x0::MODE_WIFI, {LOW, LOW, LOW, LOW }}, |
|||
END_OF_MODE_TABLE, |
|||
}; |
|||
#endif |
|||
|
|||
bool radio_init() { |
|||
//rtc_clock.begin(Wire);
|
|||
|
|||
#ifdef LR11X0_DIO3_TCXO_VOLTAGE |
|||
float tcxo = LR11X0_DIO3_TCXO_VOLTAGE; |
|||
#else |
|||
float tcxo = 1.6f; |
|||
#endif |
|||
|
|||
SPI.setPins(P_LORA_MISO, P_LORA_SCLK, P_LORA_MOSI); |
|||
SPI.begin(); |
|||
int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_LR11X0_LORA_SYNC_WORD_PRIVATE, LORA_TX_POWER, 16, tcxo); |
|||
if (status != RADIOLIB_ERR_NONE) { |
|||
Serial.print("ERROR: radio init failed: "); |
|||
Serial.println(status); |
|||
return false; // fail
|
|||
} |
|||
|
|||
radio.setCRC(2); |
|||
radio.explicitHeader(); |
|||
|
|||
#ifdef RF_SWITCH_TABLE |
|||
radio.setRfSwitchTable(rfswitch_dios, rfswitch_table); |
|||
#endif |
|||
#ifdef RX_BOOSTED_GAIN |
|||
radio.setRxBoostedGainMode(RX_BOOSTED_GAIN); |
|||
#endif |
|||
|
|||
return true; // success
|
|||
} |
|||
|
|||
uint32_t radio_get_rng_seed() { |
|||
return radio.random(0x7FFFFFFF); |
|||
} |
|||
|
|||
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { |
|||
radio.setFrequency(freq); |
|||
radio.setSpreadingFactor(sf); |
|||
radio.setBandwidth(bw); |
|||
radio.setCodingRate(cr); |
|||
} |
|||
|
|||
void radio_set_tx_power(int8_t dbm) { |
|||
radio.setOutputPower(dbm); |
|||
} |
|||
|
|||
mesh::LocalIdentity radio_new_identity() { |
|||
RadioNoiseListener rng(radio); |
|||
return mesh::LocalIdentity(&rng); // create new random identity
|
|||
} |
|||
@ -0,0 +1,30 @@ |
|||
#pragma once |
|||
|
|||
#define RADIOLIB_STATIC_ONLY 1 |
|||
#include <RadioLib.h> |
|||
#include <helpers/radiolib/RadioLibWrappers.h> |
|||
#include "muzi_base_duoBoard.h" |
|||
#include <helpers/radiolib/CustomLR1110Wrapper.h> |
|||
#include <helpers/ArduinoHelpers.h> |
|||
#include <helpers/SensorManager.h> |
|||
#include <helpers/sensors/LocationProvider.h> |
|||
#include <helpers/sensors/EnvironmentSensorManager.h> // Added: Include for EnvironmentSensorManager |
|||
#ifdef DISPLAY_CLASS |
|||
#include "NullDisplayDriver.h" |
|||
#endif |
|||
|
|||
|
|||
#ifdef DISPLAY_CLASS |
|||
extern NullDisplayDriver display; |
|||
#endif |
|||
|
|||
extern muzi_base_duoBoard board; |
|||
extern WRAPPER_CLASS radio_driver; |
|||
extern VolatileRTCClock rtc_clock; |
|||
extern EnvironmentSensorManager sensors; |
|||
|
|||
bool radio_init(); |
|||
uint32_t radio_get_rng_seed(); |
|||
void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); |
|||
void radio_set_tx_power(int8_t dbm); |
|||
mesh::LocalIdentity radio_new_identity(); |
|||
@ -0,0 +1,76 @@ |
|||
/*
|
|||
* variant.cpp |
|||
* Copyright (C) 2023 Seeed K.K. |
|||
* MIT License |
|||
*/ |
|||
|
|||
#include "variant.h" |
|||
#include "wiring_constants.h" |
|||
#include "wiring_digital.h" |
|||
|
|||
const uint32_t g_ADigitalPinMap[PINS_COUNT + 1] = |
|||
{ |
|||
0, // P0.00
|
|||
1, // P0.01
|
|||
2, // P0.02, AIN0 BATTERY_PIN
|
|||
3, // P0.03
|
|||
4, // P0.04, SENSOR_EN
|
|||
5, // P0.05, EXT_PWR_DETEC
|
|||
6, // P0.06, PIN_BUTTON1
|
|||
7, // P0.07, LORA_BUSY
|
|||
8, // P0.08, GPS_VRTC_EN
|
|||
9, // P0.09
|
|||
10, // P0.10
|
|||
11, // P0.11, PIN_SPI_SCK
|
|||
12, // P0.12, PIN_SPI_NSS
|
|||
13, // P0.13, PIN_SERIAL1_TX
|
|||
14, // P0.14, PIN_SERIAL1_RX
|
|||
15, // P0.15, GPS_RTC_INT
|
|||
16, // P0.16, PIN_SERIAL2_TX
|
|||
17, // P0.17, PIN_SERIAL2_RX
|
|||
18, // P0.18
|
|||
19, // P0.19
|
|||
20, // P0.20
|
|||
21, // P0.21
|
|||
22, // P0.22
|
|||
23, // P0.23
|
|||
24, // P0.24, LED_GREEN
|
|||
25, // P0.25, BUZZER_PIN
|
|||
26, // P0.26, PIN_WIRE_SDA
|
|||
27, // P0.27, PIN_WIRE_SCL
|
|||
28, // P0.28
|
|||
29, // P0.29, AIN5, LUX_SENSOR
|
|||
30, // P0.30
|
|||
31, // P0.31, AIN7, TEMP_SENSOR
|
|||
32, // P1.00
|
|||
33, // P1.01, LORA_DIO_1
|
|||
34, // P1.02
|
|||
35, // P1.03, EXT_CHRG_DETECT
|
|||
36, // P1.04
|
|||
37, // P1.05, LR1110_EN
|
|||
38, // P1.06, 3V3_EN PWR TO SENSORS
|
|||
39, // P1.07, PIN_3V3_ACC_EN
|
|||
40, // P1.08, PIN_SPI_MISO
|
|||
41, // P1.09, PIN_SPI_MOSI
|
|||
42, // P1.10, LORA_RESET
|
|||
43, // P1.11, GPS_EN
|
|||
44, // P1.12, GPS_SLEEP_INT
|
|||
45, // P1.13
|
|||
46, // P1.14, GPS_RESETB
|
|||
47, // P1.15, PIN_GPS_RESET
|
|||
255, // NRFX_SPIM_PIN_NOT_USED
|
|||
}; |
|||
|
|||
void initVariant() |
|||
{ |
|||
// All pins output HIGH by default.
|
|||
// https://github.com/Seeed-Studio/Adafruit_nRF52_Arduino/blob/fab7d30a997a1dfeef9d1d59bfb549adda73815a/cores/nRF5/wiring.c#L65-L69
|
|||
|
|||
pinMode(BATTERY_PIN, INPUT); |
|||
pinMode(EXT_CHRG_DETECT, INPUT); |
|||
pinMode(EXT_PWR_DETECT, INPUT); |
|||
pinMode(PIN_BUTTON1, INPUT); |
|||
pinMode(LED_PIN, OUTPUT); |
|||
pinMode(LED_BLUE, OUTPUT); |
|||
digitalWrite(LED_PIN, LOW); |
|||
} |
|||
@ -0,0 +1,150 @@ |
|||
/*
|
|||
* variant.h |
|||
* Copyright (C) 2023 Seeed K.K. |
|||
* MIT License |
|||
*/ |
|||
|
|||
#pragma once |
|||
|
|||
#include "WVariant.h" |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Low frequency clock source
|
|||
|
|||
#define USE_LFXO // 32.768 kHz crystal oscillator
|
|||
#define VARIANT_MCK (64000000ul) |
|||
// #define USE_LFRC // 32.768 kHz RC oscillator
|
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Power
|
|||
|
|||
#define NRF_APM // detect usb power
|
|||
// #define PIN_3V3_EN (38) // P1.6 Power to Sensors no power
|
|||
|
|||
#define BATTERY_PIN (0 + 31) // P0.31
|
|||
// #define BATTERY_CHARGING_INV (32 + 02) // P1.02
|
|||
// #define BATTERY_IMMUTABLE
|
|||
#define ADC_MULTIPLIER (1.537F) |
|||
|
|||
#define EXT_CHRG_DETECT (32+02) // P1.02 Muzi Base schematic shows there's a bat_chg status. That's stat2 on BQ25. if low, it's charging.
|
|||
#define EXT_PWR_DETECT (27) // P0.5 stat1 (power detect, basically) on bq25 is connected to pin 0.27
|
|||
|
|||
#define ADC_RESOLUTION (14) |
|||
#define BATTERY_SENSE_RES (12) |
|||
|
|||
#define AREF_VOLTAGE (3.3) |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Number of pins
|
|||
|
|||
#define PINS_COUNT (48) |
|||
#define NUM_DIGITAL_PINS (48) |
|||
#define NUM_ANALOG_INPUTS (6) |
|||
#define NUM_ANALOG_OUTPUTS (0) |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// UART pin definition
|
|||
|
|||
#define PIN_SERIAL1_RX (19) // P0.19 used for GPS RX
|
|||
#define PIN_SERIAL1_TX (20) // P0.20 used for GPS TX
|
|||
|
|||
|
|||
// #define PIN_SERIAL2_RX (17) // P0.17
|
|||
// #define PIN_SERIAL2_TX (16) // P0.16
|
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// I2C pin definition
|
|||
|
|||
#define HAS_WIRE (1) |
|||
#define WIRE_INTERFACES_COUNT (2) |
|||
|
|||
#define PIN_WIRE_SDA (4) // P0.4
|
|||
#define PIN_WIRE_SCL (6) // P0.6
|
|||
#define PIN_WIRE1_SDA (24) // P0.24 OLED I2C
|
|||
#define PIN_WIRE1_SCL (25) // P0.25 OLED I2C
|
|||
// #define I2C_NO_RESCAN
|
|||
// #define HAS_QMA6100P
|
|||
// #define QMA_6100P_INT_PIN (34) // P1.2
|
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// SPI pin definition
|
|||
|
|||
#define SPI_INTERFACES_COUNT (1) |
|||
|
|||
#define PIN_SPI_MISO (32+15) // internally connected to p1.15
|
|||
#define PIN_SPI_MOSI (32+14) // internally connected to p1.14
|
|||
#define PIN_SPI_SCK (32+13) // internally connected to p1.13
|
|||
#define PIN_SPI_NSS (32+12) // internally connected to p1.12
|
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Builtin LEDs
|
|||
|
|||
#define LED_BUILTIN (-1) |
|||
#define LED_BLUE (32+4) // P1.04
|
|||
#define LED_GREEN (32+3) // P1.03
|
|||
#define LED_PIN LED_GREEN |
|||
|
|||
#define LED_STATE_ON LOW |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Builtin buttons
|
|||
|
|||
#define PIN_BUTTON1 (10) // P0.10
|
|||
#define BUTTON_PIN PIN_BUTTON1 |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// LR1110
|
|||
|
|||
#define LORA_DIO_1 (32+8) // P1.08
|
|||
#define LORA_NSS (PIN_SPI_NSS) // P1.12
|
|||
#define LORA_RESET (32+12) // P1.12
|
|||
#define LORA_BUSY (32+11) // P1.11
|
|||
#define LORA_SCLK (PIN_SPI_SCK) |
|||
#define LORA_MISO (PIN_SPI_MISO) |
|||
#define LORA_MOSI (PIN_SPI_MOSI) |
|||
|
|||
#define LR11X0_DIO_AS_RF_SWITCH true |
|||
#define LR11X0_DIO3_TCXO_VOLTAGE 3.0 |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
|
|||
#define PIN_QSPI_SCK (0 + 3) |
|||
#define PIN_QSPI_CS (0 + 26) |
|||
#define PIN_QSPI_IO0 (0 + 30) |
|||
#define PIN_QSPI_IO1 (0 + 29) |
|||
#define PIN_QSPI_IO2 (0 + 28) |
|||
#define PIN_QSPI_IO3 (0 + 2) |
|||
|
|||
#define EXTERNAL_FLASH_DEVICES W25Q128JVPQ |
|||
#define EXTERNAL_FLASH_USE_QSPI |
|||
// // GPS
|
|||
|
|||
// #define HAS_GPS 1
|
|||
// #define GPS_RX_PIN PIN_SERIAL1_RX
|
|||
// #define GPS_TX_PIN PIN_SERIAL1_TX
|
|||
|
|||
// #define GPS_EN (43) // P1.11
|
|||
// #define GPS_RESET (47) // P1.15
|
|||
|
|||
// #define GPS_VRTC_EN (8) // P0.8
|
|||
// #define GPS_SLEEP_INT (44) // P1.12
|
|||
// #define GPS_RTC_INT (15) // P0.15
|
|||
// #define GPS_RESETB (46) // P1.14
|
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Temp+Lux Sensor
|
|||
|
|||
// #define SENSOR_EN (4) // P0.4
|
|||
// #define TEMP_SENSOR (31) // P0.31/AIN7
|
|||
// #define LUX_SENSOR (29) // P0.29/AIN5
|
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Accelerometer (I2C addr : ??? )
|
|||
|
|||
// #define PIN_3V3_ACC_EN (39) // P1.7
|
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Buzzer
|
|||
|
|||
// #define BUZZER_EN (37) // P1.5
|
|||
// #define BUZZER_PIN (25) // P0.25
|
|||
Loading…
Reference in new issue