added std_init to CustomLLCC68.h

src/helpers/CustomLLCC68.h

@@ -9,6 +9,76 @@ class CustomLLCC68 : public LLCC68 {
   public:
     CustomLLCC68(Module *mod) : LLCC68(mod) { }
 
+  #ifdef RP2040_PLATFORM
+    bool std_init(SPIClassRP2040* spi = NULL)
+  #else
+    bool std_init(SPIClass* spi = NULL)
+  #endif
+    {
+  #ifdef SX126X_DIO3_TCXO_VOLTAGE
+      float tcxo = SX126X_DIO3_TCXO_VOLTAGE;
+  #else
+      float tcxo = 1.6f;
+  #endif
+
+  #ifdef LORA_CR
+      uint8_t cr = LORA_CR;
+  #else
+      uint8_t cr = 5;
+  #endif
+
+  #if defined(P_LORA_SCLK)
+    #ifdef NRF52_PLATFORM
+      if (spi) { spi->setPins(P_LORA_MISO, P_LORA_SCLK, P_LORA_MOSI); spi->begin(); }
+    #elif defined(RP2040_PLATFORM)
+      if (spi) {
+        spi->setMISO(P_LORA_MISO);
+        //spi->setCS(P_LORA_NSS); // Setting CS results in freeze
+        spi->setSCK(P_LORA_SCLK);
+        spi->setMOSI(P_LORA_MOSI);
+        spi->begin();
+      }
+    #else
+      if (spi) spi->begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
+    #endif
+  #endif
+      int status = begin(LORA_FREQ, LORA_BW, LORA_SF, cr, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
+      // if radio init fails with -707/-706, try again with tcxo voltage set to 0.0f
+      if (status == RADIOLIB_ERR_SPI_CMD_FAILED || status == RADIOLIB_ERR_SPI_CMD_INVALID) {
+        #define SX126X_DIO3_TCXO_VOLTAGE (0.0f);
+        tcxo = SX126X_DIO3_TCXO_VOLTAGE;
+        status = begin(LORA_FREQ, LORA_BW, LORA_SF, cr, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
+      }
+      if (status != RADIOLIB_ERR_NONE) {
+        Serial.print("ERROR: radio init failed: ");
+        Serial.println(status);
+        return false;  // fail
+      }
+    
+      setCRC(1);
+  
+  #ifdef SX126X_CURRENT_LIMIT
+      setCurrentLimit(SX126X_CURRENT_LIMIT);
+  #endif
+  #ifdef SX126X_DIO2_AS_RF_SWITCH
+      setDio2AsRfSwitch(SX126X_DIO2_AS_RF_SWITCH);
+  #endif
+  #ifdef SX126X_RX_BOOSTED_GAIN
+      setRxBoostedGainMode(SX126X_RX_BOOSTED_GAIN);
+  #endif
+  #if defined(SX126X_RXEN) || defined(SX126X_TXEN)
+    #ifndef SX1262X_RXEN
+      #define SX1262X_RXEN RADIOLIB_NC
+    #endif
+    #ifndef SX1262X_TXEN
+      #define SX1262X_TXEN RADIOLIB_NC
+    #endif
+      setRfSwitchPins(SX126X_RXEN, SX126X_TXEN);
+  #endif 
+
+    return true;  // success
+  }
+
     bool isReceiving() {
       uint16_t irq = getIrqFlags();
       bool detected = (irq & SX126X_IRQ_HEADER_VALID) || (irq & SX126X_IRQ_PREAMBLE_DETECTED);