Merge 7d0109f182 into db232808aa

FLASHING.md

@@ -0,0 +1,35 @@
+# Flashing RAK13800 Ethernet Companion Targets
+
+Use the canonical PlatformIO target names:
+
+- `RAK_RAK13800_companion_radio_eth`
+- `RAK_RAK13800_companion_radio_eth_static_diag`
+
+These are RAK13800 Ethernet Companion board-support targets built on the RAK4631 MCU platform. The MCU, bootloader, SoftDevice, and board package remain RAK4631 / nRF52840, but the hardware stack being supported is `RAK 4631 / RAK13800 + W5100S`.
+
+## Production Target
+
+- Target: `RAK_RAK13800_companion_radio_eth`
+- Networking: DHCP first, or DHCP with static fallback
+- TCP port: `4403`
+- `ETH_DEBUG_LOGGING=0`
+- `FORCE_CLIENT_REPEAT=0`
+- `MAX_CONTACTS=128` unless RAM testing proves a higher value is safe
+
+## Static Diagnostic Target
+
+- Target: `RAK_RAK13800_companion_radio_eth_static_diag`
+- IP: `10.245.94.47`
+- Gateway: `10.245.94.33`
+- DNS: `10.245.94.33`
+- Subnet: `255.255.255.224`
+- TCP port: `4403`
+- `ETH_STATIC_ONLY=1`
+- `ETH_DEBUG_LOGGING=1`
+
+## Compatibility Aliases
+
+The following names may remain temporarily for compatibility:
+
+- `RAK_4631_companion_radio_eth_clean` -> `RAK_RAK13800_companion_radio_eth`
+- `RAK_4631_companion_radio_eth_static_diag` -> `RAK_RAK13800_companion_radio_eth_static_diag`

README.md

@@ -34,10 +34,32 @@ MeshCore provides the ability to create wireless mesh networks, similar to Mesht
 - Flash the MeshCore firmware on a supported device.
 - Connect with a supported client.
 
+### RAK13800 Ethernet Companion Targets
+
+- `RAK_RAK13800_companion_radio_eth` is the production board-support target.
+- `RAK_RAK13800_companion_radio_eth_static_diag` is the static diagnostic target.
+- The old `RAK_4631_companion_radio_eth_clean` and `RAK_4631_companion_radio_eth_static_diag` names remain compatibility aliases only.
+- Static diagnostic settings:
+  - IP `10.245.94.47`
+  - Gateway `10.245.94.33`
+  - DNS `10.245.94.33`
+  - Subnet `255.255.255.224`
+  - TCP port `4403`
+  - `ETH_STATIC_ONLY=1`
+  - `ETH_DEBUG_LOGGING=1`
+- Production settings:
+  - DHCP first or DHCP with static fallback
+  - TCP port `4403`
+  - `ETH_DEBUG_LOGGING=0`
+  - `FORCE_CLIENT_REPEAT=0`
+  - `MAX_CONTACTS=128` unless RAM testing proves a higher value is safe
+
 For developers:
 
 - Install [PlatformIO](https://docs.platformio.org) in [Visual Studio Code](https://code.visualstudio.com).
 - Clone and open the MeshCore repository in Visual Studio Code.
+- The RAK13800 Ethernet Companion board-support targets use the canonical PlatformIO env names `RAK_RAK13800_companion_radio_eth` and `RAK_RAK13800_companion_radio_eth_static_diag`.
+- These targets extend the RAK4631 MCU platform, but the supported hardware stack is `RAK 4631 / RAK13800 + W5100S`.
 - See the example applications you can modify and run:
   - [Companion Radio](./examples/companion_radio) - For use with an external chat app, over BLE, USB or Wi-Fi.
   - [KISS Modem](./examples/kiss_modem) - Serial KISS protocol bridge for host applications. ([protocol docs](./docs/kiss_modem_protocol.md))

VALIDATION.md

@@ -0,0 +1,30 @@
+# Validation for RAK13800 Ethernet Companion Targets
+
+Validate the canonical targets:
+
+- `RAK_RAK13800_companion_radio_eth`
+- `RAK_RAK13800_companion_radio_eth_static_diag`
+
+## What to Verify
+
+- The target name is the RAK13800 board-support name, not a generic RAK4631 label.
+- The build still extends the RAK4631 PlatformIO environment.
+- The static diagnostic target keeps:
+  - IP `10.245.94.47`
+  - Gateway `10.245.94.33`
+  - DNS `10.245.94.33`
+  - Subnet `255.255.255.224`
+  - TCP port `4403`
+  - `ETH_STATIC_ONLY=1`
+  - `ETH_DEBUG_LOGGING=1`
+- The production target uses:
+  - DHCP first or DHCP with static fallback
+  - TCP port `4403`
+  - `ETH_DEBUG_LOGGING=0`
+  - `FORCE_CLIENT_REPEAT=0`
+  - `MAX_CONTACTS=128` unless RAM testing proves a higher value is safe
+
+## Compatibility Check
+
+- Keep `RAK_4631_companion_radio_eth_clean` as an alias to `RAK_RAK13800_companion_radio_eth` if older scripts still use it.
+- Keep `RAK_4631_companion_radio_eth_static_diag` as an alias to `RAK_RAK13800_companion_radio_eth_static_diag` if older scripts still use it.

build.sh

@@ -14,15 +14,15 @@ Commands:
   build-firmware <target>: Build the firmware for the given build target.
   build-firmwares: Build all firmwares for all targets.
   build-matching-firmwares <build-match-spec>: Build all firmwares for build targets containing the string given for <build-match-spec>.
-  build-companion-firmwares: Build all companion firmwares for all build targets.
+  build-companion-firmwares: Build all companion firmwares for all build targets, including RAK_RAK13800 board-support targets.
   build-repeater-firmwares: Build all repeater firmwares for all build targets.
   build-room-server-firmwares: Build all chat room server firmwares for all build targets.
 
 Examples:
-Build firmware for the "RAK_4631_repeater" device target
+Build firmware for the "RAK_RAK13800_companion_radio_eth" device target
-$ sh build.sh build-firmware RAK_4631_repeater
+$ sh build.sh build-firmware RAK_RAK13800_companion_radio_eth
 
-Build all firmwares for device targets containing the string "RAK_4631"
+Build all firmwares for device targets containing the string "RAK_RAK13800"
 $ sh build.sh build-matching-firmwares <build-match-spec>
 
 Build all companion firmwares
@@ -42,11 +42,11 @@ Examples:
 Build without debug logging:
 $ export FIRMWARE_VERSION=v1.0.0
 $ export DISABLE_DEBUG=1
-$ sh build.sh build-firmware RAK_4631_repeater
+$ sh build.sh build-firmware RAK_RAK13800_companion_radio_eth
 
 Build with debug logging (default, uses flags from variant files):
 $ export FIRMWARE_VERSION=v1.0.0
-$ sh build.sh build-firmware RAK_4631_repeater
+$ sh build.sh build-firmware RAK_RAK13800_companion_radio_eth_static_diag
 EOF
 }
 

variants/rak4631/platformio.ini

@@ -232,6 +232,63 @@ lib_deps =
   ${rak4631.lib_deps}
   densaugeo/base64 @ ~1.4.0
 
+[env:RAK_RAK13800_companion_radio_eth]
+extends = rak4631
+board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
+board_upload.maximum_size = 712704
+build_flags =
+  ${rak4631.build_flags}
+  -I examples/companion_radio/ui-new
+  -D PIN_USER_BTN=9
+  -D PIN_USER_BTN_ANA=31
+  -D DISPLAY_CLASS=SSD1306Display
+  -D MAX_CONTACTS=128
+  -D MAX_GROUP_CHANNELS=40
+  -D ETH_DEBUG_LOGGING=0
+  -D FORCE_CLIENT_REPEAT=0
+  -D ADVERT_NAME='"RAK4631 RAK13800 Eth"'
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${rak4631.build_src_filter}
+  +<helpers/nrf52/SerialBLEInterface.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${rak4631.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:RAK_RAK13800_companion_radio_eth_static_diag]
+extends = rak4631
+board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
+board_upload.maximum_size = 712704
+build_flags =
+  ${rak4631.build_flags}
+  -I examples/companion_radio/ui-new
+  -D PIN_USER_BTN=9
+  -D PIN_USER_BTN_ANA=31
+  -D DISPLAY_CLASS=SSD1306Display
+  -D MAX_CONTACTS=128
+  -D MAX_GROUP_CHANNELS=40
+  -D ETH_STATIC_ONLY=1
+  -D ETH_DEBUG_LOGGING=1
+  -D FORCE_CLIENT_REPEAT=0
+  -D ADVERT_NAME='"RAK4631 RAK13800 Eth Diag"'
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${rak4631.build_src_filter}
+  +<helpers/nrf52/SerialBLEInterface.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${rak4631.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:RAK_4631_companion_radio_eth_clean]
+extends = RAK_RAK13800_companion_radio_eth
+
+[env:RAK_4631_companion_radio_eth_static_diag]
+extends = RAK_RAK13800_companion_radio_eth_static_diag
+
 [env:RAK_4631_terminal_chat]
 extends = rak4631
 build_flags =