mirror of https://github.com/meshcore-dev/MeshCore
ripplebiz
1 year ago
committed by
GitHub
GitHub
10 changed files with 436 additions and 0 deletions
@ -0,0 +1,78 @@ |
|||
{ |
|||
"build": { |
|||
"arduino":{ |
|||
"ldscript": "nrf52840_s140_v6.ld" |
|||
}, |
|||
"core": "nRF5", |
|||
"cpu": "cortex-m4", |
|||
"extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA", |
|||
"f_cpu": "64000000L", |
|||
"hwids": [ |
|||
[ |
|||
"0x239A", |
|||
"0x00B3" |
|||
], |
|||
[ |
|||
"0x239A", |
|||
"0x8029" |
|||
], |
|||
[ |
|||
"0x239A", |
|||
"0x0029" |
|||
], |
|||
[ |
|||
"0x239A", |
|||
"0x002A" |
|||
], |
|||
[ |
|||
"0x239A", |
|||
"0x802A" |
|||
] |
|||
], |
|||
"usb_product": "ProMicro NRF52840", |
|||
"mcu": "nrf52840", |
|||
"variant": "promicro_nrf52840", |
|||
"variants_dir": "variants", |
|||
"bsp": { |
|||
"name": "adafruit" |
|||
}, |
|||
"softdevice": { |
|||
"sd_flags": "-DS140", |
|||
"sd_name": "s140", |
|||
"sd_version": "6.1.1", |
|||
"sd_fwid": "0x00B6" |
|||
}, |
|||
"bootloader": { |
|||
"settings_addr": "0xFF000" |
|||
} |
|||
}, |
|||
"connectivity": [ |
|||
"bluetooth" |
|||
], |
|||
"debug": { |
|||
"jlink_device": "nRF52840_xxAA", |
|||
"svd_path": "nrf52840.svd" |
|||
}, |
|||
"frameworks": [ |
|||
"arduino", |
|||
"zephyr" |
|||
], |
|||
"name": "ProMicro NRF52840", |
|||
"upload": { |
|||
"maximum_ram_size": 248832, |
|||
"maximum_size": 815104, |
|||
"speed": 115200, |
|||
"protocol": "nrfutil", |
|||
"protocols": [ |
|||
"jlink", |
|||
"nrfjprog", |
|||
"nrfutil", |
|||
"stlink" |
|||
], |
|||
"use_1200bps_touch": true, |
|||
"require_upload_port": true, |
|||
"wait_for_upload_port": true |
|||
}, |
|||
"url": "https://www.nologo.tech/en/product/otherboard/NRF52840.html", |
|||
"vendor": "Nologo" |
|||
} |
|||
@ -0,0 +1,63 @@ |
|||
#include <Arduino.h> |
|||
#include "faketecBoard.h" |
|||
|
|||
#include <bluefruit.h> |
|||
#include <Wire.h> |
|||
|
|||
static BLEDfu bledfu; |
|||
|
|||
static void connect_callback(uint16_t conn_handle) |
|||
{ |
|||
(void)conn_handle; |
|||
MESH_DEBUG_PRINTLN("BLE client connected"); |
|||
} |
|||
|
|||
static void disconnect_callback(uint16_t conn_handle, uint8_t reason) |
|||
{ |
|||
(void)conn_handle; |
|||
(void)reason; |
|||
|
|||
MESH_DEBUG_PRINTLN("BLE client disconnected"); |
|||
} |
|||
|
|||
bool faketecBoard::startOTAUpdate() { |
|||
// Config the peripheral connection with maximum bandwidth
|
|||
// more SRAM required by SoftDevice
|
|||
// Note: All config***() function must be called before begin()
|
|||
Bluefruit.configPrphBandwidth(BANDWIDTH_MAX); |
|||
Bluefruit.configPrphConn(92, BLE_GAP_EVENT_LENGTH_MIN, 16, 16); |
|||
|
|||
Bluefruit.begin(1, 0); |
|||
// Set max power. Accepted values are: -40, -30, -20, -16, -12, -8, -4, 0, 4
|
|||
Bluefruit.setTxPower(4); |
|||
// Set the BLE device name
|
|||
Bluefruit.setName("Faketec_OTA"); |
|||
|
|||
Bluefruit.Periph.setConnectCallback(connect_callback); |
|||
Bluefruit.Periph.setDisconnectCallback(disconnect_callback); |
|||
|
|||
// To be consistent OTA DFU should be added first if it exists
|
|||
bledfu.begin(); |
|||
|
|||
// Set up and start advertising
|
|||
// Advertising packet
|
|||
Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE); |
|||
Bluefruit.Advertising.addTxPower(); |
|||
Bluefruit.Advertising.addName(); |
|||
|
|||
/* Start Advertising
|
|||
- Enable auto advertising if disconnected |
|||
- Interval: fast mode = 20 ms, slow mode = 152.5 ms |
|||
- Timeout for fast mode is 30 seconds |
|||
- Start(timeout) with timeout = 0 will advertise forever (until connected) |
|||
|
|||
For recommended advertising interval |
|||
https://developer.apple.com/library/content/qa/qa1931/_index.html
|
|||
*/ |
|||
Bluefruit.Advertising.restartOnDisconnect(true); |
|||
Bluefruit.Advertising.setInterval(32, 244); // in unit of 0.625 ms
|
|||
Bluefruit.Advertising.setFastTimeout(30); // number of seconds in fast mode
|
|||
Bluefruit.Advertising.start(0); // 0 = Don't stop advertising after n seconds
|
|||
|
|||
return true; |
|||
} |
|||
@ -0,0 +1,69 @@ |
|||
#pragma once |
|||
|
|||
#include <MeshCore.h> |
|||
#include <Arduino.h> |
|||
#include <Wire.h> |
|||
|
|||
#define P_LORA_NSS 13 //P1.13 45
|
|||
#define P_LORA_DIO_1 11 //P0.10 10
|
|||
#define P_LORA_RESET 10 //P0.09 9
|
|||
#define P_LORA_BUSY 16 //P0.29 29
|
|||
#define P_LORA_MISO 15 //P0.02 2
|
|||
#define P_LORA_SCLK 12 //P1.11 43
|
|||
#define P_LORA_MOSI 14 //P1.15 47
|
|||
#define SX126X_POWER_EN 21 //P0.13 13
|
|||
#define SX126X_RXEN 2 //P0.17
|
|||
#define SX126X_TXEN RADIOLIB_NC |
|||
#define SX126X_DIO2_AS_RF_SWITCH true |
|||
#define SX126X_DIO3_TCXO_VOLTAGE (1.8f) |
|||
|
|||
#define PIN_VBAT_READ 17 |
|||
#define ADC_MULTIPLIER (1.815f) // dependent on voltage divider resistors. TODO: more accurate battery tracking
|
|||
|
|||
class faketecBoard : public mesh::MainBoard { |
|||
protected: |
|||
uint8_t startup_reason; |
|||
|
|||
public: |
|||
void begin() { |
|||
// for future use, sub-classes SHOULD call this from their begin()
|
|||
startup_reason = BD_STARTUP_NORMAL; |
|||
|
|||
pinMode(PIN_VBAT_READ, INPUT); |
|||
|
|||
#if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL) |
|||
Wire.begin(PIN_BOARD_SDA, PIN_BOARD_SCL); |
|||
#else |
|||
Wire.begin(); |
|||
#endif |
|||
|
|||
pinMode(SX126X_POWER_EN, OUTPUT); |
|||
digitalWrite(SX126X_POWER_EN, HIGH); |
|||
delay(10); // give sx1262 some time to power up
|
|||
} |
|||
|
|||
uint8_t getStartupReason() const override { return startup_reason; } |
|||
|
|||
#define BATTERY_SAMPLES 8 |
|||
|
|||
uint16_t getBattMilliVolts() override { |
|||
analogReadResolution(12); |
|||
|
|||
uint32_t raw = 0; |
|||
for (int i = 0; i < BATTERY_SAMPLES; i++) { |
|||
raw += analogRead(PIN_VBAT_READ); |
|||
} |
|||
raw = raw / BATTERY_SAMPLES; |
|||
return (ADC_MULTIPLIER * raw); |
|||
} |
|||
|
|||
const char* getManufacturerName() const override { |
|||
return "Faketec DIY"; |
|||
} |
|||
|
|||
void reboot() override { |
|||
NVIC_SystemReset(); |
|||
} |
|||
|
|||
bool startOTAUpdate() override; |
|||
}; |
|||
@ -0,0 +1,15 @@ |
|||
#include "variant.h" |
|||
#include "wiring_constants.h" |
|||
#include "wiring_digital.h" |
|||
|
|||
const uint32_t g_ADigitalPinMap[] = { |
|||
8, 6, 17, 20, 22, 24, 32, 11, 36, 38, |
|||
9, 10, 43, 45, 47, 2, 29, 31, |
|||
33, 34, 37, |
|||
13, 15 |
|||
}; |
|||
|
|||
void initVariant() |
|||
{ |
|||
} |
|||
|
|||
@ -0,0 +1,82 @@ |
|||
/*
|
|||
* variant.h |
|||
* Copyright (C) 2023 Seeed K.K. |
|||
* MIT License |
|||
*/ |
|||
|
|||
#pragma once |
|||
|
|||
#include "WVariant.h" |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Low frequency clock source
|
|||
|
|||
#define VARIANT_MCK (64000000ul) |
|||
|
|||
//#define USE_LFXO // 32.768 kHz crystal oscillator
|
|||
#define USE_LFRC // 32.768 kHz RC oscillator
|
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Power
|
|||
|
|||
#define PIN_EXT_VCC (21) |
|||
#define EXT_VCC (PIN_EXT_VCC) |
|||
|
|||
#define BATTERY_PIN (17) |
|||
#define ADC_RESOLUTION 12 |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Number of pins
|
|||
|
|||
#define PINS_COUNT (23) |
|||
#define NUM_DIGITAL_PINS (23) |
|||
#define NUM_ANALOG_INPUTS (3) |
|||
#define NUM_ANALOG_OUTPUTS (0) |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// UART pin definition
|
|||
|
|||
#define PIN_SERIAL1_TX (1) |
|||
#define PIN_SERIAL1_RX (0) |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// I2C pin definition
|
|||
|
|||
#define WIRE_INTERFACES_COUNT 2 |
|||
|
|||
#define PIN_WIRE_SDA (6) |
|||
#define PIN_WIRE_SCL (7) |
|||
#define PIN_WIRE1_SDA (13) |
|||
#define PIN_WIRE1_SCL (14) |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// SPI pin definition
|
|||
|
|||
#define SPI_INTERFACES_COUNT 2 |
|||
|
|||
#define PIN_SPI_SCK (2) |
|||
#define PIN_SPI_MISO (3) |
|||
#define PIN_SPI_MOSI (4) |
|||
|
|||
#define PIN_SPI_NSS (5) |
|||
|
|||
#define PIN_SPI1_SCK (18) |
|||
#define PIN_SPI1_MISO (19) |
|||
#define PIN_SPI1_MOSI (20) |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Builtin LEDs
|
|||
|
|||
#define PIN_LED (22) |
|||
#define LED_PIN PIN_LED |
|||
#define LED_BLUE PIN_LED |
|||
#define LED_BUILTIN PIN_LED |
|||
#define LED_STATE_ON 1 |
|||
|
|||
////////////////////////////////////////////////////////////////////////////////
|
|||
// Builtin buttons
|
|||
|
|||
#define PIN_BUTTON1 (6) |
|||
#define BUTTON_PIN PIN_BUTTON1 |
|||
|
|||
|
|||
Loading…
Reference in new issue